How to connect a router D-Link DIR-300. Firmware, configuration, testing

Date:

2018-03-23 02:15:14

Views:

578

Rating:

1Like 0Dislike

Share:

Table of contents:

In this article you will gradually described not only how to connect a router D-Link DIR-300 to a local network, but how to configure it correctly. Also provides a test procedure as part of a wireless network and a wired segment. All this will allow even a novice to computer expert with this router to access the Internet from any PC or mobile device.

how to connect a router d link dir 300

The Advantages and disadvantages of this model router

The Following points the benefits can be attributed to such a network device like a router D-Link DIR-300:

  • The firmware of the router is functioning stably and without problems.
  • Low value (up to 2000 rubles).
  • Great functionality, which is more than enough to create any small computer networks for home or office.
  • Enough equipment to immediately after purchase you can configure and begin to use immediately.
  • Easy to set up and use.
  • High degree of reliability, which is characteristic of any device with D-Link logo.

But on the downside this network device can be referred only one time — support for wireless standards transmit information 802.11 b and g versions. On more recent versions - n and ac - in this case not talking. Itself network the device was released quite a long time, and at the beginning of its sales was relevant only 802.11 g. As a result, developers were limited to only this version.

Features

This model can boast the following technical specifications:

  • 4 RJ-45 port for wired network segments (they are on the perimeter are painted in yellow and are referred to as LAN X, where X is the port number from 1 to 4).
  • 1 input port to connect the input wire from the provider (on the edge of it is painted in blue color and is signed as the INTERNET).
  • 1 detachable antenna with a gain of 5dB.
  • Operating frequency-2.4 GHz.
  • Maximum data transfer rate-54 Mbps.
  • Supply Voltage 5 And the current is 1.2 A.
  • Power consumption — 4 watt.

router d link dir 300 connect

Recommended

How to get out of

How to get out of "Skype" on the "Android" and not only

How to get out of "Skype" "Android"? This question bothers many users. The thing is that the messenger is not so difficult. But there are features that are only for mobile versions. To log out of Skype in this case more difficult than it seems. But i...

Kingo ROOT: how to use the program to gain administrative rights on Android

Kingo ROOT: how to use the program to gain administrative rights on Android

The Gadgets on the platform Android regained the lion's share of the market. Developers are continually perfecting the OS, trying to fit the needs of the users, but from year to year admit palpable mistake: forbid the owner to "stuffing" of his gadge...

How to get from Stormwind to Tanaris: practical tips

How to get from Stormwind to Tanaris: practical tips

World of Warcraft is an iconic MMORPG, uniting millions of players around the world. There are many locations and puzzles, secret trails and larger, but rather dangerous paths. Sooner or later, every player chose the side of the Alliance, we have to ...

Package contents

Before connecting the router D-Link DIR-300 and configure it, let's deal with included in this network device. It includes the following:

  • The router.
  • Manual.
  • Fastening System for mounting the router on a wall or in a vertical position on any horizontal surface.
  • Power supply with the output settings of 5 V and 1.2 A.
  • Meter twisted pair cable with crimped connectors.
  • CD-ROM with an electronic version of documentation and necessary application software.
  • Warranty card.

Install Location

Fixed the installation location plays an important role in the quality of coverage that provides router D-Link DIR-300. Reviews indicate that it needs to be as close to the center of the room. With the exception of the presence of nearby metallic surfaces, which will be "quenching" signal. Also place the router must be stationary outlet for the organization of power supply of the network device. Another important component in this case — it is possible to easily strip the input compressed twisted pair from the provider. Namely starting from the previously listed conditions, choose the location of the router in the office, apartment or house.

how to connect wifi router d link dir 300

The First connection and configuration

The easiest way to set software configuration parameters on a temporary basis for any router. By this algorithm, which we will describe in this article how to configure a router D-Link DIR-300. The connection in this case is performed on a temporary basis. The input wire from the ISP configuration step is not needed, and the router can be installed in any convenient location. Next to the system unit of a PC or laptop and a free outlet. After you install the router connect power supply unit into the socket, and the wire from it — into the corresponding socket of the network device. Complete meter twisted pair with one end installed in any available port RJ-45 yellow, and the second — into the socket of the network card of the PC.

Next, the voltage applied to the router and wait until it finishes loading (30-60 seconds). After this, run any available on the computer browser and in address bar typed 192.168.0.1. In the next step, press Enter. Then in the query window, you must enter a user name and password. In this case they are the same — admin. After filling the fields, click on button Log In. In response, opens the basic configuration window of the router. Then, go to the Internet Setup menu (located in upper right corner). In the future, select settings Wizard. Then the software setup consists of the following steps:

  • Set the connection type to the equipment of the provider (Rroe, DHCP, L2TP, or Static IP RTR). This information provided by the provider in the contract for the provision of services. After checking the requisite box, click the button “Next”.
  • Specify connection settings (user name, password, type the network address, if it is a static method of addressingenter the required values). This information is also provided by the provider. Fill only the specified values and the rest do not touch.
  • The next step is to enter the wireless network name and password to connect to it.
  • For security purposes, change the default password to access the router settings and confirm it.
  • Then, specify your time zone.
  • Saved changes.

Turn Off the router and dismantle a temporary scheme.

router d link dir 300 reviews

Transfer to a permanent location

The next step is to move the router to a permanent location. Next, let's understand how to connect a WiFi router D-Link DIR-300 on a permanent basis. The input wire from the provider is connected to the blue port, near which is an inscription INTERNET. All network devices that are connected using twisted-pair cable connected to the yellow ports using the wires previously connected to this place. The power supply is installed in a stationary socket and the wire from it connects to the socket of the router. Next, turn the toggle switch on the back side of the network device and then wait it to load. It takes from 30 seconds to 1 minute. After that start checking the router.

Testing

After all previously described it is necessary to check the correct operation of network equipment. On any connected PC, you must launch a browser and enter in its address line, for example, google.ru. Then press Enter. In response should appear on the starting page of the search giant. If not, then go to settings network connections in the PC and check their correctness. Everything should be configured so that the network address or DNS computer receives automatically.

Now let's deal with how to connect a router D-Link DIR-300 and any mobile gadget (smartphone or tablet) using Wi-Fi technology. To do this, go to this menu ‘setup”. Select "Wireless networks” and then Wi-Fi. This included the transmitter and start the search for all available wireless networks. Then choose the name that you specified in the previous step. Then enter the password to connect to the wireless network. In the next step close the configuration window and launch any of the available browsers and likewise check the performance of the network.

router d link dir 300 firmware

Results

This article describes not only how to connect a router D-Link DIR-300 to a computer network, but also how to configure it properly and test the transfer of information. The algorithm settings are very simple, and it forces any user.


Article in other languages:

AR: https://tostpost.com/ar/computers/11428-d-link-dir-300.html

BE: https://tostpost.com/be/kamputary/20470-yak-padklyuchyc-router-d-link-dir-300-prashy-ka-nalada-testavanne.html

DE: https://tostpost.com/de/computer/20473-so-verbinden-sie-router-d-link-dir-300-firmware-konfiguration-testen.html

ES: https://tostpost.com/es/los-ordenadores/20491-c-mo-conectar-el-router-d-link-dir-300-el-firmware-configuraci-n-prueb.html

HI: https://tostpost.com/hi/computers/11439-300.html

JA: https://tostpost.com/ja/computers/11439-d-link-dir-300.html

KK: https://tostpost.com/kk/komp-yuterler/20461-alay-wi-fi-d-link-dir-300-t-gu-ornatu-test-leu.html

PL: https://tostpost.com/pl/komputery/20433-jak-pod-czy-router-d-link-dir-300-firmware-ustawienia-testy.html

PT: https://tostpost.com/pt/computadores/20428-como-conectar-o-roteador-d-link-dir-300-firmware-configura-o-testes.html

TR: https://tostpost.com/tr/bilgisayarlar/20471-nas-l-ba-lamak-i-in-y-nlendirici-d-link-dir-300-firmware-kurulum-test.html

UK: https://tostpost.com/uk/komp-yuteri/20452-yak-p-dklyuchiti-router-d-link-dir-300-proshivka-nalashtuvannya-testuv.html

ZH: https://tostpost.com/zh/computers/12222-d-link-dir-300.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

How to make screenshots of images on the computer — some simple tips

How to make screenshots of images on the computer — some simple tips

every day working on the computer at home or office, users occasionally need to make a print screen of the window or the whole screen, for example, to report a bug in the software complex the it guy to show a colleague how exactly...

Zengaming: reviews, registration gameplay

Zengaming: reviews, registration gameplay

Zengaming need to register, then comes the search for the enemy, and if the gamer wins the battle, you get coins, they are called coinsi. Further, the coin change on skins. But how to play Zengaming what are the comments?Registrat...

The graphics tablet. In searching for a universal device for work and drawing

The graphics tablet. In searching for a universal device for work and drawing

In the field of computer peripherals in his time appeared a lot of devices and add-ons that extend the functionality of a personal computer. Some of the designs were dead-end branches, and some have been developed on such a scale ...

Deck 3 arena Clash royale. Assembly tips

Deck 3 arena Clash royale. Assembly tips

In many online projects, people tend not to stop there. In the Clash royale 3-I arena (Barbarians) is the first difficult test on the road beginners. Despite the fact that it's not even half way to the top, from that moment, the p...

Filling And Restoration Of Cartridges

Filling And Restoration Of Cartridges

refilling the cartridge is possible even at home. However, it has its limit refills and parts wear. Fast, high-quality refill cartridges are indispensable for office work or other institution. Therefore, the restoration of a cartr...

Audio amplifiers-computer - review

Audio amplifiers-computer - review

Sometimes it happens that the power of the playback of your audio gadget is not enough. Of course, that the market has a large variety of physical amps, but before to buy them, you can try to increase sound with the help of specia...