Karakata with a broken frame. ATV homemade

Today, there are a large number of people experimenting and trying to create their own vehicle that they have at hand. Naturally, this is an incredibly difficult task, which under force far not to everyone, but if you have the relevant skills, you will be able to afford something like that. The only question is, what exactly would you like to construct? Because there are different common vehicles that people often choose in the first place. For example, popular to change the motorcycle into a tricycle. However, in this article we will talk about another mode of transport, namely about karakata with a broken frame. You will learn what it is, and also get some useful tips about how exactly to create it.

What is a karakat?

Many people who hear about karakata with a broken frame for the first time, very surprised – it is difficult to imagine what it is, if you've never seen this form of transport. Actually it's not as scary as it may seem. The fact that karakat – a vehicle that has a solid frame, it has the ability to bend, as it consists of two parts. This is what allows the karakat to overcome a variety of obstacles without any problems – that is why he is called Rover. It can be used for entertainment, as it can overcome any obstacles, and do it very effectively. However, you should definitely pay attention to the fact that this type of transport can be applied for more than of serious problems, as it can overcome the snow and the stones and many other obstacles, which are beyond the power of the car with a solid frame. Of course, such a design you can hardly find in the store, so if you are interested in karakata with a broken frame, then you have to think about how to make them your own.

Recommended

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Basic structure

So, if you think that you will need to karakata with broken frame become available to you, you definitely need to decide what kind will be your design, and what you will be doing. The first thing you will need to do – is a frame, but rather – half frames, as each of them will represent a half of the full frame. By the way, you should pay attention to the fact that the articulated frame is actually called articulated, but it's official name, which is not so easy to pronounce, so people also call it breaking down – for the peculiar property which it possesses. Accordingly, you will need to cook half frames or from scratch, or based on any frame that you have available. But at the same time, pay attention to the fact that in the future you do not have any problems with placement of all required elements, including the wheels. If you're going to make a frame with your hands, then you will need to prepare a drawing, to then to carry them out in accordance with it. It is also recommended to consult with other people who also understand the issues that they pointed out to you on those deficiencies that you might have missed. Remember that to make a vehicle with your own hands is extremely difficult, so you have to try to come out something sensible.

Half frames

If you build a Rover with their hands, it is assumed that you will do what you want, but this is not always the best solution. Sometimes it is useful to use the experience of people who are already doing something similar. For example, you don't want to reinvent the wheel at least in the creation of semiframes. Traditionally, the front frame carries the main functional load – there is a driver seat, steering wheel and engine compartment. Why? In telerama car, you can choose where it will be in the engine, what will the car drive and so on. Here the frame is divided into two parts, and in the end it turns out that the front part will not be able to walk normally, if the entire functional load will be located at the rear. Accordingly, the rear frame is commonly used as a Supplement – it is possible to make load. Thus in this matter than everything is easier – the better, so don't make any incredible shapes, displacements of center of gravity and so on. Homemade karakat with a broken frame – it is primarily a functional device. And only if it will function perfectly by itself, you might want to consider cosmetic and other improvements.

Knuckle

Well, it's time to tell you about one of the most important points that has karakat – Pereloma frame. It is constantly in motion when your vehicle turns from side to side, down below, or rises above, and is also met with obstacles. Accordingly, you need to ensure that your knuckle most securely attached to the half frames and it was durable and functional. To do this, to the end of the half-frames haveto weld the sheets of metal – is to them and will be attached to the fist, so they should be as durable. It does not matter, do you karakat of motorcycle or car, you will have to care for properly on the chain drive wheel, as this is extremely important.

Chain-drive wheel

Of Course, when we are talking about a homemade karakata, you'll have to think about how you will clean the wheels of your vehicle is in motion. The most reliable way – to install on the engine pulley, which has to allow chains and belts to the wheels. With the front no problem but rear will have to try, as you will need to consider breaking the frame – it can become an obstacle. However, we can say that this is the most difficult of possible obstacles.

Transmission

Also do not forget that your vehicle will need a transmission, which, of course, is to bring to the same place and the wheel. Regarding the choice of a specific CAT, it all depends on your taste: you can leave that box that was installed on that vehicle that you use as the basis for the karakat, and you can find something more relevant.

Driver's seat

Well, it's time to understand how will look the place where there will be a driver. You need to choose the most comfortable chair, which will also be securely fastened, as you will travel far from the most comfortable conditions, so it is extremely important that you yourself feel in the chair comfortably and safely. But don't forget that right below the seat should be to install the battery pack. The wheel should remain the same or choose one that is more suitable for extreme off-road driving.

Cabin

Of Course, if you don't want the cabin as such do not need – this refers to everything you can find in the driver's cab, then there are pedals which you should also take from that car that best suits you. Also don't forget to checkout the instrument panel which should include everything you need, for example, the mechanism responsible for switching on and off of headlights, the button signal, switched ground, as well as the rest of the functionality that will be provided to your karakat.