Water cooling your hands

If you play powerful games or you for some reason are not satisfied with regular cooling of the computer, you'll now learn how to make a water cooling system with their hands. Ready to buy – expensive and not everyone can afford it. It's easier to buy the parts and do it yourself. The Internet described many different ways, but we will focus on the best of them (in my opinion).

The Main task – to make cooling radiator along with the pump and surge tank to the balcony. In order for water cooling computer, your hands work efficiently, you must move the computer into the one closest to the balcony corner. Using the punch you need to drill two holes into which two hoses passing. One of them will have a hose and the other – “return”. Still need to hold on to balcony cable 12V from the computer power supply.

Next, water cooling with your hands requires the following actions. This is the connection line of the surge tank. Fasten to, and to the other fitting with the help of a fluoroplastic tape. In the drilled holes is threaded the cable and hoses. Using a hot air gun they are placed on the radiator, pump and waterblock with expansion tank they can dress up and no Hairdryer. If you miss the connection with silicone, that would be great. Clamped all the hoses with automotive clamps. They will need six pieces.

To water cooling with their hands was more effective, I advise you to fill in a automotive antifreeze as a coolant. All accessories that are on the balcony, it is better to put in Polukarov. As a material suitable promotional plastic which are connected with superglue.

Recommended

How to get out of "Skype" on the "Android" and not only

How to get out of "Skype" "Android"? This question bothers many users. The thing is that the messenger is not so difficult. But there are features that are only for mobile versions. To log out of Skype in this case more difficult than it seems. But i...

Kingo ROOT: how to use the program to gain administrative rights on Android

The Gadgets on the platform Android regained the lion's share of the market. Developers are continually perfecting the OS, trying to fit the needs of the users, but from year to year admit palpable mistake: forbid the owner to "stuffing" of his gadge...

How to get from Stormwind to Tanaris: practical tips

World of Warcraft is an iconic MMORPG, uniting millions of players around the world. There are many locations and puzzles, secret trails and larger, but rather dangerous paths. Sooner or later, every player chose the side of the Alliance, we have to ...

Now you need threaded in casing and tubing. This is done through the back by removing the plugs. The waterblock should be lubricated thermal compound, then secure it to the processor. All water cooling with their hands ready!

This system works for me for three months without any complaints. But it is fair to note that I installed a clear hose, silicone, and instead of antifreeze in the system was flooded with distilled water. After a month of operation, the water became rusty and pipes due to its flexibility, completely kinked. After that it was decided to replace all the silicone tubes reinforced, the system was completely flushed. The corrosion appeared as a result of contact of the radiator with water.

After the upgrade is water cooling your hands provides a CPU temperature around 25 degrees Celsius. And when it's cold and window is open the balcony to air out, the processor is not heated above 15 degrees.

Of Course, such water cooling your hands has another advantage. When buying a new computer, you will not have to make any drastic changes in its cooling system. All the main elements will be on your balcony. Use your health!