How to make a birdhouse from a plastic five-liter bottles?

Date:

2018-03-22 00:26:17

Views:

534

Rating:

1Like 0Dislike

Share:

Table of contents:

Ever since ancient times there was a tradition at the end of winter or in the spring to be produced birdhouses for birds to help the birds settle in. Thus it is easier to produce offspring and be based in our area.

What birds live in your area

To Build a birdhouse easy, but the fact that it is not suitable for all birds, but care only about the starlings at least incorrectly. So pay attention to what birds live in your area, and prepare several different types of houses in order that they could live different birds. For example, look at how to make a birdhouse out of a bottle.

how to make a birdhouse from 5 liter bottles

Structurally, the birdhouses are divided into:

  • Tryasoguzki. They are built for Wagtails, as in standard houses of this type are difficult to navigate due to the tenacity of the legs. These birds move mostly by step, but do not fly. The dimensions of the box can be left the same, but positioning it should be in a horizontal position.
  • Nesting. They are provided for pikas. The main difference is that it has two entrances.
  • Birdhouse/synecdoche. Standard, familiar to all from childhood house, which is suitable for all kinds of small birds.

You Can make a house out of unconventional materials. How to make a birdhouse from a bottle of 5 liters, you'll learn below.

Key requirements

Before you begin cooking house, then you'll need to consider all measures for protection of birds. I do not doubt that local and neighborhood cats will try to climb inside and retrieve the bird. For this reason, you must:

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

  1. Not to do in front of a hole a perch (roost), because the cat will be able to catch one leg, and the other to safely get to the nest.
  2. Visor to make it longer so that the cat could not reach it from the roof inside.
  3. If you are nesting migratory birds, when spring comes, you need to check the birdhouse. During the winter, it could accommodate other wildlife species such as bats or even squirrels.

how to make a birdhouse out of a bottle with his own hands

In addition to security measures, you should pay attention to the following things:

  • You Cannot make a bird house from wood of coniferous breeds. The resin that comes out of these boards will make the walls of the house inside sticky, which can make birds flight. It's dangerous.
  • The Material used for the manufacture of the house, the inside should be rough so the planks to plane is not necessary. If the material is initially flat, for example chipboard, make the inside of the notches in order that the birds could easily move, clinging claws.
  • Inside a house for birds make the most natural, not gratuite and paint it. Decorate only the outer part of the wall, inside the feathered equip all of their own, as they need to.

Dimensions and varieties of birdhouses

In order to begin to create the house their own hands, it is necessary to choose dimensions and materials to be used for the manufacture of the birdhouse. Next, we will explain how to build capital construction and easy - how to make a birdhouse out of plastic bottles. Today all the buildings for birds called birdhouses, but there are standards sizes for different types of birds.

how to make a birdhouse from 5 liter bottles

  • Birdhouse – size 40*15*15 cm, hole diameter of 5 cm
  • Synecdoche-is a type of the birdhouse smaller which will be a great refuge for small birds: sparrows, gorywoda, flycatchers – Flycatcher and others. Size 30*12*10, hole diameter 3,5 cm
  • Tradegothic should have a ledge in front of the hole. Size - 15*15*30.
  • Nests – the construction of pikas, it should have a triangle shape with a through output. Size 25*15, yrs – 3*6 cm.

If you do not have any information about what birds live in your area, stop your choice on the birdhouse normal size. How to make a birdhouse from a plastic bottle, you will learn a bit later. However, for the Tits more suitable for the cabin of a small size, which can become a cosy nest for nesting, but the starlings in it will be cramped. Perhaps this information is enough to learn how to make a birdhouse out of the bottle and proceeding to the construction of the birdhouse.

The Hut for birds large

An Ideal material for its production will be an ordinary five-liter bottle. Because of the large size of the container house will be equally good both for small birds and larger birds.

  1. You Must make a hole (or several, depending on the kind of birdhouse) of such a size that a bird free there placed.
  2. Can be placed Inside the pole for the convenience of birds. This is done very simply: with two sides parallel to each other, you need to make holes (using scissors or an awl) and insert them into a perch so that the ends out for the hole.

how to make a birdhouse out of plastic bottles

How to make a birdhouse from a plastic bottle: selectable materials

To create this option, you will need:

  • Drill and drillThe 1.4 and 1.16.
  • A clear plastic bottle.
  • Water resistant acrylic paint (brown, dark and light, black, beige and green).
  • Brush and sponge.
  • Wire.
  • Old CD-ROM.
  • Double sided tape.

The Process

    1. In the container at a distance of 3 cm from the bottom bore a hole round shape.
    2. Just below the drill bore a hole and insert the dowel into it. It will be a perch for the Sparrow.
    3. A Bottle coated in a brown color (2 layers).
    4. Next, take the lid and drill a small hole – 2 pieces, threaded them through the wire and twist the ends. In the end it should be a loop for which the house will be attached to a pole or tree.
    5. With a stencil beige paint draw a window with a brush or sponge.
    6. Cut the disk into pieces and then color them in with light brown, black and green paint.
    7. Decorate a birdhouse. On dried pieces of disc sticking double sided tape, then glue them to the bottle neck. Thus, we have obtained an imitation of the roof.

    how to make a birdhouse out of a bottle

    The Birdhouse is ready!

    The Most democratic option

    Next, you will learn how to make a birdhouse out of the bottle with your hands, you will understand that it is quite simple and fast. The process takes approximately one hour.

    You will need:

    • A plastic Bottle of 5 liters.
    • Jute or flax twine – 1 PC.
    • Scissors.
    • Scotch tape, double-sided.
    • Glue.
    • Bunches of grass.
    • A Piece of woolen cloth.
    • Large buttons (shiny) - 2 pieces
    • Elastic – 30 cm.
    • Cereal groats.
    • The Token.
    • Thread.
    • Big needle.
    • Lace.

    how to make a birdhouse from a plastic bottle

    Milestones

    1. How to make a birdhouse from a five-liter bottle? Take a large plastic bottle with a lid and stick on the bottom strip of tape. Him to glue the beginning of the string and begin winding capacitance.
    2. Each of the following series winding should be tightly pressed to the previous one. The first and last number to fix with glue.
    3. The Next step on the canvas of twine, you need to draw a square, apply glue along the trajectory and cut a hole.
    4. Proceed to the manufacture of roofs, for this fit unnecessary woolen cap or sleeve from an old sweater. To wear a woolen canvas on the upper part of the workpiece. The edges of this cloth need to assemble by using needle and thread, secure with a lid handle.
    5. Sew the wool to the basis of the previously prepared bundles of grass. When all the grass will be sewn to the top and secure with a lace, threaded through the handle of a plastic bottle.
    6. Decoration of the entrance to the birdhouse. For this purpose the sides of the entrance hole you need to stick strips of double-sided tape, and above it a band.
    7. Top and bottom lock buttons.
    8. To attract the birds inside to pour grain mix with minerals and vitamins. It is not recommended to pour the bread crumbs, as over time from humidity, they turn into mush, it is very harmful to birds.
    9. Hang the bird feeder on the roof, out of reach for cats.

    how to make a birdhouse from a five-liter bottle

    Now you know how to make a birdhouse from a 5 litre bottle easily and cost-effectively. Place the birdhouse should be on the East side. Approximately once a year, some time before the arrival of birds, it is necessary to disassemble, to clean, to change the Mat. Then you can re-hang it to meet birds.


    Article in other languages:

    BE: https://tostpost.com/be/hatn-tul-nasc/7275-yak-zrab-c-shpako-nyu-z-plastykavay-butel-k-pyac-l-trovay.html

    DE: https://tostpost.com/de/gem-tlichkeit/7276-wie-man-ein-vogelhaus-aus-kunststoff-flaschen-f-nfliter.html

    ES: https://tostpost.com/es/la-comodidad-del-hogar/7282-como-hacer-una-pajarera-de-botellas-de-pl-stico-pyatilitrovoy.html

    KK: https://tostpost.com/kk/domashniy-uyut/7279-kak-sdelat-skvorechnik-kelgen-b-telkeler-plastikaly-pyatilitrovoy.html

    PL: https://tostpost.com/pl/komfort-domu/7280-jak-zrobi-karmnik-dla-ptak-w-z-butelki-plastikowej-pyatilitrovoy.html

    PT: https://tostpost.com/pt/o-aconchego-do-lar/7276-como-fazer-birdhouse-feitos-de-garrafas-de-pl-stico-pyatilitrovoy.html

    TR: https://tostpost.com/tr/domashniy-uyut/7283-nas-l-bir-birdhouse-bir-i-e-bir-plastik-pyatilitrovoy.html

    UK: https://tostpost.com/uk/domashn-y-zatishok/7281-yak-zrobiti-shpak-vnyu-z-plyashki-plastikovo-p-yatil-trovo.html






    Alin Trodden - author of the article, editor
    "Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

    Comments (0)

    This article has no comment, be the first!

    Add comment

    Related News

    Like tempering metal at home?

    Like tempering metal at home?

    Many people wonder how to temper the metal in the home and in some cases require this process? Hardening of products made from this material is carried out, if necessary, improve its strength. For example, for hardening of cutting...

    Michurinsky garden is a unique nursery of fruit plants

    Michurinsky garden is a unique nursery of fruit plants

    Every person who is seriously engaged in their country piece of land, thought about my own garden. Have a passionate nature immediately raises the question of the purchase of high-quality seedlings at a reasonable price that are w...

    Secrets of gardening: transplanting currants in autumn

    Secrets of gardening: transplanting currants in autumn

    for a long time between gardeners, there is debate about when should the transplant be currant in autumn or spring. Some insist on spring planting, basing their arguments on the fact that the younger Bush will have time to take ro...

    Glue for PVC: technical characteristics and scope of application

    Glue for PVC: technical characteristics and scope of application

    PVC, or polyvinyl chloride-the material used today in many areas of construction and installation. Made of a pipe of our water supply and sewage systems, facade construction, wall and ceiling panels, and much more. Connecting all ...

    Rack ceiling for the bathroom with his hands photo, installation instructions

    Rack ceiling for the bathroom with his hands photo, installation instructions

    Rack ceiling structure to become in recent years more and more popular for many reasons. They look attractive, are versatile, last a long time, and the cost is not very expensive. To undertake the installation, you can additionall...

    How to increase water pressure in centralized water supply systems

    How to increase water pressure in centralized water supply systems

    you can Often meet a problem when the water pressure supplied centrally, insufficient to meet all the needs of the consumer. This applies to both urban and rural water supply systems. This problem may be related to the fact that t...