Cutting the tire tread machine

Date:

2019-04-13 20:00:20

Views:

454

Rating:

1Like 0Dislike

Share:

Table of contents:

When the tread pattern starts to disappear from the surface of the tire, the motorist asks a question about whether there will be enough wheel for the season. There is a miracle way to extend the life of worn-out tires with cut tread tires.

The Device for cutting the tread

Indeed, cutting the tire tread with your hands - a pretty simple procedure. For her, invented a special device - a machine-regroover. They are all licensed. You can choose the machine at suitable price.

Cars are cheaper equipped with a modest set of blades and is not protected from overheating. Only works with tires of passenger cars. They are small and compact. They are not used at the service stations.machine for cutting tire tread

The Devices are expensive and are considered professional. Naturally, they cost twice as much, have a rich set of blades and a powerful transformer. That's something they use on the tire.machine for cutting the tread of the tire with your hands

Machine Made in China, USA, Turkey. The most popular are produced in Germany and France.

Those who are not interested to keep up with the progress, use the angle grinder, a chisel or a soldering iron. In this way deepened the tread on a truck, when alternatives to these devices was not simple.

When the slicing of the tread is invalid?

Tires for passenger cars (except specially marked) is not subject to restoration. And here's why:

  1. Tires for passenger cars do not have an extra layer of rubber. Going into it with a box cutter, it's easy to damage the cord. After that, the wheel will be nepogodin to operation and will not be subject to recovery. The idea of summer tires in winter can lead to an explosion of the wheels and the accident.
  2. Even with the cut protector thesauri-of-life tyre will remain the same soft and elastic, as before. Cracks and red spots on the sides - a clear sign of the end of its life.

What tires restored?

Motorists argue a lot about whether it is necessary to make cutting the tire tread, or rather, is it possible to do it. Here are examples of cases where it is really possible:

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

  1. On the tyre is Regroovable marking or U. These labels mean that the manufacturer made a further rubber layer over the cord, which can deepen the cuts.
  2. Almost all truck tires have a thick layer of rubber, which can also be restored.
  3. Wheel with a normal tread depth, elapsed repair and vulcanization. In this case, the figure just restore the patch. This procedure can be carried out on any wheel.
  4. Winter tires adapted for off-road driving, cutting off part of the picture machine.
  5. Worn On the tread rubber layer, thereby increasing the thickness of the tire to an acceptable level. Already a new layer is carried out cutting. Such restoration will be more expensive, but if the tire is not cracked, quite acceptable.

As a rule, after the restoration of the rubber serves another third period already elapsed.

The Process of slicing

A Machine for cutting the tread of tires with their hands - the tool is very easy to use. Just need a little skill. Take the bus, which you can restore and start:

  1. Study rubber. Make sure it has the necessary marking (Regroovable or U). Then the indicators slicing determine whether it is necessary to carry out the procedure.
  2. If necessary, remove the rubber from the disc and thoroughly clean from dirt, sand and stones. Inspect the product inside that there should not be damage. Otherwise restore the bus will only be able to tire.
  3. Find the most worn part of the picture and measure the tread depth. If tires are unevenly erased, we will strive to measure depth everywhere was the same - not less than 3 mm.
  4. Take the machine for cutting the tread of the tyres and set it on the cutter corresponding to the width of the drawing.cutting tire tread
  5. Start the thread. Flowing movements remove strips approximately 15 cm in length.
  6. The Smell of burnt rubber is a little, accelerated, or reduce the capacity of the device (if the controller it comes with).
  7. Cut pieces out of the surface.
  8. Once the protector is restored, piggable all the grooves and slats (you can use a brush).
  9. Install the tire for both the front and rear axle.cutting the tire tread with your hands

In conclusion

Cutting the tyre tread is very popular. Unfortunately, this method often restored rubber is not suitable for this, endangering all road users. When buying the former in the use of a splint is to examine very carefully.


Article in other languages:

AR: https://tostpost.com/ar/cars/16449-cutting-the-tire-tread-machine.html

BE: https://tostpost.com/be/a-tamab-l/31902-narezka-pratektara-shyn-mashynkay.html

DE: https://tostpost.com/de/autos/31576-schneiden-sie-die-lauffl-che-der-reifen-schreibmaschine.html

ES: https://tostpost.com/es/coches/31441-el-corte-de-la-banda-de-rodadura-de-los-neum-ticos-de-la-mquina.html

HI: https://tostpost.com/hi/cars/18069-cutting-the-tire-tread-machine.html

JA: https://tostpost.com/ja/cars/16141-cutting-the-tire-tread-machine.html

KK: https://tostpost.com/kk/avtomobil-der/32224-kesu-shinalar-protektoryny-mashinkoy.html

PL: https://tostpost.com/pl/samochody/33283-rowki-bie-nika-opon-maszynk.html

PT: https://tostpost.com/pt/carros/33024-o-corte-do-piso-de-um-pneu-de-uma-m-quina.html

TR: https://tostpost.com/tr/arabalar/28635-dilimleme-lastik-makine.html

UK: https://tostpost.com/uk/avtomob-l/32440-nar-zka-protektora-shin-mashinkoyu.html

ZH: https://tostpost.com/zh/cars/7084-cutting-the-tire-tread-machine.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Chinese

Chinese "Japanese" Isuzu Elf

for anybody not a secret that in China, on a par with cars of their own brands, collect many brands of European, American and Japanese automobile industry. Happens all the enterprises with modern equipment, and as the Chinese...

Fuel pump low pressure diesel engine: basic features and purpose

Fuel pump low pressure diesel engine: basic features and purpose

the car Engine is often compared to the human heart. And the resemblance really is. Through the heart one can live and the vehicle through the motor to move. The heart pumps the blood in the body – provides circulation to al...

Replacement of shock absorbers of the car with his hands

Replacement of shock absorbers of the car with his hands

in order for the car was convenient and comfortable to move in, required proper operation of the suspensions. In addition to comfort, this is also necessary for safety on the roads. If suspension system is faulty, it can pull an a...

The car pulls to the left: causes. Adjustment of wheel alignment

The car pulls to the left: causes. Adjustment of wheel alignment

each driver question the quality and proper operation of the vehicle in the first place. When it comes to steering and its efficiency, there is a need to be especially careful and exercise caution. Steering – one of the most...

Brake pads: replace with your own hands

Brake pads: replace with your own hands

in order to be sure of the safety of travel, you should always monitor the condition of the brake system of your car. And one of its main components are the brake pads. Replacement of these parts on all modern vehicles, both domes...

Idle sensor VAZ 2110, 21214, 2107, 2112, 2109, 2115

Idle sensor VAZ 2110, 21214, 2107, 2112, 2109, 2115

the teamwork of the internal combustion engine is possible only when the health of all its constituent parts and mechanisms. This vehicle is equipped with various sensors and subsystems, among which special attention deserves the ...