"Chevrolet" – the SUV is gaining more and more popularity among car owners. No wonder, because the car is practical, reliable, and not get stuck in the first hole. Trips out of town on sedans are much better. Often fans of long trips and camping think about the use of additional equipment.
Tow bar for "Field" is a special hitch, is designed to connect car and trailer. Such a device allows you to carry additional cargo, which has no place in the cabin and Luggage compartment of the car.
If the vehicle itself poses a threat on the road, a car with a tow bar – a double threat. For this reason, the choice and installation of the equipment should be treated with the utmost seriousness.
Manufacturers of tow bars for "Fields" have the appropriate specialized equipment, all items are quality tested and have the necessary certificates of conformity.
The First models of "Fields" did not have the necessary attachment points of the tow bar, for this reason, car owners had to develop and install the equipment yourself or ask in the handicraft workshops that have created significant risks.
Self-production trailer suggested several types of installation:
1. Installation and mounting on the rails of the bumper.
2. Installing and securing the spars and the body.
This design did not pass any checks, therefore frequently became the reason dorozhno-transport incidents. In addition, the appearance of the installation has sometimes caused confusion among passers-by. Often, the client expressed the desire to use gas equipment, cylinders which were installed just at the rear of the car. For this reason the design had the attachment to the spars, and her appearance was quite strange.
Recommended
How does the rear bushing front arm and how many it serves?
The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...
Oil consumption in the engine. Six reasons
It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...
The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...
"Chevrolet", unlike its predecessor, has the necessary elements for the installation:
1. There are attachment points, which are reinforced threaded connections.
2. The site of attachment of the tow bar are available in any Chevy, but when you sell the model without the tow bar, they just stuck with tape.
For this reason, the owner of an SUV can cope with the installation of the tow bar, following all the necessary requirements. Now Tow bar with "Chevrolet" Perfectly complements the vehicle, ensuring safe operation on the road.
Improved model of the machine is allowed to make the tow not only a means for attaching the trailer, but also the element of protection of the bottom. Usability design is felt at the first application. Any distance the updated SUV will be on the shoulder.
For the safe installation and use of the tow bar need to know some rules:
If you decided to install a tow bar on the car yourself, then buy special equipment in an automotive shop and dealership. Before you purchase, check with your dealer and independently verify that this kit is designed for "Chevrolet Niva".
Standard kit includes the following elemente:
In addition to the kit should include installation instructions and certificate of quality.
The Process of equipment installation is simple and does not take much time. Some cope alone with the procedure in 10-15 minutes. The main rules of safe installation and operation in the future are the rules of Assembly and the use of only certified components.
Installation can be divided into two stages:
1. Installation of power elements.
2. Connectingthe outlet to the electrical wiring system of the car.
Tow bar for "Field" with their hands is:
Installing the tow bar for "Field" assumes the connection electronics. This process is quite complex and requires care, since this will depend on the performance of the car. Improper connection of the equipment combustion is possible with the electronics or wiring insulation.
For proper installation you'll need the wiring diagram of the car, which usually comes in the set. Additionally, look for a diagram of the pinouts receptacle.
The Process of connecting Electric outlet will consist of the following stages:
In stores is a fairly wide variety of models. Tow bar for "Field Chevrolet" you can find at the price from 2500 to 5000 rubles.
Therefore, Tow bar for "Field", price which is quite acceptable for most car owners – very handy and practical device. The quality and ease of use is especially appreciated by lovers of fishing, hunting and recreation. The installation of the equipment – a simple matter, just need to be careful and to follow instructions.
Article in other languages:
HI: https://tostpost.com/hi/cars/22261-niva.html
Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."
Related News
"IZH 350 Planeta Sport" – frisky Soviet bike
it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...
Brake pads VAZ-2110: how to replace?
Serviceable pads – a pledge not only your safety but also the safety of other road users. Excessive wear of these elements increases the risk of losing control of the vehicle and cause an accident. In order to avoid becoming...
Tires Pirelli Formula Ice: tests, reviews. Tires Pirelli Formula Ice 91t
In the choice of rubber for your car some of the drivers there are two extremes. Some believe that it is necessary to take the cheapest, because they still accurately go with them, and nothing happens. Others do not believe in the...
The principle of operation of ABS. Anti-lock braking system ABS. What is ABS in the car?
What is ABS (antilock braking system), rather, how the acronym stands for, now I know many drivers, and that's exactly what it blocks and what it's done, you know, just very curious. And this despite the fact that this system inst...
Carburetor "soleks 21073": characteristics, adjustment
the power supply System of a modern car is getting increasingly complex, yet simple, affordable and reliable carb will long serve the owners of older cars. Now gasoline cars are no longer available. But no there is no need of main...
Perforated brake discs: description, characteristics and types
Modern cars are equipped with a large number of electronic systems, without which we cannot get comfortable to drive. In electronics, manufacturers are also incorporating into the design of new components, which feature low weight...
Comments (0)
This article has no comment, be the first!