The wheel is an important technical element of the vehicle

All the basic controls (throttle stick, clutch levers and brake switches turns and the signal of the rear view mirror) is mounted on the handlebar of the motorcycle. From this detail affects not only the efficiency of performing various maneuvers while riding, but in many ways the safety of both the motorcyclist and other road users.

Varieties of motorcycle handlebars

The shape and Size of the rudder depends on the class of the motorcycle. Of course, the manufacturers set the bikes up this important technical element in such a way they find most proper and convenient. Many of the motor-fans are quite satisfied with the regular wheel, is mounted on the motorcycle in its construction (as a rule, all vehicles produced, focusing on a man of average height). But there is a sufficient number of motorcyclists who are not satisfied with the wheel mounted (it either does not fit their dimensions or are not able to receive a comfortable fit, or not satisfied by their appearance). As well as the handlebars should be comfortable, and most importantly to provide comfort and driving safety there is a need for its replacement.

Today, the market represented a large number of varieties of handlebars for a motorcycle that can be installed instead of standard products: the direct, low, high, H-shaped, universal adjustable height, tilt and swivel, and so on.

Important! When selecting a product for replacement be sure to measure the diameter, or difficulties with the installation (and sometimes the impossibility of such) can not be avoided.

Replace the regular mounting

It would Seem that such a technical site like mount motorcycle handlebar difficult to subject to tuning. However, the manufacturers of Moto accessories has developed a special fixture that allows you to extend a normal rack, which is attached to the wheel. These products are very useful, for example, people of high growth (that is when you need to install the stock handlebar in a higher position). These inserts under the handlebars release as a fixed length (18 to 50 mm) and with the possibility of vertical adjustment (up/down) and horizontally (forward/backward).

Recommended

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

The Price of such devices from the German manufacturer SW-MOTECH depending on size, features and brand of motorcycle varies from 3100 to 8500 rubles.

Steering Damper

Bumps in the road (bumps, holes, tram or railway crossings) is transmitted to the wheel significant vibration. This leads to an uncontrolled swinging, thereby reducing the control bike and traffic safety. To prevent this unpleasant phenomenon, install the steering damper of the motorcycle. The principle of operation of this device is very similar to the action of the shock absorbers wheels: it substantially dampens unwanted vibrations of the steering wheel and provides the ability to make very quick changes in direction. Structurally, the damper consists of a housing and a cylinder with a movable rod. The housing is attached to the frame of the motorcycle, stock – to a rotating part of the steering system (usually plugs or traverse Peru).

Contemporary motorcycles (such as sports, and large road) be equipped with a steering damper already under construction at the factory. However, if your bike does not have this device, it is possible to produce this useful technical tuning yourself. Leading manufacturers of stabilizers steering (HYPERPRO, Ohlins) produce certain products for specific models of motorcycles BMW, Ducati, Harley Davidson, Honda, Kawasaki, Suzuki, Yamaha, and universal (all different sizes). The price of original dampers – from 16,000 to 21,000 rubles. Copies from little-known manufacturers can be bought much cheaper.

Handle for motorcycle

Replacement handles of a wheel of a motorcycle – the easiest and most affordable way of tuning their two-wheeled pet. Sometimes it is necessary to do due to the fact that the standard of the product is worn or has worn in the fall. And some riders just want to improve grip gloves control or reduce the vibration transmitted from the steering wheel on the hands. Others change the regular handles to change the look of the bike.

The Choice of this equipment is very varied, both in price and in design and materials from which they are made. So bright-red ergonomic Ariete MX HALF WAFFLE from polymer plastics, can be purchased at a price of 520 to 600 rubles, and a set of anti-vibration rubber hand grips with aluminum inserts HG020 from Rizoma will cost from 1300 to 1400 rubles.

Fans maximize the season and to go even in rainy and cool weather can be installed on the handlebar grips are heated.

Holders for additional devices

To Use a mobile phone or Navigator while driving, if they are not mounted on the bike, uncomfortable, and most importantly - unsafe. For fixing these essential and useful gadgets designed special holders on the handlebars of the motorcycle. They are placed so that they do not interfere with use of the controls, and at the same time, was available for use. Usually in a standard set of such devices includes a bracket foreasy mounting on the handlebars, and a waterproof case with a transparent top and quick-release locking mechanism that is attached to the back side. The choice is quite wide, so you can easily choose the size of such a device, in accordance with the size of a smartphone, browser or tablet.

Such additional motorcycle accessories like a cigarette lighter or charger USB connector, sold, as a rule, complete with holder for mounting on the handlebars of the motorcycle.

In conclusion

Any tuning (whether it be a replacement of standard steering, its mounting or the installation of additional fasteners) in the first place should not interfere with driving the vehicle and reduce traffic safety. Therefore, the change in stock of goods and installation of additional accessories must be approached carefully and thoroughly. Selecting a proven and reliable producer – an important part of this process.