The Atmega8. Programming Atmega8 for beginners

Date:

2018-05-10 17:00:46

Views:

947

Rating:

1Like 0Dislike

Share:

Table of contents:

The Atmega8 are the most popular representatives of his family. In many ways they owe, on the one hand, ease of operation and straightforward structure, with another - quite wide functionality. This article looks at the programming Atmega8 for beginners.

General information

atmega8 programmingMicrocontrollers are everywhere. You can find them in refrigerators, washing machines, phones, factory machines and a large number of other technical devices. Microcontrollers are both simple and extremely complex. Latest offer significantly more features and functionality. But to understand the difficult technique will not work. You first need to learn something simple. And as a sample will be taken from the Atmega8. Programming it is not complicated thanks to the competent architecture, and friendly interface. Besides, he is the owner of performance sufficient to use in most Amateur devices. Moreover, they apply even in the industry. In the case of Atmega8 programming involves knowledge of languages such as AVR (C/Assembler). Where do you start? The development of this technology is possible in three ways. And everyone chooses where to start with Atmega8

  1. Programming using the Arduino.
  2. Purchase a ready-made device.
  3. Self-Assembly of a microcontroller.

We will be considered the first and third paragraph.

Arduino

programming atmega8 usbaspThis is a comfortable platform is designed as an electronic designer, perfect for quick creation of various devices. The Board already have everything you need in the form of the microcontroller, its binding and programmer. Having gone this route, the person will receive the following benefits:

  1. Low threshold requirements. No need to have special skills and abilities for the development of technical systems.
  2. Wide range of items will be available for connection without additional training.
  3. Quick start of development. With Arduino you can skip to the creating devices.
  4. The Presence of a large number of training materials and examples of implementations of various designs.

But there are certain disadvantages. So, the Arduino programming Atmega8 does not allow to dive deeper into the world of the microcontroller and to understand the many useful aspects. In addition, you will have to learn a programming language that differs from that applied to the AVR (C/Assembler). And again, Arduino has a rather narrow range of models. Therefore, sooner or later you need to use a microcontroller that is not used in circuit boards. But overall this is a good way to work with the Atmega8. Programming via the Arduino will allow you to get a confident start in the world of electronics. Humans are unlikely to give up because of failures and problems.

Recommended

How to get out of

How to get out of "Skype" on the "Android" and not only

How to get out of "Skype" "Android"? This question bothers many users. The thing is that the messenger is not so difficult. But there are features that are only for mobile versions. To log out of Skype in this case more difficult than it seems. But i...

Kingo ROOT: how to use the program to gain administrative rights on Android

Kingo ROOT: how to use the program to gain administrative rights on Android

The Gadgets on the platform Android regained the lion's share of the market. Developers are continually perfecting the OS, trying to fit the needs of the users, but from year to year admit palpable mistake: forbid the owner to "stuffing" of his gadge...

How to get from Stormwind to Tanaris: practical tips

How to get from Stormwind to Tanaris: practical tips

World of Warcraft is an iconic MMORPG, uniting millions of players around the world. There are many locations and puzzles, secret trails and larger, but rather dangerous paths. Sooner or later, every player chose the side of the Alliance, we have to ...

Self-Assembly

Thanks to the friendly design they can make themselves. Because it needs cheap, available and simple components. This will allow you to become familiar with the device Atmega8 microcontroller, programming which after Assembly will seem easier. If necessary you can select additional components for a specific task. True, there are certain disadvantages-complexity. You can assemble a microcontroller when there is no need of knowledge and skills is not easy. This option we consider.

What you need to build?

programming arduino atmega8Initially, you need to get yourself Atmega8. Programming the microcontroller without him, you know, impossible. It will cost a few hundred rubles – while providing decent functionality. There is also the question of how it will be implemented by programming the Atmega8. USBAsp – this is a pretty good device, which proved itself from the best side. But you can use any other programmer. Or build it yourself. But in this case there is a risk that if poorly created, it will turn the microcontroller into the broken plastic piece and iron. Not interfere with the presence of a breadboard and jumpers. They are not mandatory, but will save time and nerves. And finally – need a power source to 5V.

Programming Atmega8 for beginners example

atmega8 programming for beginnersLet's look at how, in General terms, is the creation of a device. So, let's say that we have a microcontroller, led, resistor, programmer, connecting wires, breadboard and power supply. The first step – writing firmware. Under her understand the instruction set for the microcontroller that is presented as the end of the file having a special format. It is necessary to register the connection of all elements and the interaction with them. After that you can start building circuits. On the leg of the VCC should be powered. Any other, designed to work with devices and items that are connected first resistor and then the led. The power first depends on the nutritional needs of the second. They can look at this formula: R=(Up-Ups)/Is. Here p-is the power and s – led. Let's imagine that we have led, 2V consuming and requires a supply current of 10 mA, translate to moreconvenient for mathematical operations view and get 0.01 A. Then the formula will look as follows: R=(5V-2V)/0.01 A=3V/0.01 A=300 Ohms. But in practice it is often impossible to find the perfect item. Therefore taken the most appropriate. But you need to use a resistor with a resistance higher than the value obtained by mathematical. Through this approach we will extend the term of its service.

What next?

programming atmega8 built-in variables and functionsSo we have a small scheme. Now we have to connect to the microcontroller programmer and record in his memory the firmware that was created. There is one point! Building a schema, you must create it so that the microcontroller it was possible to flash it without desoldering. This will save time, nerves and prolong the service life of the elements. Including the Atmega8. In-circuit programming, it should be noted, requires knowledge and skills. But it also allows you to create more sophisticated designs. Indeed, it often happens that during the desoldering items damaged. After that, the circuit is ready. Can apply the voltage.

Important points

atmega8 in-system programmingI Want to give kids helpful tips about programming Atmega8. Built-in variables and functions do not change! To flash the device generated by the program, preferably after checking for the absence of “eternal cycles” that will block any other intervention, and with the use of a good transmitter. In the case of using crafts for these purposes, you should be mentally prepared to exit the microcontroller from the system. When you flash the device with a programmer, you should connect the corresponding outputs, VCC, GND, SCK, MOSI, RESET, MISO. And do not break safety! If the technical specifications provided that it should be powered at 5V, then you need to stick to such a voltage. Even the use of elements 6B may negatively tell on the performance of the microcontroller and reduce its service life. Of course, battery to 5V have certain differences, but generally, everything is within reasonable limits. For example, the maximum voltage will stay at 5.3 V.

Training and skills

Fortunately, the Atmega8 is a very popular microcontroller. Therefore, to find like-minded people or just knowledgeable and capable people is not difficult. If you don't want to reinvent the wheel, but just want to solve a certain problem, it is possible to find the desired scheme on the world wide web. By the way, here's a hint: although in the Russian segment of robotics is quite popular, but if there is no response, you should look it up in the English language – it contains a high amount of information. If there is some doubt in the quality of available advice, you can look for the book, which deals with Atmega8. Fortunately, the manufacturer takes into account the popularity of their development and provides them specialized literature, where experienced people can tell what and how, and give examples of the operation of the device.

Is it Hard to start creating something of their own?

atmega8 programming via arduinoEnough to have 500-2000 rubles and a few free evenings. This time is more than enough to familiarize with the architecture of the Atmega8. After a little practice you can easily create your own projects, to perform certain tasks. For example, a robotic arm. One Atmega8 be more than enough to pass the basic motor functions of the fingers. Of course, this is quite a difficult task, but quite feasible. Subsequently generally you can create complicated things that will need dozens of microcontrollers. But this is all ahead, it is necessary to obtain good school practice on something simple.


Article in other languages:

AR: https://tostpost.com/ar/computers/5062-atmega8-atmega8.html

BE: https://tostpost.com/be/kamputary/9016-m-krakantrolery-atmega8-pragramavanne-atmega8-dlya-pachatko-ca.html

DE: https://tostpost.com/de/computer/9016-mikrocontroller-atmega8-programmierung-atmega8-f-r-anf-nger.html

ES: https://tostpost.com/es/los-ordenadores/9022-los-microcontroladores-atmega8-programaci-n-atmega8-para-principiantes.html

HI: https://tostpost.com/hi/computers/5065-atmega8-atmega8.html

JA: https://tostpost.com/ja/computers/5062-atmega8-atmega8.html

KK: https://tostpost.com/kk/komp-yuterler/9020-mikrokontrollerler-atmega8-ba-darlamalau-atmega8-dlya-nachinayuschih.html

PL: https://tostpost.com/pl/komputery/9019-mikrokontrolery-atmega8-programowanie-atmega8-dla-pocz-tkuj-cych.html

PT: https://tostpost.com/pt/computadores/9015-microcontroladores-atmega8-a-programa-o-do-atmega8-para-iniciantes.html

TR: https://tostpost.com/tr/bilgisayarlar/9024-mikrodenetleyiciler-atmega8-programlama-atmega8-yeni-ba-layanlar-i-in.html

UK: https://tostpost.com/uk/komp-yuteri/9020-m-krokontroler-atmega8-programuvannya-atmega8-dlya-pochatk-vc-v.html

ZH: https://tostpost.com/zh/computers/5477-atmega8-atmega8.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

We produce network cable with your hands

We produce network cable with your hands

I Think everybody knows what a network cable. With it, you will be able to combine the two computers directly or to connect to the network. In this article I want to tell you how to make a network cable with your hands. It is very...

Where to enter cheats in Clash of Clans and is it possible?

Where to enter cheats in Clash of Clans and is it possible?

"clash of clans" is one of the most popular multiplayer computer games. It is distributed on mobile platforms or through social networks, so you don't have to download a large client, and wait for loading for a very long time. Man...

The battery for the motherboard: what is needed and how to replace

The battery for the motherboard: what is needed and how to replace

the computer quite a lot of devices that affect its performance. If some system can do, most of the details support the overall condition of the computer. Most of the users know about the video card, processor, motherboard and oth...

System requirements for GTA 5. GTA 5 requirements for PC

System requirements for GTA 5. GTA 5 requirements for PC

every year, gamers around the world await the release of some of the projects. Of course, game developers treat their customers is just countless number of different projects, but many of them are "Amateur". It is unlikely that on...

How to insert a song into a song: techniques and instructions

How to insert a song into a song: techniques and instructions

Sometimes, working with multimedia programs, there is a need to establish one audio to another, or substitution in the original movie audio tracks on the one that you need. Fortunately, in our time, this is easily doable. There ar...

Printer HP DeskJet 2050: reviews, manual. How to refill HP DeskJet 2050?

Printer HP DeskJet 2050: reviews, manual. How to refill HP DeskJet 2050?

One of the cheapest in the domestic market, printer HP DeskJet 2050 for many years to maintain a leading position in sales and positive customer feedback. Why is it so popular among the owners of this homely at first glance, the p...