The installation of the sink with his hands

Date:

2018-03-20 19:40:17

Views:

447

Rating:

1Like 0Dislike

Share:

Table of contents:

Setting the sink can be done by you yourself. This work was not extremely difficult, but there are still some nuances that you should know. Properly, work will be performed, dependent on aesthetics and convenience and sanitary-hygienic situation in the house or apartment. Before undertaking the installation, you need to understand in the design of plumbing fixtures. One of the important components is the trap, which can have a different design.

What is a siphon to choose

install the sink

The simplest is to siphon with the S-shaped curve, certainly in your home. The outlet hose is in this case rotated 90 ° in the vertical plane. This design of the siphon would be enough to sink, because the drain does not get toilet paper and food scraps from dishes. However, there is one “but”, which is expressed in the complexity of the sewer cleaning. Corrugation may eventually tear, and to clean the cable in such a system would be altogether impossible. Therefore, if the sewer cleaning in the apartment have to do often, it is better to choose a hard trap with a removable lid, as for the kitchen, and there it will be necessary.

Alternative solution

height washbasin

Hard siphons may have knee or to be made in the form of a bottle. Cleaning the bottle is quite simple, we must substitute a bucket and Unscrew the bottom hatch. The pinnacle of siphons is the design with revision. This option is not only hygienic but also functional, but it costs more than others.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Features of the unit basin

installation washbasin in the bathroom

Setting the sink may assume that the suspension device on the shaft brackets. In this case the structure is hung on the wall, an additional use of screws in the dowels. If there is a pedestal, he is not the carrier part. The screws should screw into a wall at 70 mm. Therefore, it is important to buy a fastener whose length is 100 mm or more. Should abandon plastic plugs, replacing them with propylene. Metal quickly covered with rust and PVC will crack from exposure to humidity and temperature. When choosing screws for mounting the washbasin is to be preferred to those whose diameter is the maximum.

It Should be remembered that the suspended shell after Assembly forms a lever with the pressure to be a powerful force. If the diameter of the holes for the screws will be less than 6 mm, they must be drilled or not to take this plumbing device. If you decide to install a pedestal sink, the room should be spacious. It is important to remember some of the downsides of this design, they expressed that, under cabinets and inside it will accumulate dirt, and the toilet table, though it seems quite roomy, actually has a small area. Installation of wash basin with pedestal suggests the need to allocate space for the siphon pipe, which is why such decisions can be considered a tribute to traditions.

Recommendations for installation of a sink

installation of wash basin with Cabinet

To Install the sink in the kitchen much easier, because she will have support in the form of countertops. As an exception serves the sink, which is located under the table top, but such options in the home are rare. From a technological point of view, the installation of kitchen sinks more difficult than installing the sink in the bathroom, after all, have to work inside the kitchen furniture.

Assembly before installation

installation washbasin with pedestal

Prior To installation of the device should perform work on the Assembly, which involves the installation of faucet and drain trap. First, you need to work on the installation of the mixer, the package which usually included studs and nuts, Crescent-shaped washer, rubber washer, and a round gasket, which must be worn on the lower part of the mixer to eliminate the water flow down.

Two of the flexible hose is fixed to the mixer, one is for cold while the other – for hot water. Tighten all manually, and then you can use open-end wrench. When tightening too much effort to make it not worth it, because the sharp edges of thread can ruin the gasket. Two studs should be screwed into the holes from the bottom of the mixer, then pull the seal and insert the mixer in the hole of the sink.

On the other hand on a pin you can wear a Crescent-shaped strip, and after – the washer which fasten the nuts. The next stage of the installation of the washbasin, you can go for installation of the drain siphon. The hole should make the top of the pad and insert a long screw in the center. The suction inlet is installed at the bottom.

With the screw it will be possible to connect the nozzle and the plate. Plastic parts to clamp with too much force is not necessary, because the material can be covered with cracks. The rest of the siphon is going to after installation of washstand. Tightening a plastic nut for that fits over the pipe, then screw the upper part of the bottle.

Recommendations for installing the sink on the brackets

installation washbasinshell

When you are installing the sink in the bathroom, attach equipment to a wall surface when the base is tested for durability and reliability. Otherwise you need to use a monocoque frame. On the wall the layout. Mounting height of sink is generally in the range from 80 to 85 cm, but the setting may change based on the needs of the owner. If you have children, the sink can be omitted, whereas for tall people – to raise higher. As soon as the height of the wash basin was determined, on the wall you can make a mark, having a horizontal line. To use this requires building level and the long rail.

The thickness of the side edges of the Cup are measured, because they would be based on brackets. This distance should retreat from the line down and connect the marks. The bowl of the sink must be inverted so that the brackets have been positioned on the lateral support planes. The distance between the elements is measured, to transfer the mark on the wall. The brackets need to attach to the wall and to combine their longitudinal axis, noting the attachment points.

The installation of the washbasin/sink at the next stage involves the preparation of the holes where clogged tube. Now you can fasten the brackets and install the sink. In the lower part are denoted by the attachment. For them, drill holes and set inside a plastic or nylon bushing. The bowl is bolted to the brackets with the screws, which are complemented by the washers. When performing the mounting holes should do their diameter is somewhat smaller compared to diameter of the dowel-screws or screws.

Installation washbasin with pedestal

height washbasin in the bathroom

The Technology of installation should be selected based on the specific model. Typically, the pedestal performs only a decorative function, while the sink is fixed to the wall. However, there are bowls that are completely rely on the podium, but in everyday life the most commonly used first option. If installation washbasin with pedestal involves fixing sanitary appliance to the wall, before beginning work to establish the design in the planned location and mark the fixing points.

The next stage, prepared the holes where clogged tube. The bowl can be bolted to the wall. The screws should be provided the washers. As soon as all communications will be carried out, under the sink, you can put the ceramic leg. Sometimes the basins have a semi-in this case, the sewer pipe is completely sealed into the wall, and the socket of the outlet drain is from the floor to 0,5 m For installation design in the usual way to the wall to begin to fasten it to the bowl, and after the fix on the semi-studs.

Installation of wash basin with pedestal

Mounting Height of sink in the bathroom was mentioned above. However, if the design has a Cabinet, this setting is pre-determined. The first step was to try the Cabinet to the place where it will be located. The elements of the case must not interfere with the connection of sewer and water mains.

Sink in the next stage, is mounted on a stand, it should give a horizontal position. If the Cabinet has adjustable legs, this difficulty will not arise. Now you can proceed to fixing the sink to the wall. To use for this silicone or anchor screws. The first option is faster, but strength is almost equal to the second. Once the installation of basin is complete, you can connect a communication.

Connection of water supply and sanitation

The installation of the sink with your hands means taking stock of the water supply and sanitation. Use in the latter case:

  • Corrugated hoses;
  • Metal pipes
  • Hard plastic products.

The Rubber seals required, they can be represented by the standard products, special cuffs for the corrugations or spacers for sewer pipes. Water connection is a flexible hose, the ends of which there is a captive nut. The last must be the gasket. The hoses connect to the instrument taps, then the nuts twisted and pressed the key.

Conclusion

However simple the process may seem to work on the installation of the sink, may require some knowledge and skills. If the installation was implemented wrong, it can cause various problems, which will require calling a specialist. At the first stage it is important to understand what the sink in front of you. It can be suspended, invoice, or embedded.

Sales are sinks on a pedestal, which are also called tulips. Console sinks are attached to the wall brackets or other fasteners. As their main drawback is the visibility of plumbing fittings and siphon.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/13887-stano-ka-baseyna-sva-m-rukam.html

DE: https://tostpost.com/de/gem-tlichkeit/13890-die-anlage-umivalnika-mit-ihren-h-nden.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/13899-la-instalaci-n-del-lavamanos-con-sus-manos.html

KK: https://tostpost.com/kk/domashniy-uyut/13890-ornatu-olzhu-ysh-a-z-olymen.html

PL: https://tostpost.com/pl/komfort-domu/13884-monta-umywalki-w-asnymi-r-kami.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/13876-instala-o-de-pia-de-suas-m-os.html

TR: https://tostpost.com/tr/domashniy-uyut/13893-y-kleme-lavabo-elleriyle.html

UK: https://tostpost.com/uk/domashn-y-zatishok/13888-vstanovlennya-umival-nika-svo-mi-rukami.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Produce the load cell with their hands

Produce the load cell with their hands

Weight is measured by weights, distance – line, pressure-gauge, etc. and invented a device that measures force? Such tool, of course, available. It's called a dynamometer. Their hands, by the way, is easy to make a simple, b...

Tomato De Barao: description, cultivation of varieties and yield

Tomato De Barao: description, cultivation of varieties and yield

today there are dozens of different varieties of tomatoes. How among them to choose the most delicious, unpretentious care and long-term stored? In this article we will introduce you to the description and characteristics of tomat...

Selfie stick their hands in the home: how to make

Selfie stick their hands in the home: how to make

In recent years, an extremely popular activity among young people is the creation of self-portraits due to the shooting on a mobile phone. Many creative people manage to capture in this way not only himself, but also a lot of unus...

Insecto-acaricide broad-spectrum drug

Insecto-acaricide broad-spectrum drug "Aktellik": instructions for use

With the beginning of a new season for every summer residents and rural resident needs to ensure that his garden kit, there were definitely drugs to combat a variety of pests and parasites that can cause considerable damage to gar...

Wardrobe is the best solution for storing clothes

Wardrobe is the best solution for storing clothes

wardrobe – a great find for any fashionista that has a lot of beautiful dresses to place which is not so easy. Here every thing is in place and not wrinkled, and if the door of the product is equipped with a large mirror, th...

Of brunera macrophylla - maintenance and care

Of brunera macrophylla - maintenance and care

Bruner macrophylla (Bruner nezabudkina) – this is a groundcover that grows in the Caucasus and South-East Asia. It's a pretty intense flora with blue or bright blue flowers, which is characterized by ruggedness and resistanc...