Infrared warm floor: pros and cons. Infrared warm floor under the tile: installation. Best infrared warm floor

Date:

2019-04-13 08:00:35

Views:

547

Rating:

1Like 0Dislike

Share:

Table of contents:

Not so long ago for floor heating, it was decided to use only a cable or hydraulic system. But already today it is becoming more common infrared heating system.

Main advantages

infrared warm floor pros and cons

Infrared warm floor, the pros and cons it is recommended to consider at the stage of purchase of materials has a lot of advantages. Among the main advantages are the possibility of fast installation due to the lack of need for additional work, which is true in the case if the floor is perfectly smooth.

Infrared Warm floor, the disadvantages which must also be taken into consideration, can be installed on any flooring, you do not need to equip the screed or to prepare the Foundation for other technology if it is already the place to be.

Another added benefit is that the system works with the use of the thermostat, it allows you to properly adjust the temperature inside the room, and the film changes mode will evenly warm or cool, changing the climate inside. If you have decided to choose for heating their own homes infrared warm floor, the pros and cons of such a system you should definitely consider.

Preserving humidity

infrared warm floor

Experts point out that heating of the room by infrared radiation, the humidity level is not changing, and the temperature near the floor is higher compared to the one that is kept at the level of the ceiling. Those users who are concerned about the health of their loved ones often choose these heating systems because they produce a therapeutic effect, as well as contribute to the prevention of several diseases.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Main disadvantages of infrared sex

infrared warm floor installation

You have decided to buy infrared warm floor? The pros and cons of this system we will consider in this article to help you make the right choice. Such equipment has certain disadvantages, among them are the risk of light damage to the film during mechanical impact. Best infrared warm floor, however, choose not too difficult, having considered the proposals of the popular manufacturers. Many consumers refuse such systems, preferring other options of heating for the reason that infrared equipment is quite expensive.

Fire safety

infrared warm floor under the tile

In Addition, in the process of exploitation have to follow strict rules of use, as incorrect use can cause damage to the film, which in some cases leads to a fire.

The Order of mounting operations

infrared warm floor which is better

Choosing infrared warm floor, the pros and cons of this system you have to be considered before shopping the relevant products. Experts suggest to use professional help for the installation work. However, if you have decided to implement the data manipulation, then you have to make some manipulations, among them the training grounds.

The Surface may not change previously, but in this case, you need to check the readiness of the floor for further manipulation. Thus, roughing the surface should be smooth and clean. Let the height difference of not more than three millimeters.

Styling infrared floor heating should be done only after inspection of the grounds. How smooth surface, it is possible to check, using the building level. If necessary, the plane you want to align, but after it should be dried well, cleaned from dust and debris. To do this, professionals use industrial cleaner, however, if you decide to make your own, it is possible to do household device. Only after you begin the installation.

Technology works

If you decide to use for heating your home infrared warm floor, you initially will need to put a waterproofing layer is necessary to protect the entire system from the damaging effects of moisture. In the next stage, laying the insulation. It is not necessary to listen to the experts who do not recommend the use of insulation. Infrared warm floor under the tile should be laid with the use of insulation, this layer will help to avoid heat loss, which can be fastened down. Such preparation will increase the efficiency of the system used many times, reducing energy consumption.

For thermal insulation, you can choose different materials, but the professionals recommend the use of technical tube. This is especially true in cases when the topcoat will be used tile. The material should be stored in such a way that the metallized side was facing up, layers are important to stretch and glue at the joints with tape.

Mappinginstallation

Before you start to lay infrared warm floor, you need to determine the location of the thermostat. The optimal rate is fifteen centimeters, which should derogate from the floor surface. The next step is the installation scheme of the film, in this case one should take into account the time that the system shall not be placed under large furniture and appliances.

installing radiant floor heating

Mounting the first row, move back a distance from the wall, which should be from ten to forty centimeters. If the infrared heated floor is the main heat source, the system should take approximately 70% of the floor space. If you plan to put this system as additional heating, the percentage should lower to 40.

Styling Features and connectivity

Infrared polyester film should be laid on a heater in accordance with the prepared in the previous step scheme. If necessary, the film can be cut according to the planned manufacturer lines. Elements to make drawing copper side of the contacts facing down, toward the wall. In the latter case we are talking about the wall where you intend to place the thermostat.

Terminals must be connected to the edge of the copper strip, and then connect the wires. The connection of the clamps, and parts of sections of film should be compulsory isolated using asphalt mastic for special purposes.

Installing radiant floor heating may be effected after cutting of cloths. Length of the heating elements involves a smaller number of contacts. The master must remember that the maximum possible length of the strip should not exceed a figure equal to eight meters. Some part of the terminals must be located on a thin bearing surface, while the rest will be inside the film.

Initially to the underside of the film to connect the temperature sensor, which had previously been thoroughly isolated. After installation of the material, and the connecting wires and the contacts you need to carry out installation of the thermostat.

You Can install the system using sockets (like a regular appliance). As shown by years of practice, most of the wires that connect the thermostat with the film, it is better to skip under the surface of the floor. In the next step the wizard needs to connect infrared floor to the grid.

Testing Phase

After you have managed to lay infrared warm floor, you need to make its testing, only after it will be possible to lay the finish flooring. You will be able to ensure that the system operates normally, if you do not notice the arcing and overheating at all sites where it was produced the connecting contacts.

It is Important to see and even that film was heated as uniformly as possible. If the test system is successful, then warm the floor must be covered with an additional layer of polyethylene film, only after you can start the installation work, where will be involved in the finish flooring.

Selection of infrared floor for manufacturer

If you decide to purchase a infrared warm floor, you need to understand the producers of goods which represented on the market today. In the store you can find a brand film Heat Plus. These floors was developed by the Korean company, which acts as the exclusive importer in Russia. If you want to choose a modern system that is produced with the latest technology, you should choose this company, since 2012, she has updated equipment, and the production is currently underway on a unique machine.

Infrared warm floors, installation of which is quite really clean, can be produced by Caleo, which today is very common on the Russian market. As a manufacturer act DYS GT3 and Technology Corporation which engaged in the production of infrared systems designed for heating. In 2004 they patented manufacturing technology, which has certificates of the Korean Association of infrared radiation. The method of production is unique, and you can see the high quality of this product.

styling infrared floor heating

You have decided to buy infrared warm floor? The installation of the system we considered above, now let's deal with the choice of the brand.

Another no less famous manufacturer of these products - "Techno Pro". On the market of such infrared heated floors is known under the brand name RexVa. These products are presented for sale in twenty countries around the world, the company is engaged in the execution of individual orders due to the scientific and technical potential and production flexibility. This allowed customers to buy products that are of high quality and affordable cost.

Why you should stay on this version

If you lay infrared warm floor under the tile, it will allow to build a system that will last for a long time. If we are talking about the house with normal insulation, the electricity consumption every day isabout 30 watts per square meter per hour. If you operate an electric floor with the help of the thermostat, it will allow to minimize energy costs. Along with this will be able to provide maximum comfort to all the people who are in the room.

Connection infrared warm floor eliminates the presence in the rooms of the electromagnetic field, which is present in each cable type. Film in the process emits long infrared rays and anions, which are negatively charged ions.

The Heat produced by the infrared heater, will have a positive impact on health, but feel that it can be compared with the sunlight.

Conclusion

If you have decided to choose infrared warm floor, which is better of them to determine, reading the manufacturers description above. It is worth noting that each company uses the best technology and you will have to decide only on cost, which would be most appropriate.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/31880-nfrachyrvony-ceply-padlogu-plyusy-m-nusy-nfrachyrvony-ceply-padlogu-pa.html

DE: https://tostpost.com/de/gem-tlichkeit/31556-infrarot-fu-bodenheizung-vor-und-nachteile-infrarot-warmen-boden-unter.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/31423-el-suelo-infrarrojo-caliente-los-pros-y-los-contras-infrarrojo-c-lido-.html

KK: https://tostpost.com/kk/domashniy-uyut/32205-infra-yzyl-zhyly-zhynysy-arty-shyly-tary-men-kemsh-l-kter-infra-yzyl-z.html

PL: https://tostpost.com/pl/komfort-domu/33266-podczerwieni-ogrzewanie-pod-ogowe-plusy-i-minusy-podczerwieni-ogrzewan.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/33007-infravermelho-quente-g-nero-pr-s-e-contras-infravermelho-ch-o-quente-d.html

TR: https://tostpost.com/tr/domashniy-uyut/28615-k-z-l-tesi-s-tmal-zemin-art-lar-ve-eksileri-vard-r-k-z-l-tesi-s-tmal-z.html

UK: https://tostpost.com/uk/domashn-y-zatishok/32419-nfrachervona-tepla-p-dloga-plyusi-m-nusi-nfrachervona-tepla-p-dloga-p-.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Calceolaria -

Calceolaria - "flowers-shoes". Advice on care and breeding

For the spring holidays at the flower markets often appear plants with beautiful and unusual flowers called calceolaria, or colloquially "Shoe". By purchasing this plant, after flowering, people often throw it out, believing that ...

Finishing materials for the façade of a private house: review and recommendations. The best modern materials for facade

Finishing materials for the façade of a private house: review and recommendations. The best modern materials for facade

the importance of the external appearance of the building is difficult to overestimate. How successfully will be selected finishing materials for the façade of a private house, and how well done the entire work depends on the firs...

The interior and decor of the nursery for two girls

The interior and decor of the nursery for two girls

Pick the right design a child's room is much more difficult than other dwellings. The fact that the child in this space need to spend a lot of time. The task of design is much more complicated, if two children. Of course, all pare...

The most effective mosquito repellent on the market

The most effective mosquito repellent on the market

Mosquitoes inhabit almost all climatic zones except the desert. Especially in damp, marshy places, near lakes and rivers. But being on the top floor of a multistory building, in a country house or sitting around the campfire in th...

Screed mechanized way: a description of the technology, benefits and reviews

Screed mechanized way: a description of the technology, benefits and reviews

If you can create a flat floor, it will be possible to lay any finish. Additional sanding and polishing is not necessary, which saves time and effort. However, traditional technologies do not always allow to achieve the desired re...

Oil for chains saws. What kind of oil to use to lubricate the chain of chainsaws?

Oil for chains saws. What kind of oil to use to lubricate the chain of chainsaws?

Chainsaw – a popular tool for those who have to do many chores independently. You can use them for different purposes – cut firewood, cut dry branches… But that the device lasts as long as possible, you need to ...