Rovnitel for a floor

Date:

2018-05-10 07:00:27

Views:

531

Rating:

1Like 0Dislike

Share:

Table of contents:

Smooth the surface – a necessary condition for the further laying of flooring, whether parquet, laminate, tile, etc. After all, laid the basis of defects in the coating will be subjected to deformation or cracking, and invested a lot of money it will take to wind. Only a perfectly flat floor can provide the best conditions for long-term and efficient operation of all types of flooring, as well as create the atmosphere of coziness and comfort in the room.

The Modern market offers a wide choice of the latest materials to solve this problem, the most popular of which is the dry mix for the floor. It can also be called “liquid floor” or “self-leveling floors”. Like all brilliant, its structure is very simple.

The dry mix for floor screed is a cement based, with addition of sand and chemical components. It is intended for leveling the substrate surface for the further laying of floor coverings. Such mixtures are produced in dry form and are prepared (diluted with water) directly on the site. “screeds” copes with the alignment surface in the presence of fluctuations 5-80 mm, the mixture tends to harden quickly (after 6 hours it is already possible to walk on the floor), so it is successfully used for initial tightening and final alignment of the sexes through one application. Such features levelling mixes significantly simplify and accelerate the process of installation base.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Ready solution easily fits as it has the ability of self-levelling, creating after drying perfectly flat smooth surface, which subsequently do not require grinding. This significantly reduces labor costs during installation and helps to extend the life of the coating.

All screeds are conventionally divided into two groups.

  1. Rovnitel for a floor of the initial (coarse) alignment. It has a larger fraction of components that allows to make the initial tie layer is quite thick.
  2. Finish floor levelling mix for the floor. This mixture is intended for the final alignment of the floor and give a perfect smoothness of its surface.

There is another kind of self-leveling screeds-floor levelling mix for the wooden floor. It can be used to restore and smooth the surface of wood flooring. In its composition contains special fibres and components that improve adhesion of the mixture with a wooden coatings.

For efficiency, use levelling mixes with their installation must be observed some rules.

  1. Indoor Temperature and the temperature of the substrate for laying the mortar should be from 10 to 25C.
  2. You Need to exclude the possibility of drafts in the room where the work is conducted.
  3. The Base must be very solid and completely dry. It is strictly forbidden to put the dry mix for floor freshly poured cement or concrete.

Self-Leveling compounds are used in sand-cement, concrete and other not subjected to the deformation of the cement bases, which are more than 28 days.

As for the reason, there are some rules that must be followed to work was successful, and that later no problems with the floor. It must have considerable strength, to be dry, flat and load-bearing capacity. Before you apply a floor levelling mix with the surface it is recommended to remove the paint coatings, peeling off elements, bitumen, oil stains and other contaminants that may affect adhesion. For better adhesion before beginning work on the surface of the base should be applied 1-2 coats of primer.


Article in other languages:

AR: https://tostpost.com/ar/cars/7586-what-is-the-exam-in-the-traffic-police.html

BE: https://tostpost.com/be/a-tamab-l/13550-shto-zh-uya-lyae-saboy-ekzamen-u-d-bdr.html

DE: https://tostpost.com/de/autos/13553-was-ist-eine-pr-fung-in-der-verkehrspolizei.html

ES: https://tostpost.com/es/coches/13560-que-es-un-examen-en-el-gbdd.html

HI: https://tostpost.com/hi/cars/7592-what-is-the-exam-in-the-traffic-police.html

JA: https://tostpost.com/ja/cars/7588-what-is-the-exam-in-the-traffic-police.html

KK: https://tostpost.com/kk/avtomobil-der/13553-b-l-b-ld-red-emtihan-gibdd.html

PL: https://tostpost.com/pl/samochody/13540-co-to-jest-egzamin-do-policji.html

PT: https://tostpost.com/pt/carros/13534-o-que-um-exame-de-pol-cia-de-tr-nsito.html

TR: https://tostpost.com/tr/arabalar/13556-nedir-bu-s-nav-traf-k-polisi.html

UK: https://tostpost.com/uk/avtomob-l/13550-scho-zh-yavlya-soboyu-spit-v-gibdd.html

ZH: https://tostpost.com/zh/cars/8252-what-is-the-exam-in-the-traffic-police.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

The covering of facade ceramic panels: pros and cons

The covering of facade ceramic panels: pros and cons

the exterior walls of the building are no less important than the arrangement of its internal surfaces. It helps to insulate the building, protect the facade from destruction and makes it more presentable. Today, for these purpose...

Methods of leveling floor with their hands: technology, materials

Methods of leveling floor with their hands: technology, materials

Everyone knows that the floor has great importance in different areas. It is not only the comfort of movement, and durability of any floor covering. Therefore, after the construction of the house, each trying to give it my full at...

How to drill porcelain tiles?

How to drill porcelain tiles?

Porcelain has qualities such as high durability and unique strength. These characteristics create some difficulties in processing the material. It is important to note the high fragility, which completely eliminates the possibilit...

Reproduction of honeysuckle cuttings and division of the Bush

Reproduction of honeysuckle cuttings and division of the Bush

Berries of honeysuckle – one of the earliest, have a pleasant sour-sweet taste, ripen in unison and delight gardeners first delicious crop. To increase the number of bushes in the garden, or refresh old, it is possible to gr...

Conductive adhesive

Conductive adhesive

When you create a electronic equipment and devices applied conductive adhesive. It is used for mounting electronic parts chips and should have the appropriate parameters for electrical and thermal resistance.In this article we wil...

Do the boiler with their hands

Do the boiler with their hands

Life in the suburbs has many advantages. But it has its drawbacks. So many problems happen with the organization heating. Gas to conduct expensive, and fuss with solid fuel boilers and furnaces are impressed not all. The solution ...