Abash for bath: review, features, technology installation and reviews

The Range of the market constantly updated with new and new materials that are used today in the construction of not only professionals, but also by private masters. In the list of traditional and budget decisions for the bath should be allocated to products made from such woods as:

• Lime;
• Topol;
• The aspen.

Recently this list has replenished with another abalam, which can be called a rare breed.

Overview

Abash – a giant tree that grows in the Equatorial forests of Africa. Krone is available on the top, therefore, the trunk is devoid of knots. It can not but rejoice joiners and carpenters. Wood can have color from creamy white to straw yellow. Between the core and the sapwood has no special differences.

In Russia, this wood appeared in 90-ies. Its cost is quite high, but it has gained popularity among consumers very quickly. Abash for bath – is still that the red tree house. This stuff is elite, and is more expensive than traditional wood. Such a high cost due to the place of growth, because the path to Russia was a long one.

Wood

Abash for the bath is great, it has low thermal conductivity, thanks to this Board even when exposed to high temperatures, do not burn the human skin in the sauna or bath. However, this breed has many other useful properties, among them:

• Resistance to mechanical stress;
• Nonsusceptibility to shrink;
• Compatibility with the wood of other varieties;
• Permanence of color even with prolonged use.

When heating the material will not secrete resin. For a long time it is not deformed. Wood will remain dry, even if the humidity in the room reaches 12%. The ends of the material slowly absorbs moisture, but when compared with the wooden planks, the latter quite actively wet.

Abash (for the bath, this indicator is of great importance) has a high density, but responds well to treatment, so it is easy to implement manipulation. The wood is well included screws. It is possible to hammer in nails, not out of fear that the material will be covered with cracks. It can be tinted. This grade of wood can be used not only for lining the interior surfaces of the sauna or baths, but also for home decoration. The material has a low conductivity, so in rooms fresh in summer and warm in winter.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Reviews

Abash for bath has many positive characteristics that trigger appropriate responses. For example, the maximum load on the material can reach 280 kg per square centimeter. On the curves this value is 528 kg per square centimeter. Consumers like the high density, which reaches 390 kg per cubic meter.

Negative feedback

Abash for a bath is a luxury grade wood, but it has its drawbacks. The main drawback, according to buyers, is the high cost. In addition, this wood comes on the market in small quantities. This is because Africa-a troubled continent. Consumers emphasize that the area of growth of this tree today are reduced, this fact can not be called a sad.

Technology installation siding

Lining for the bath is great. To do it you can. You can use the rails. They allow for the covering of walls pretty quickly and efficiently. If you want to update the surface you will be able to do this without difficulty.

Each subsequent Board siding is installed in the groove of the previous one, and the ledge is worn galvanized claimer, which is a special clip. It is fixed on the rail of the batten screw and a screw or galvanized nail. Abachi for the bath, the price is quite high, installed on a particular technology. At the final stage, it involves the cutting of the last products that the master was free to insert the panel in the remaining space. Mount performs by nails or screws.

The Second option to install wainscot

To date, there are several ways to mount the lining in the bath. You can use one more technology that requires the attachment of the last elements so that the fastener remains open.

The product should drill the holes for the cap screws self-tapping screws. To deepen, it must be 1/2 its thickness. As soon as the screw is tightened, the hole is closed with a wooden pin and ground. It is important to consider in the process of steam operation, the attachment can dry up and become more visible.

Using the nails during installation

Lining for baths, which price is 270 RUB. per meter or 3240 rubles. per square meter, can be installed with nails. Note, however, that this approach quite often leads to marriage. It's hard to imagine that nothing will be corrupted at the same time.

If the length of the liningis 2.5 m, then you will have to score about 6 nails products with a width of 100 mm. If you have a brick wall, the length of which is equal to 10 m, it will take 600 units. Master must have special skills to carry out the work without marriage. The nail should be started in the groove and drive it further into the mounting rail. Hat recessed inside the nail set, so it does not interfere with the installation of the next element.

Choosing abachi baths, price must be taken into consideration. For example, the thermal material of extra quality will cost you 325 RUB. per meter or 3900 RUB per square meter. In this case, as in the previous, we are talking about products with a size of 12 x 92 mm.

Conclusion

The Decoration in the bath, as in the case of rooms for other purposes, is the final stage of construction and repair. In order for the walls turned out to be not only aesthetically pleasing, but also qualitative, can be used to abash baths, price in Moscow, this material was referred to above. Although it is quite high compared to analog solutions, but consumers choose this veneer more often, because it has unique properties.