In 2003 at the motor show in new York, the American company Chrysler presented to the public the new model full-size sedan, which became known as the 300C. However, when he was only a concept. But the model was appreciated by all, without exception, and because it came out in the series.
Before I talk about the Chrysler limo, it is worth noting the sedan. Since this model was released first. Its length is 5024 mm, the width is 1882 mm. In the height model is 1483 mm. particularly noteworthy is the wheelbase, which is equal to 3048 mm.
This car is recognizable by his expressive, charismatic design. Especially looker limousine Chrysler 300C. Photo courtesy of below and it shows that this car is really spectacular. Flawless design: the flowing lines of the body are organically combined with a sporty shape of the headlights, chrome-plated parts and alloy wheels. And of course, a special highlight of the appearance gives a powerful grille with a refined brand emblem, successfully the final image.
Specifications even the first models were impressive. The “weak” was to have a sedan with the 2.7-liter V6. The maximum speed of these models has reached 209 km/h and “hundreds” they accelerated for 11.1 s. there were options like “automatic” and “mechanics”. The flow rate was 8.2 liters of fuel on the highway and around 15.2 – in the city.
The Next option, which could boast both a sedan and limousine the Chrysler, was a 3-liter 218-horsepower engine accelerates the car up to a maximum of 230 km/h And the mark of 100 km/h the speedometer reached after 7.6 seconds after launch. The flow was good – 6.6 liters on the highway. And city – 10.8 l. But these models began to produce in 2006.
Recommended
How does the rear bushing front arm and how many it serves?
The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...
Oil consumption in the engine. Six reasons
It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...
The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...
Even today, you can find the Chrysler limousine with a 3.5-liter 253-horsepower engine under the hood. To 100 km/h such car accelerates in 9.2 seconds, but its maximum of 219 km/h. Consumption is the same as that of the model with the engine 2.7 L.
Also in the lineup can be found a sedan and a limousine Chrysler with a 5.7-liter 340-horsepower engine, thanks to which the car can accelerate to 250 km/h And to “hundreds” in just 6.3 seconds. It is important to know that there are two versions of these motors. One was mounted on a model from 2004, and the second – 2005. The second is more economical, as it consumes 19.5 liters of fuel per 100 “urban” miles, and 13.9 L.
But the most powerful engine – 6.1-liter 425-horsepower. Speed 100 km/h this car can dial in just 5 seconds. Max, however, is 250 km/h (is limiting). And consumes the power unit is of the order of 16.8 liters. By the way, all engines were offered as “automatic” and “mechanics”.
Now is to tell you more about the Chrysler 300C limo. Specifications are the same as that of the aforementioned sedan. But the appearance is different.
This model, like most other modern limousines, refers to the type of Stretch. She made not a factory method, and the specialized companies. Professionals ready to take the car and use the technology to extend it. Usually it is produced by tapping into the body the additional section. It is placed between the rear and front doors – you can even see on the above pictures. And then, after this procedure, the experts modified the interior.
Thanks to the preservation of the technical characteristics, the extended version of the model remains as powerful and agile as the sedan. And this is confirmed by the left about limousine Chrysler 300C reviews. People, who took to rent the car, mark with attention to its dynamics, road holding, good handling and, of course, a high level of comfort.
A configuration of these limos are really impressive. The level of luxury can vary depending on what demands the customer of the company, which on the basis of the 300C did for him extended version. Some of the machines reaches 11 meters. Such models can accommodate up to 14 people! And inside for their comfort features all the way down to the last detail: there is a disco ceiling and the same floor, laser installation, two large-screen plasma TV, bar with glasses for drinks, stereo system, leather sofas and more.
Finally it is worth saying a few words about the Chrysler 300C, existing in the form of... a hearse. The so-called vehicle, which transported the coffin, and friends and relatives of the deceased to the cemetery and mourning in other places.
Many translation agencies that provide funeral services, offer to rent the VIP hearse, built on the Chrysler 300C. It is air-conditioned and a refrigeration unit. It is believed that by ordering this luxury hearse, the relatives of the deceased emphasize how much he mattered to them.
Why the 300C? Because he has a comfortable design, and its easily converted into a hearse (given that was produced and the version in the station wagon). This model Chrysler is quite compact, practical and maneuverable, so that it will pass easily innarrow spaces.
As you can see, 300C – it's truly unique in every sense of the word, car. By the way, it is quite possible to buy. The average cost of a car in good condition can range from 400 to 700 thousand rubles.
Article in other languages:
AR: https://tostpost.com/ar/cars/20608-300c.html
HI: https://tostpost.com/hi/cars/22269-300c.html
Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."
Related News
"IZH 350 Planeta Sport" – frisky Soviet bike
it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...
LSD differential - what is it?
Every driver strives to find out about your car as much useful and important information. Of course, if you don't know what a differential is, then you will still be able to drive. But it will end – for more you will not be ...
The rear hub bearing for VAZ-2108: dimensions
Wheel bearing provides a uniform rotation of the wheel around its own axis. Of all the chassis components of the car, he first meets and distributes the shock load, so the main requirements of this part – strength and durabi...
Ignition cable high voltage: the appointment, operation
In modern car there are no trifles. Any item, however small, always has its own, special significance. Sophisticated in their construction details and components even more important. One example – ignition wire high voltage....
Where is the oxygen sensor? How to test the oxygen sensor?
Often the device fails. Let's look at where in the car the oxygen sensor, how to test its performance. Also learn the symptoms and everything about this sensor.a Little historyThis element can be considered the most popular among ...
Tractor HTZ-150: specifications and description
Universal tractor HTZ-150 is made in Kharkov. Its main purpose – agricultural, utility and construction sector. The unit has large wheels with a larger tread, which significantly enhances its performance on the cross. Extend...
Comments (0)
This article has no comment, be the first!