Shredder for wood: manufacturer

Date:

2018-03-18 14:56:20

Views:

388

Rating:

1Like 0Dislike

Share:

Table of contents:

If from time to time you are faced with the need of tree pruning, you have to face the challenge of storing thin branches. They can take a lot of space. Some cut them manually or use special cutters. The second option allows you to achieve results much faster, and the timber is converted into fine chips. Assembly factory manufacturing is too expensive, so the creation of similar equipment you can give yourself.

The Production of rotary crusher

shredder for wood

If you choose to run the shredder for wood, then you will need the following materials:

  • High-carbon steel;
  • Steel shaft;
  • Wizard;
  • Steel sheet;
  • Tube;
  • Two bearings.

Choosing a steel blade, you should prefer the thickness equal to 5 mm, and from 10 to 16 mm. the First version of the billet will go into the hopper and the casing. High carbon steel is needed for knives, to use can a car suspension spring.

For welding the frame you should be round or profiled tubes. If you want to make shredder for wood, you will need a 20 mm steel shaft. As the fasteners will be bolts with nuts. Belt drive may not be installed if the crusher will be equipped with a motor number of revolutions of 1,500 per minute.

Manufacturer Schroeder

shredder for wood with their hands

Using a thick metal, you have to cut a circle, whose diameter will be 400 mm. At the center of bore holes, where to insert the shaft. The shaft and pulleys are machined on a lathe, the ends of the shaft thus tapped for installation of pulley and flywheel.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

If you need a shredder for wood and you decide to make it yourself, the knives you can perform at home. If the deal with that you can not, you can do it by the Miller. Of the steel sheet at the next stage, to weld the protective cover that connects to the bunker. The same material is used for the cage.

Holding of Assembly

drawings of shredder for wood

Homemade chopper – a cutting mechanism that is fixed on the frame. The latter can be performed in any design. The drive motor is located in a convenient location, which will depend on the length of the belt. Fixation of the motor must be done moving, to be able to tension the belt.

Making shredder for wood, you need to install the shaft of the mechanism to the frame. To it is fixed the pulley and the flywheel. The knives are bolted to the flywheel so that the angle was 30°. To use this requires the bolts. Additionally prepared steel lining.

Features manufacturer chopper with an array of drink

If you decided to make shredder for wood with your hands, then you can use the matrix based on the saw. Reassembly is much easier the previous one, because welding operations are reduced. To conduct Assembly required saw wood hard alloy. Should prepare a sheet of 2 mm steel, dividing 5 mm washers and pipe for the frame.

Cusp

Having Examined the drawings, shredder for wood, you will be able to understand what design to choose. From the above details it is necessary to assemble the product, which is obtained by the method set washers and saws on the shaft. On the sides of the elements are pressed against the nuts. Washer is sandwiched between the saws to cutting thick parts are not pressed to each other and did not move. Zapressovyvajutsja on the shaft bearings and installed the cage.

In conclusion

When your plot is growing a lot of trees, the chopper can be a good tool in the economy. To purchase the original model is quite expensive, so it can be done with your own hands. It will save you from the cut-off branches, occupying a lot of space. The use of the obtained sawdust and wood chips wide, because they can be applied even to home heating.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/1999-shroder-dlya-dreva-vyrab.html

DE: https://tostpost.com/de/gem-tlichkeit/1996-schredder-f-r-holz-hersteller.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/2001-trituradora-para-madera-fabricaci-n-de.html

KK: https://tostpost.com/kk/domashniy-uyut/1999-shreder-sh-n-a-ash-dayyndau.html

PL: https://tostpost.com/pl/komfort-domu/2002-niszczarka-do-drewna-produkcja.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/1999-triturador-de-madeira-fabricante.html

TR: https://tostpost.com/tr/domashniy-uyut/2005-par-alay-c-ah-ap-retici.html

UK: https://tostpost.com/uk/domashn-y-zatishok/2001-shreder-dlya-dereva-vigotovlennya.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

How to build a sauna with your own hands?

How to build a sauna with your own hands?

Thinking how to build a sauna, you first choose the place of its erection on the site and then determined the preferred design of structures and materials, and then proceed with the preparation of the project. If you want to steam...

Weevils: how to deal with garden pests

Weevils: how to deal with garden pests

a funny Little bug with a long nose-a proboscis, which they call it "elephant" is a headache for growers, and not only them. Just think, this pest affects the same pleasure with raspberries, strawberries, cherries, apples! Gets fr...

"MIM-300" - grinder indispensable in the food industry

Today, a booming industry of the Russian production can rightly recognize the food industry. Not so long ago imposed sanctions against Russia aimed at weakening our economy and limit the quantity of imported foreign products and g...

How to embed the dishwasher 45 cm and 60 cm with their hands

How to embed the dishwasher 45 cm and 60 cm with their hands

to Install the dishwasher yourself. There is nothing complicated. But if you face it for the first time, you'd better prepare well before you bring home a box unit.You need to understand where and how you will do the installation....

Wall clock in the style of Provence - a sample of elegance and beauty!

Wall clock in the style of Provence - a sample of elegance and beauty!

nowadays, manual work is becoming increasingly valuable. To do something with their hands – is not only a way to create a exclusive piece for your home, but also the opportunity to start to earn. Today we will try to make a ...

Screw nails: what are and what are used

Screw nails: what are and what are used

Nails are the easiest, but, oddly enough, the most reliable type of fasteners. They are used by mankind for many thousands of years, and the fact that they have survived to our times, it speaks only of the importance of those smal...