Installation of sockets and switches with their hands

Our Entire civilization is built on electricity, and his “guides” - sockets and switches - in almost every apartment. Their original location in the apartment arranges not all, so it is useful to know how exactly is mounting sockets with his hands.

In fact, as you soon will see, this job is pretty easy, the main thing-neatness and safety.

The First rule that you need to not just memorize, and memorize by heart – never carry out installation of sockets and switches when connected to wiring! Before starting work, must cut off the apartment electricity!

Select the location in which you will carry out the installation of sockets. Ideally they should be located as close to the appliances that you are going to include in them. If you plan to install an outdoor socket, then no additional work to be done you don't have to, but the installation of internal sockets will require extra tools and effort.

You will need:

• Drill and crown the desired diameter;
• Screwdrivers (flat, Phillips, and testing);
• Knife;
• Pencil;
• Socket and a box for her.

Select a place on the wall, which is supposed to do the installation of sockets in the drywall, attach the mounting box and draw around its outline with a pencil. If you don't have a drill with the appropriate diameter with the crown, then cut out a circle with a knife. To do this will not be difficult, since the drywall is quite soft material.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Pull box in wire and insert it into slotted hole. Then use screws to secure it to the wall. It should fit snugly in her place “play”, otherwise the socket will get loose and subsequently fall out of the wall.

Most of the work is done. Now you only have to connect the wires. Disconnect the electricity. This can be done from the corridor or, if the meter you have there, or directly from the apartment. If the counter is still the old model, just Unscrew the tube, and in the new enough to throw the switch. Before making connections, be sure to check by tester screwdriver a current flow in the network.

With two wires no problems should arise no. You just cleaned with a knife from their isolation and connect to any terminals. But if you want to connect three wires, then you need to be careful because one of them is “earth”. The wires are best cleaned inches trimmed strands to twist the ring and put them directly on the terminals. Such a connection is considered to be more reliable, also because of the greater contact area of the wire will be less warm.

Inserted is already connected socket in a box and a screwdriver to tighten the side legs. They should securely lock it in a box. Adjust the location of the sockets so that she was standing in the wall exactly, secure the front panel, and you can assume the installation is over. Can Now easily be integrated into the flat light and plugging in your desired appliances. As you can see the mounting sockets does not require any special knowledge and skills, and quite capable of any.