Storage water heater of indirect heating principle of operation, connection, reviews

Water Heaters of indirect heating of water in recent times are in high demand. The dimensions of the model are quite cumbersome. Parameter nominal power they have starts from 2 kW. For large families of devices of this type are suitable wonderful. Before purchasing the device is important to consider the performance. While components play an important role. To further understand the water heaters of the indirect type, it is necessary to understand the principle of their work.

The device

On the market are a variety of indirect water heaters. The working principle of the device consists in heating coils. Initially, the voltage of 220 V is supplied to the power supply. Further activated control system. The input pressure of the device depends on the valve. To protect the system from over-voltage necessary fuse. Setting the temperature of the water is due to the controller. For conduction heating elements are quite different.

The water Flow occurs through the pipe. In some cases, a flexible hose. The heat carrier is connected with the insulator. With increasing power of the model spiral heating element inside the tank is heated. The warmed water flows through the outlet. In this case, the control unit is used with a stabilizer. Control limit of temperature is carried out with the thermometer.

How to connect the device?

The Connection of the indirect heater is fairly simple. In the first place is fixed directly to the tank. Most often with this purpose, the horizontal stops. In this case, a lot depends on the size of the heater. After fixing the tank it is necessary to begin connecting your pipe to the water system. For this purpose the metal clip. Directly connecting the devices have screw-type. The outlet is connected with mixer. The network cable connects to the socket.

Recommended

IPTV settings "Rostelecom". IPTV channels

Analog TV is gradually disappearing into the background. His place faster pace is a free IPTV Rostelecom. And it's really convenient, because digital channels to look better because of better picture, sound. But first you need to clarify some points....

IMEI: how to change the phone yourself

If you need to change the IMEI on your phone, this article will provide complete and correct information about what is IMEI code, what is it for, and how to change it.What is IMEI you May have already encountered this concept, then you know that the ...

Washing machine Bosch MAXX 4: operating instructions

All well-known manufacturer of Bosh, before you present to the world another new, not only conducts many tests, but uses all available methods to ensure maximum safety. To washing machine MAXX 4 pleased his master as long as possible, the set to her ...

Description water heater Gorenje GV 200

The Specified indirect heater Gorenje has a high nominal power. In this case a diffuser is applied to low sensitivity. The input pressure of the device is equal to 3.3 bar. The system of protection from corrosion applied first class. Output pressure is approximately 7.2 bar. The sealer supplied as a standard feature from the foam.

The Pipe from the water heater made entirely of plastic. The heating element devices are well resistant to corrosion. On the inside of the tank deposited cobalt layer. If you believe the experts, the problems with the diffuser occur infrequently. Buy presents indirect heater type, at a price of 33 thousand rubles.

Opinion about models Drazice OKCV 200

These boilers (water heaters) indirect heating have a lot of advantages. First and foremost, they features high capacity. Model works at a frequency of 55 Hz. Problems with the diffuser occur infrequently. The inlet pressure of the heater is 3.8 bar. System of corrosion protection in this case is not provided.

According to experts, the problems with the leaking tank do not occur frequently. The pressure stabilizer in this water heater of the indirect type is not provided. Output the system pressure is at 2.2 bar. The connector in this case is used with the gasket. Special attention is given to safety. The maximum permissible overload is at the level of 7.3 A. Polystyrene filter is used with the gasket. The diffuser is applied to the system without a filter. To purchase this water heater is at a price of 29 thousand rubles.

Customer Reviews on Drazice OKCV 230

Data are the combined water heaters of indirect heating in recent times are in high demand. Diffuser they have designed for a pressure of 3.3 bar. If you believe the customer reviews, then make sure that the coupling is able to withstand heavy loads. The input resistance of the model is at the level of 4.2 bar. System of corrosion protection is used the first class. Sleeve is directly under the pad. Spiral heater in the device is 3 kW. The performance of the system is around 280 litres. To buy the water heater presents series at a price of 23 thousand rubles.

Description water heater Drazice OKCV 250

This water heater of the indirect type is able to boast high wattage. The system works at a frequency of 34 Hz. The insulator provides a wired type. The filter device is made entirely of polymer. The ultimate conductivity of the coolant is at the level of 10 MK. If you believe the reviews of customers, problems with the filter occur infrequently.

Corrosion Protection provided by the third class. The width of the coil does not exceed 23 cm Minimum conductivity of the coolant is at the level of 8 MK. The pressure stabilizer is located in the lower part of the structure. The inner side of the tank the treated enamel. The diameter of the upper tube is 2.3 cm Output system pressure is around 2 bar. The diameter of the lower pipe is 21 cm. the Anode active protection this water heater is available. The inlet pressure of the presented model is around 3.6 bar.

The Filter from limescale available. The diffuser of the heater is applied the pulse type. The flange of the model is made entirely of stainless steel. The tank inner side is fully treated enamel. Above the diffuser feature a wide seal. Lead pipe in the device is used on 2.2 see the Thermostat is used with the sensor. To buy this water heater, the user is able at a price of 34 thousand.

Opinion about models Atlantic CWH 80

The water Heater of this series has a lot of advantages. First and foremost, buyers point out interesting design and compactness. Rated power of the heater represented by the series equals 4.5 kW. Insulation to protect the system. Filter models are made entirely of plastic.

The outlet pressure of the heater is set at 2.1 bar. The performance model of the series is around 240 liters. On the inside of the tank deposited cobalt layer. Inlet pressure is approximately 4.5 bar. To purchase this water heater of the indirect type, the user is able at the price of 27 thousand.

Customer Reviews about Atlantic CWH 90

This indirect heater lately in great demand. Reviews he usually gets for a reliable system of protection. The energy efficiency is around 89 %. Optimal temperature is 70 degrees. The gasket at the water heater are protected by connective sleeve. System performance the maximum is 340 liters. Fuse the model applies a unidirectional type.

In the lower part of the structure is the outlet pipe. The thermostat in this case is used with the sensor. The diffuser of the model a pulse type. Inlet pressure configuration is 3.3 bar. The time of heating to 50 degrees does not exceed 35 minutes. The diameter of the outlet pipe is as much as 2.3 see On the market, this indirect heater is not more than 33 thousand rubles.

Description water heater Tesy GCV 9S

These water heaters of indirect heating reviews mostly get positive. Many buyers have noted the perfect heating element. From corrosion it is 100% secure. Problems with the input filter are very rare. Over a heating element installed wired connector. Inlet pressure max is equal to 3.7 bar.

The inner side of the tank treated with cobalt. Directly nominal capacity is around 4 kW. The ultimate conductivity of the coolant does not exceed 10 MK. The spiral heater has a small diameter. Polystyrene filter this water heater is not provided. The model is about 29 thousand rubles.

Opinion about models Tesy GCV 3S

Presents the indirect heater is manufactured with two outlet valves. Over a helical electrical heating element is a polystyrene filter. The maximum conductivity of the coolant is 12 MK. The diameter of the upper tube is equal to 1.4, see the indicated rated power of the heater is 5 kW. Over polystyrene filter heater there is a wire insulator.

The Spiral heater is made entirely of stainless steel. If you believe the customer reviews, the temperature is adjusted without problems. Under the tank is installed the wire connector. According to many buyers, the diffuser in the device are protected well. Problems with the flange are very rare. The maximum performance of the heater of the indirect type equals to 348 litres. Cobalt layer on the inside of the tank is applied.

Threshold inlet pressure tries...