Aluminum radiators: types, features and reviews

Date:

2019-05-11 13:20:40

Views:

780

Rating:

1Like 0Dislike

Share:

Table of contents:

Comfortable (especially in the cold season) is impossible without proper and effective heating system. For this purpose, they often use invented in the 50-ies of the last century aluminum radiators. Their relevance at the present stage of construction (both industrial and private) is growing steadily. On the Russian market, these sinks are widely represented both domestic and European or Chinese manufacturers.

Note! In the old centralized heating systems like radiators should be avoided.

Aluminum radiator

Production Technology

Today, aluminum radiators are made in two ways:

  • Cast under high pressure. With this method, molten aluminum alloy is poured into a mold under high pressure. Before full solidification of the metal technology for forming a flow collectors, are removed. The holes in the lower section sealed with a special plug (either by welding or by pressovanie).
  • Extrusion. With this method the upper and lower part of the section (with horizontal channels for circulating the coolant) also are made by casting. The middle part (with vertical channels) are manufactured by extrusion: aluminium, heated to a soft state of the clay, pressed into shape. After final curing, all three parts are interconnected in one of three ways: by welding, pressovanie or with the use of special adhesives.

Prices of radiators, manufactured by extrusion method is lower than cast counterparts. However, the presence of technological joints reduces the strength and reliability of the products, so they are less popular than cast counterparts.

Note! To radiators manufactured by means of extrusion, impose the highest requirements for acid-base indicator (7-8). It turns out that you can only use them with almost neutral coolants.

Varieties

At the place of connection of the pipes for leading the coolant to the body of the radiator, these products are divided into two groups:

  • With side connection. Such products are assembled have 4 holes (with standard 1 inch diameter). Depending on the technological features of the house pipes (inlet and outlet) can be connected either with one hand or with two. 2 unused (with connecting pipes) holes install special plugs or valves to adjust temperature.
  • With bottom connection. Such products are in demand in modern office buildings, shopping centers, medical facilities and individual housing.

Although by design, all of these products are the sectional, the manufacturers put on sale two types of aluminum radiators:

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

  • In the form collected in the production of batteries consisting of 4 to 12 sections.
Radiator, assembled in manufacturing
  • Complete one section. During the installation process, all products are interconnected using metallic couplings and sealing gaskets.
joints and gaskets

Articles relating to the first type, easy to install, and the time it takes a little. In addition, these radiators are usually standard sizes. Therefore, it is easy enough to pick up the finished product for replacement of the obsolete iron or steel batteries. With the help of radiators of the second type can most accurately calculate the heat output required to heat a particular room. Depending on this gain is the number of partitions that you want. These products are widely used by professionals in the design and construction of new buildings of different purposes.

Among the technological features of these radiators it should be noted the geometry of the cross-section vertical channels for passage of coolant. To date, three of them:

  • In a diamond shape (use rarely, because of the low mechanical strength);
  • Elipsoobraznoj;
  • Round (this form provides the greatest mechanical strength).

Scope

Application field of aluminum radiators is limited by the rate of acid-alkaline balance (pH) used in the coolant system. For pure water pH=7. The variation of this ratio in the smaller side means that the liquid becomes acid. The increase in pH (more than 7) indicates that the fluid is of alkaline nature. In contact with air on the surface of aluminum forms a protective oxide film. But, under the influence of chemically aggressive liquids it is destroyed, which significantly reduces the service life.

So the question is which radiator is better aluminum or steel, there is no definite answer. For example, in a private house (equipped with Autonomous heating system, when the owner can use for circulation of liquid with known characteristics) or a modern high rise building (equippedboiler room; and the characteristics of the coolant can contact a service her professional) can safely install a modern aluminum battery. In here in the old house where is used for heating water from the nearby CHP plant (which specifically add the lye to prevent the formation of scale on the internal surfaces of boilers), it is better to use a traditional steel radiators.

The wider the range of pH specified by the manufacturer in the technical documentation, the wider the scope of this cooler and it is less “whimsical” to the liquid used in the heating system.

On the wall in the office

Specifications

The main specifications of aluminium radiators include:

  • Working pressure – 16 to 20 ATM.
  • Test pressure (which is often created in the pipe when checking the system before the heating season) - 24 to 30 ATM.
  • Pressure Limit of the mechanical gap – 48-100 ATM.
  • Heat one section – depending on the size and design features from 150 to 195 watts.
  • The Value range of indicator acid-base balance (pH): extrusion & ndash; 7-8; for a standard cast of 6.5-9; for radiators with a protective coating of interior walls – 5-10.
  • Maximum temperature of the coolant – 110-120 degrees.
  • Capacity of the section – from 0.27 to 0.43 per liter.
  • The distance between the axes of the horizontal collectors – from 150 to 800 mm (most common: 350 and 500 mm).
  • The Width of the section – 76-80 mm.
  • Depth of the section – 70-96 mm.
  • The weight of the section – from 0,78 kg (and the heavier the section, the better heat dissipation and reliability). Unfortunately, some manufacturers at the present time this indicator is not standardized.
  • Inlet Diameter (standard) – 1 inch.

Advantages and disadvantages

The Main advantages of aluminum radiators (compared to cast iron or steel counterparts) are:

  • High heat output, due to the physico-chemical properties of the material used for manufacturing.
  • Small inertia, ensuring a minimal warm-up time and easier automatic maintenance of the set temperature.
  • Significant fuel savings when used in Autonomous heating systems.
  • Small internal volume of the sections, which allows the use of the circulation pump of low power.
  • Small weight that simplifies transportation and subsequent installation, and reduces the load bearing structure of the building (which is especially important when the individual building).
  • Affordable price (on average 30-35% cheaper than the bimetallic analogues).
  • Attractive appearance.
  • The Sectional design allows you to create a heating battery in accordance with the size of the room.

The Main disadvantages of aluminum radiators (unlike the bimetallic competitors) are:

  • They cannot be put in the Central heating system (where it is impossible to control the purity of the coolant). In addition, during the rinsing of pipelines (for example, before the heating season) can be used a variety of chemically active reagents, which can adversely affect the safety and serviceability of the aluminum panels.
  • You must install a special valve for periodic removal of the hydrogen formed by the interaction of aluminium with chemically active fluids.
  • Lesser warranty period – from 5 to 15 years (depending on manufacturer). The exception is Fondital Aleternum whose warranty period is 20 years. While the majority of bimetal products – 30.

Leading manufacturers

More recently, the rating lists aluminum radiators on the Russian market was led by the Italian company Fondital and Global. Now decent competition they are (and often outstrip them in the number of products sold during the year) Radena Italian and Russian Royal Thermo, Me and Konner.

Popular (due to good ratio quality/price) are the products of the German Tenrad. Much less you can find products of Polish manufacturers (Armatura, SMALT) and Hungarian (Nami, Sunny Heater).

To the production of numerous Chinese manufacturers should be treated with great caution. Trying to reduce the price of their products, they often skimp on material. Consequently, it is possible to obtain thin and unreliable heater. Among the rather well-established firms from China may be noted STI, Maxterm, Epico and Rommel.

Types and comparison of aluminium radiators from leading manufacturers

For a correct comparison, we choose the most popular model of the heating of the battery (with a centre distance of 500 mm), consisting of six sections from different manufacturers. Why this product? Due to the fact that the standard height of these radiators is 558-575 mm (it varies depending on the manufacturer) that allows them to be installed under the sill (subject to a sufficient air gap between the top and the bottom of the product). And the total thermal power, enough to heat a small room (e.g. the bedroom area of 9-10 m²).

Radiator 6 sections

Compare the cost. Model with a working pressure of 16-20 ATM and a 10-year warranty Royal Thermo is 2200-2900 Revolution 500 rubles; Charging Alum 500 – 3300-3400 rubles; Radena 500/80 – 3200-3600 rubles; Fondital Calidor B2 500 – 3700-3900 rubles.

On heat transfer. Heat one section: 171, 183, 192 and 191 watts, respectively. The advantage of the products of Fondital and Radena can be attributed to the greater heat transfer. Although some “guru” of heat confidently assert that it is just an advertising marketing manufacturers.

Pressure. Despite the modest claimed the heat transfer and Thermo Royal guarantees the highest mechanical pressure on the gap – 100 ATM (other – 48 to 50 ATM). This is achieved thanks to the round cross-section vertical collectors. Others use oval (elipsoobraznoj) form. The Russian Royal and the Charging originally developed their products to operate in heating systems with working pressure of 20 ATM, "the Italians" (Radena and Fondital) is designed for working pressure 16 ATM.

Summarizing all of the above (in terms of price/quality/reliability) our rating is as follows: first place – Thermo Royal Revolution 500; second place – the Charging Alum 500; third – Radena and Fondital Calidor 500 B2 500.

Among 6-cell "classmates" aluminum radiators from trusted manufacturers it is also worth noting the Russian Konner Lux (2200-2300 rubles), Polish Smalt 8018-500 (2400-2600 roubles), German Tenrad 500 (2700-2800 rubles) and Chinese Rommer Profi 500 (2500-2700 rubles). Heat one section - 175, 178, 142, and 150 W, respectively. All four models are designed for a working pressure of 16 ATM. The maximum guarantee on their products gives Konner – 15 years, minimum Rommer – 5 years.

About the technological features of the model Fondital Aleternum B4 (price for a battery of six sections is 4400-4700 rubles) see below.

Protective coating

Feature aluminium radiators Fondital Aleternum B4 from the famous Italian producer is special anti-corrosion coating of the inner walls of collectors. Patented composition based on synthetic resin allows (according to developers) to exploit such products with acid-base indicator coolant pH within very wide limits: from 5 to 10. Warranty period – up to 20 years (today it is the only radiator made of aluminium with such a great warranty service). In this innovative model plugs bottom holes of the vertical channels are installed by the patented thermoelectric technology (unlike older models that used welding). To increase heat transfer of the rear vertical plate is in the form of sectors, which increases convection and increases the heat transfer. According to developers of high specifications (working pressure-16 bar, burst pressure-60 ATM) allow you to use these devices in high-rise apartment houses with Central heating.

Radiator Fondital Aleternum B4

Model Fondital Aleternum B4 on the market five sizes of spacing between the horizontal collectors: 350, 500, 600, 700 and 800 mm (the capacity of one section is 0.2 to 0.26, 0,31, 0,36 liter and 0.39, respectively).

Note! Mechanical strength, anti-corrosion coatings in the technical documentation of the manufacturer is not specified. Therefore, when installing such products in older homes (where the coolant can be abrasive elements such as pieces of rust or sand) the period may be less.

A Simplified calculation of the required number of partitions

To determine how to choose the right aluminum radiator for a particular room, you should use the simplified procedure of calculation of the required number of sections. Experts (not going into details of the requirements of GOST and SNiP) I believe that to maintain a comfortable temperature (during heating season) in the area with standard glass and a ceiling height of not exceeding 2.6 to 2.8 meters, enough heater with 1 kW of thermal power for every 10 m². For example, the calculation will take the room area 12 m². Then the total capacity of the battery should be 1.2 kW (1vs1,2). Due to the fact that energy efficient Windows are still not installed at all, and normal Windows perfectly insulate, to that value, add 10% (0.12 kW). Get the total capacity of the battery, equal to 1.2 + 0,12 = 1,32 kW.

Let's Say that, after reading numerous reviews aluminum radiators and the advice of experts, you have opted for a model Revolution 500 (c side input of water, a centre distance of 500 mm and a wave-shaped lateral edges) from Royal Thermo. According to the manufacturer, the heat output of one section is 171 watts (0,171 kW). The number of sections determined by dividing the total required power for the heat transfer of one section: 1,32 : 0,171 = 7,7 PCs Naturally rounded off to the nearest whole number in a big way. So, for our room to set 8-section radiator specific model from this manufacturer. For a more accurate calculation it is better to use online calculators that can be easily found on the websites of the leading suppliers of these products.

Radiator 8 sections

In conclusion

Hope the above information will help you to understand how to choosealuminum radiators, and where they are most appropriate to apply. The main thing you should pay attention: the warranty obligations of the manufacturer (as with the lifetime and replacement products). And oddly enough, special attention should be given to this technical measure, as the weight of one section. Without exception, professionals claim that to make a quality and reliable radiator is not very easy. According to numerous user reviews battery highly effective and durable enough (of course, if all the recommendations regarding the quality of the fluid circulating in the heating system).


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/32925-alyum-n-evyya-radyyatary-acyaplennya-v-dy-haraktarystyk-vodguk.html

DE: https://tostpost.com/de/gem-tlichkeit/32594-aluminium-heizk-rper-arten-eigenschaften-und-bewertungen.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/32475-los-radiadores-de-aluminio-calefacci-n-tipos-caracter-sticas-y-los-cli.html

KK: https://tostpost.com/kk/domashniy-uyut/33249-alyuminiy-radiatorlary-t-rler-sipattamalary-zh-ne-p-k-rler.html

PL: https://tostpost.com/pl/komfort-domu/34304-aluminiowe-grzejniki-rodzaje-funkcje-i-opinie.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/34084-radiadores-de-alum-nio-de-aquecimento-tipos-caracter-sticas-e-opini-es.html

TR: https://tostpost.com/tr/domashniy-uyut/29674-al-minyum-radyat-r-t-rleri-zellikleri-ve-yorumlar.html

UK: https://tostpost.com/uk/domashn-y-zatishok/33453-alyum-n-v-rad-atori-opalennya-vidi-harakteristiki-v-dguki.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Vents for metal: overview, types, features and reviews

Vents for metal: overview, types, features and reviews

arrangement of the ventilation through the roof, not to be confused with the regular exhaust of air. Of course, the traditional home ventilation may have access through the roof, but in this case it is the system of ventilation of...

The Foundation of the blocks. Properties and description

The Foundation of the blocks. Properties and description

construction of Foundation of concrete elements is the quickest option. Although solid surface is more appropriate for him, for example, filled with concrete, as is a monolith, but it will have to dry for almost a month, and all c...

What should be paint on concrete for outdoor use

What should be paint on concrete for outdoor use

Concrete pavement should be protected from negative environmental factors, as well as give them the properties of high resistance to contamination. That such requirements should match the paint on the concrete surface for outdoor ...

Glass tables for the kitchen: sliding design for every taste

Glass tables for the kitchen: sliding design for every taste

for quite a long time the furniture made of glass, never goes out of fashion. This applies to many different things. The kitchen of this trend is also not spared, and tables for kitchen, glass (sliding & solid) can now be found in...

Water tank. Classification and application

Water tank. Classification and application

water Tank – the main and most convenient method of preservation, accumulation and delivery of potable and industrial water. It is used in many fields of human activity to which you want to stock up and store liquids. These...

How to beat the scythe: the secrets of mowers

How to beat the scythe: the secrets of mowers

the Old braids are not as common as it once was, but today often there are situations when more reliable tool just yet. Only few people know how to bring an old tool in a working condition.For example, how to discourage the braid?...