When transporting friable construction materials essential large appliances that dramatically simplifies and accelerates unloading. In the last decade significantly increased the volume of such traffic, primarily due to the growth in construction that the trucks could no longer cope. So today we use special trailers of significant size and load capacity.
Semi-Trailer tipper – independently handling mechanism, which has a tilting platform. It is used in agriculture and construction for transporting bulk goods, having a low density such as earth or gravel, and coal and ore.
Semi-Trailer tipper is two times smaller than a car of the same volume. It transports materials twice, and therefore faster payback.
Reliable chassis – one of the most important conditions of such a technique, because when you move the semi-trailer the maximum load falls on this part.
Companies that manufacture dumper trailers, a lot. Their products are differentiated according to the type of discharge, the geometry of the body, number of axles the characteristics of the lifting mechanism.
Technical characteristics of dump semi-trailers depends on the purpose of the machinery. And in order to choose the right design, you need to first know the density of the cargo. After all, the trailers with the same capacity may have different amount of body. Because the density of sand is greater than the density of coal, which, in turn, greater than the density of expanded clay, to transport sand and gravel equipment is used with the body volume 26-28, coal – 35, and expanded clay – from 50 to 60 cubic meters.
Recommended
How does the rear bushing front arm and how many it serves?
The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...
Oil consumption in the engine. Six reasons
It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...
The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...
And clay transported in the semitrailer with the volume of 26 cubic meters, but the cost of transporting one ton of this material will increase almost twice, and the use of such technology will be unprofitable. The purpose of the semi-trailer depends on the material of the body, its thickness and type of suspension.
To reduce the self-weight in the manufacture of structures of a large volume of used aluminum three millimeters thick. Suspension set pneumatic. Semi-trailers with spring suspension and steel body large thickness are used in applications where structural strength, such as carrying heavy rocks.
In tipper semi-trailers used body two types.
Traditionally considered a semi-circular shape, which is suitable for transportation of bulk cargo. Because when loading the stones hit the side tangentially, and shock loads are reduced, the semicircular body is harder to damage. In addition, such design always stronger than rectangular, so the traditional the body is always stronger and lighter counterpart with straight sides. Its most important advantage – fast unloading with no sticky granular materials in the corners.
The Body of square section is used not only for sand and gravel, but also to transport material in a rectangular shape, for example plates or bricks. However, it should be strengthened with ribs, which adversely affects its own weight.
The Classic way back unloading the most popular because of simplicity of design, smaller than the mass of semi-trailers with a larger body volume.
Side unloading is convenient if there are height restrictions, for example on the premises. Therefore, similar mechanisms are used in agriculture for unloading in the storage. Dumper trailers, a photo of which is presented below, is used for rapid unloading on uneven grounds.
There are also designs that perform two-way or universal (on three sides) unloading.
The Trailers differ in method of precipitation of materials. Forced unloading is performed using a screw auger, which pushes the contents during rotation. When the inclined unloading of used telescopic lifts.
Another difference in the construction of semi-trailers related to control. It can be performed from the outside or from the cabin.
Number of axes in the trailer affects its capacity. Eight-wheel construction with reinforced frame carrying up to 45 tons, three-axis – 35 tons and two-axle – 25 tons of cargo.
This mechanism is a compact type of machinery that is used for transportation and unloading of compost, sawdust and silage in agriculture. It can be used to transport heavy loads, such as roots, loose building materials and even the snow.
The tractor-Trailer tipper with wide tires can be uniaxial, thereby decreasing the coupling weight, and increases the permeability of the wheel Assembly or axle, intended for the carriage of heavier goods. Brake design allow you to hold the trailer in place when Parking onslopes.
The Dump body can unload on three sides of the low areas. It accommodates for weights fifteen tons about twenty-three or thirty-eight (with pressing) cubic meters of construction materials.
Comfortable and functional design allows, if necessary, to unload even without lifting the body. Autonomous hydraulic system will work, if you can not handle the hydraulic system of the tractor, and the lack of telescopic cylinders allows to refuse from the engine oil.
The Demand for dump equipment in the domestic construction market has forced the company of the Russian car industry to start production of such structures.
Standard three-axis mechanism produces a subsidiary of the largest Russian truck manufacturer KAMAZ. JSC «NefAZ” produces dump trailer with folding tailgate and lift the front axle with a capacity of 30 cubic meters and carrying capacity of 33 tons.
Not so long ago began to produce such products and Chelyabinsk plant of automotive technology. Its units adapted to the Russian road surfaces and off-road. A traditional form of bodywork is complemented by modern solutions for increase of carrying capacity three-axle semi-trailer.
Machine factory “TONAR” from the suburbs – one of the most famous manufacturers of large construction equipment. Tipper semi-trailer "TONER" most often found in the composition of trains. The range includes designs with volume 28, and 32 cubic meter, four-axle – from 37 to 44 cubic meters. At the factory developed a line of semi-trailers dropside, which is more secure because of the greater resistance. It is convenient for small heights of the room and can significantly reduce the operation time.
The closest foreign manufacturer of construction equipment is Belarus. Tipper semi-trailer "MAZ" on the road and a construction site to learn easy. This is a great all-metal body yellow-orange color without an awning with rear unloading, two-axle design with the capacity of 16 and 26 tonnes, and three axles – 35 tons.
Can Not be confused with the other Polish and trailers «WELTON”. Dumper trailers with a camel on Board, a folding tent on a three-axle chassis and rear unloading are made of aluminum or steel. They have the traditional body shape polutrusy or with straight sides volume from 27 to 49 cubic meters.
“WELTON” – one of the ten leading companies in Europe for the production of trailers and semi-trailers, which produces more than sixty product types, and introduces many unique technical solutions.
Today, the most common combination consists of a truck tractor with three pairs of wheels and semi-trailer which has three or four axis. The capacity of such a mechanism comes to forty tons.
Transport companies prefer trains, as they have higher capacity and more economical. Axial load they have less for the same load that a conventional truck. Such machines can easily be operated within the limit of axial loads on any roads.
For transport companies use trucks convenient because any of them can be set design of a different type. That is, the combination of «tractor plus semi-trailer tipper» more versatile than a truck-truck. The more that buy this unit in the presence of a fleet of trucks can be much cheaper than a truck.
Semi-Trailer tipper – the machinery that today, the most popular in construction, mining industry and agriculture for transportation of loose goods. Leading European and domestic producers in the conditions of competition are constantly improving the products and developing new brands.
Article in other languages:
AR: https://tostpost.com/ar/cars/20674-semi-trailer-tipper-types-and-specifications.html
HI: https://tostpost.com/hi/cars/22271-semi-trailer-tipper-types-and-specifications.html
JA: https://tostpost.com/ja/cars/20719-tipper.html
PL: https://tostpost.com/pl/samochody/39821-naczepa-samosval-nyy-rodzaje-i-dane-techniczne.html
ZH: https://tostpost.com/zh/cars/46858-semi-trailer-tipper-types-and-specifications.html
Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."
Related News
"IZH 350 Planeta Sport" – frisky Soviet bike
it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...
The Honda motorcycles Enduro: features, description and reviews
Selection of clothing for motorcyclists is an issue in the first place. Each protection element serves to prevent injury and enhance ride comfort. In addition, the clothing must meet the requirements of aesthetics, after all, a mo...
Side case for motorcycle: how to make
Motorcycle – a beautiful vehicle. Identifies two-wheeled freedom in all its manifestations. The wind in your hair, unlimited possibilities, great speed, openness – it is impossible not to fall in love with the bike. An...
"Subaru XV" the owners of the car
the Large, powerful, brutal – that's what three words can describe this car as a “Subaru XV”. Reviews of people who own this machine, also often contain these definitions. And no wonder, because they are so right...
Suzuki Skywave 400: specifications, reviews, photos
Japanese maximeter Suzuki Skywave 400 (photo of his posted on the page) is the modern means of transportation in the metropolis. Machine inferior in agility nimble bikes with engines 125 CC/cm, but the level of comfort of the scoo...
Brake pad replacement "Kalina" on the rear and front wheels
Someone long ago said that there is nothing eternal under the sun. Yes, it is, and these words are very relevant for car owners. So, often some parts and components require repair. For those who have not yet encountered such a pro...
Comments (0)
This article has no comment, be the first!