The power supply System of a modern car is getting increasingly complex, yet simple, affordable and reliable carb will long serve the owners of older cars. Now gasoline cars are no longer available. But no there is no need of maintenance of these machines. For example, carburetor “Solex” 21073 Dimitrov aggregate production plant still produced and successfully operates in the power systems of engines VAZ classical models, as well as front-wheel drive VAZ 2108, 2109. Also it can be found on the early models “tenth of the family”.
Despite its simplicity, this element of demand and popularity among motorists. Not just for “Field” set “Solex” 21073. Reviews about it are positive, and so, we need to know more about it and learn to configure it.
The Basic design of these devices was developed by the engineers of the French company Soleks.
Dimitrovgrad plant later received the production license, and all other modifications were made by experts here. On DASE was developed by the popular “soleks 21073”. Reviews about it only positive. The mechanism is easy to configure and is highly reliable. DAAZ-2108 is designed to work with engine capacity of 1.3 l for VAZ 2108 and 2109. “Solex” 21083 was revised for the 1.5-litre powertrains. These same mechanisms were equipped with models of the first batches VAZ 2110 with the ignition system based on a microprocessor. On the classical model of VAZ has established “Solex” 21053-1107010. Model VAZ “field” was completed mechanism “Solex” 21073-1107010. Now it was replaced by the injector.
Recommended
How does the rear bushing front arm and how many it serves?
The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...
Oil consumption in the engine. Six reasons
It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...
The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...
Carburetor “Solex” 21073 refers to the type of emulsion. Modifications it was originally installed on motors with contactless ignition. The device is characterized by the presence of two cameras equipped with throttle valves and dosing systems. Also, the device has the linking system for the first and for the second camera. A system is idling, but only for the first camera.
The Mechanism consists of two halves. The lower massive - upper. This half – the body of the device, and the upper part is for the carb cover. At the bottom of each chamber there is a flap rotary type mechanical drive type. At the top in the first chamber of the carburettor damper located for the supply of air. It is necessary to implement the launch of cold power unit. This detail is driven by a rope that goes into the cabin and connected to the lever responsible for the leak starting with vacuum system.
Running ‘soleks 21073” in the following way. Gasoline will get into the float chamber with the inlet connection – the fuel also passes through the filter mesh, where it is cleaned and goes through a needle valve. Camera with two-piece float, and the partitions between them are connected. They will have the same amount of gasoline. This design allows to considerably reduce the effect of tilting the body to the fuel level in the chamber.
This ensures more stable operation of the engine. As the chamber fills up, the float, pressing part of the needle valve blocks the access of fuel into chamber. So maintained a constant level of gasoline in the mechanism. Further from the float chamber the gasoline enters through the nozzles into the mixing wells. In these wells through the holes in the emulsion tubes or air jets the air enters. Then they petrol and air is mixed. The result is a fuel mixture. It gets in small and in large diffusers of the device. This is the main metering camera. Depending on the mode of operation of the engine, the carb can trigger certain mechanisms and systems. When the owner tries to start the engine “cold” to enrich the fuel mixture, it comes in the starter. His driver runs a salon – it is a suckling.
When the handle is extended as much as possible, the air intake valve of the first chamber is completely closed. Along with this, the throttle valve in the first chamber is opened to the distance of the starting gap. It can be set using the adjusting screw on carburetor “Solex”. Gap adjustment control to adjust the rpm at idle.
This mechanism is a special cavity, which is connected to the intake manifold. Also, the device has the diaphragm and the rod, which is connected to the air vent. After the motor is started in the intake manifold there is a vacuum. It affects the stem of the diaphragm, thus opening the choke. If the handle leaks return to normal position, this will reduce the starting clearance.
The parameters of the gaps depend on the geometrical characteristics of the lever and does not configurable. As for the throttle the second chamber, thewhen the choke is pulled out it is in a locked state.
This node is necessary in order to supply the combustion chamber with a combustible mixture at the minimum speed. Thanks to this system, the power unit does not stall when no load. The fuel in the system gets on the main jet in the first chamber. Through a nozzle of the twentieth, where it is then mixed with oxygen enters the fuel system through the air valve. This mechanism allows to ensure stable operation of the engine at idle with no load.
Then the fuel mixture gets into the first chamber through a channel located under the throttle. Fuel the mechanism leading to the outlet port XX is closed by a screw. This adjusting screw which can be adjusted to change the characteristics of the carb. The operation of the engine at idle on the mechanism of “soleks 21073” also set this element. Due to it is determined by the clearance of the throttle of the first chamber in the mode XX.
Also, the device of the mechanism has a accelerator pump and economizer. These nodes are designed for fuel mixture of the engine when it is operating in a loaded mode.
So we looked at the device “Solex”. The carb adjustment will help to set the optimum mode when the engine will run as efficiently as possible and at the same time fuel consumption is not too high. First, you need to start and slightly warm motor. Then dismantle the fuel hose and the carb cap. After disconnecting the cable choke and twisted the cover off the device.
It must be removed as evenly as possible and gently, so as not to damage the float. Then with a ruler or caliper to measure the distance to each of the cameras. You need to measure from the mating planes to the edge of the gasoline. This size should be about 24 mm. If it is bigger or smaller then adjust the parameter using the binding of the float. The device is then reassembled, start engine and warm up it.
Many car owners, namely, beginners often buy old cars and do not know how to tune the carb correctly. The result – loss of power, high fuel consumption, swimming speed and other problems. After the level adjustment is successfully completed, adjust the idle speed. It is highly recommended to stop the engine. You'll need a flat-blade screwdriver and time. On the sole of the mechanism has a hole. It is the screw that is responsible for the quality of the mixture. Twist it until it stops. However, don't get too zealous.
Then from the end position screw Unscrew five turns. Further, the engine give birth without suckling. Unscrew the screw - carburetor 21073 will regulate the rpm of the motor. Then twist the item again. Rotate until then, until the operation of the power unit will be as stable as possible. Rotate the screw slowly. When the motor would be quieter, its twisting no more than one turn. In the result, the idle will be around 900. But if the engine stalls, slightly increase.
These are the most important rules of how to adjust the carburetor “Solex” (or “Field” he goes in or out of “seven”, doesn't matter). Setting allows you to improve the performance of the motor to stabilize the idle. The carb is good because it can be configured with a minimal set of tools in all conditions. But time moves forward, and cars with this type of power system < / span>Becomes Less.
Article in other languages:
AR: https://tostpost.com/ar/cars/20585-soleks-21073.html
BE: https://tostpost.com/be/a-tamab-l/38227-karbyuratar-soleks-21073-haraktarystyk-regulyavanne.html
DE: https://tostpost.com/de/autos/37825-vergaser-solex-21073-eigenschaften-anpassen.html
HI: https://tostpost.com/hi/cars/22257-soleks-21073.html
JA: https://tostpost.com/ja/cars/20230-soleks21073.html
KK: https://tostpost.com/kk/avtomobil-der/38635-karbyurator-soleks-21073-sipattamasy-retteu.html
PL: https://tostpost.com/pl/samochody/40194-ga-nik-soleks-21073-dane-techniczne-regulacja.html
PT: https://tostpost.com/pt/carros/39835-carburador-soleks-21073-caracter-sticas-ajuste-de.html
TR: https://tostpost.com/tr/arabalar/35087-karb-rat-r-soleks-21073-zellikleri-ayarlama.html
Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."
Related News
"IZH 350 Planeta Sport" – frisky Soviet bike
it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...
Perforated brake discs: description, characteristics and types
Modern cars are equipped with a large number of electronic systems, without which we cannot get comfortable to drive. In electronics, manufacturers are also incorporating into the design of new components, which feature low weight...
Trucks GAZ-3307: device and specifications
Domestic trucks GAZ-3307 belong to the fourth family of trucks, the average tonnage from the Gorky automobile plant. Side version began to be produced in 1989. Five years later, the car was improved, equipped with a diesel engine ...
Jeep "Willis": features and photo
Jeep “jeep” – the car is a legend, passed the road from the Volga river to Berlin, crossed the deserts of Africa, snaking their way through the Asian jungle. The concept still serves as the basis for the creation...
Adjusting the alignment of the wheels. How to adjust the alignment. Stand to adjust the camber-toe
Today, at any STO proposed adjustment of the alignment of the wheels. However, car owners can carry out this procedure independently. So they can learn how to better understand and feel your car.a HUNDRED or yourself?Mechanics in ...
How to charge gyrometer right?
the World does not stand still, now our lives are new inventions, such as gyrometer. You always want to know what it is and what it eats. Later, the questions arise: what types are, how to charge gyrometer what to do to prolong th...
Comments (0)
This article has no comment, be the first!