How to watch the ceiling panels of foam interior. Materials for finishing the ceiling

On the market today there are a variety of materials for finishing the ceiling. Some people prefer the traditional decision-staining latex paint, someone Wallpaper glues, someone is building drywall construction. However, one of the increasingly popular options today are panels on the ceiling. Foam is often used in the decoration. Plate made from it, have many advantages. When choosing materials for finishing the ceiling, consumers primarily pay attention to the appearance of the coating. An important criterion is the cost. Ceiling panels, the price of which starts from 30-40 RUB/piece perfectly combines high quality and affordability. Next we shall consider what constitutes coverage. Also in the article, you will learn how to install ceiling panels. Photos of some finished works will also be presented next.

Operational characteristics

The Ceiling panels of foam have a high level of acoustic and thermal insulation. The coating is resistant to various external influences. It looks great, blends in with almost any decor. Thanks to modern technology, the production ceiling foam panels may have a surface simulating wood, stone, etc. It is also important that the mounting surface does not present special difficulties even for those who have little experience in the decoration.

Read More about the benefits

The Advantages of the material can appreciate not only buyers, but also experts dealing with professional installation of the coating. As mentioned, the slabs have high thermal and sound insulation properties. This, in turn, significantly increases the overall comfort in the room. Styrofoam ceiling tiles are not afraid of water. Thus the flooring is used in bathrooms, shower rooms and bathrooms, kitchens and other rooms with high humidity. Due to the small mass of the panels can be mounted on virtually any ceiling. This is especially true for those areas where the overlap is not designed for heavy loads. Additionally, the foam panels are easy to process – they just cut and adapt the settings as needed. The range of options for color, pattern allows you to choose a finish to any interior. Users can choose how smooth the elements that create the effect of a seamless ceiling and plate ornamented in accordance with the style of the room.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Disadvantages coverage

Cons of the material is difficult to call is critical, however, to mention them is necessary. Despite the resistance to ignition, the plates are susceptible to deformation and melting when exposed to high temperatures. In this regard, it is not recommended to use them in close proximity to the bright lights or the furnace pipes. Also the products of some manufacturers is not immune to the influence of direct sunlight. Under ultraviolet light the surface can turn yellow, or the material will become brittle, losing strength.

Features of production

The ceiling panel are Made of foam in the following ways:

• Compression – a seal plate in a special industrial press. Such panels have a thickness of about 7-8 mm.
• Injection-casting the molten raw material in a special mold with further hardening under the influence of high temperatures. The plates have a larger (14 mm) thick.
• Extrusion. This technology, normally used for polystyrene plates. But the market can be met and the roof panel of extruded foam. This coverage can obthayutsya decorative film.

It Should be noted that a quality ceiling foam panels do not ignite and will not support combustion. Usually information about fire safety coating indicated on the packaging.

Dimensions

What are the ceiling panels? The dimensions of the plates, as their form is different. The most popular square elements. Their dimensions are 50 x 50 cm. Less common are the rectangular elements. They usually use in the decoration of ceilings in office buildings.

Preparation

To Mount ceiling panels (photos of the finished surfaces can be viewed in the article) is relatively simple. However, before you begin, you should prepare the ground and make a marking. Of course, you can glue the plate, but keep the coating will not be as good and long as if you do everything by the rules. You first need to remove the old finish: paint, Wallpaper, tile, plaster and more. If there are major defects-cracks, bumps, etc., needed to be addressed. To do this, use putty. Small protrusions and the shell can be left untouched – tile will hide. Before gluing two hours approximately you need to unpack the panel that they took the humidity and temperature of the room. In the future it will allow to avoid deformation of the coating. Priming the ceiling is not necessary in this case, but it is desirable because it will increase the adhesion of the adhesive and of the base.

The Markup

She will ensure the smooth arrangement of the panels even on a large area. Opposite angles need to connect the diagonals. From the mid-points of opposite walls to lay lines that intersect in the center of the ceiling. If the intersection points do not coincide, then the diagonal has to be removed. Thus it is necessary to try to minimally disrupt the planned arrangement of elements. If the chandelier is not installed on the intersection point of the centerlines, center pegging more expedient to shift the mounting location. So the tile layout will visually look more symmetrical. After the layout is ready, you can proceed directly to the gluing.

Installation

Gluing should be started from the center of the ceiling or from the place where the chandelier is attached. The work is carried out in sequence. First apply glue to the overlap and then on the tabs on the back of the tile. Some of the trains need to soak beforehand (usually indicated on the packaging). In this case, the adhesive on some tiles and a large section of the ceiling. Only then can glue the elements. The inner corner of one of the tiles need to be cut. This element will be fastened where installed the chandelier. Tiles attached to the ceiling and gently pressed. After the closing of the Central square, fixing tiles continue along one of the lines to the wall. Securing one row, proceed to parallel. The resulting joints are filled with a white sealant.

In conclusion

As you can see, the work is quite simple. Spend a minimum of time and effort, you can get very attractive ceiling surface. The ceiling panels look great in the interior, refresh the room and give it a finished look. The surface maintenance is quite simple. Periodically it should be cleaned with a damp cloth. Service life of such a ceiling, as stated by the producers, not less than 5-7 years, with proper care and more. Despite its shortcomings, many consumers choose this coverage. The main arguments in this case are the cost and ease of installation.