How is the polishing scratches on the body?

Any self-respecting car owner tries to constantly maintain your car clean. However, over time, the coating loses its properties. A variety of road dust eats into the varnish layer, microcracks. This significantly spoils the appearance of the car. Don't heavily decorate the car and scratches it is produced by sloppy Parking. But how to restore the previous appearance of the paintwork? Help polishing scratches on the body. What is it and how to do it with their hands – consider in today's article.

Types

There are several types of polishing:

• Protective. Designed to protect the paint. Gives Shine to the car. Is formed on the surface of the additional film layer. It protects the body from external factors – water, dust and ultraviolet radiation. The composition of these polishes has a water-repellent component. This kind of treatment the body is able to remove fine scratches (so-called “web”) and protect the paint from fading. It is now on the paintwork, there is an intermediate layer – he accepts the blow. Among the disadvantages of this method of polishing it is worth noting the fragility (washed off within three months). Save this polishing body from minor scratches, but no more.
• Abrasive Polish. Intended to repair deeper damage. It restores the cover by aligning the paint. In other words, this wax removes part of the protective varnish. Its thickness becomes smaller, but this removes many chips and scratches without painting. But it is worth remembering that each car has its own residual layer of LCP. Such polishing can be performed not more than three times. Further, the abrasive removes the already ground – will be formed bald spots. After remediation the body requires protective polishing. Therefore, this method is much more expensive and complicated. But the effect exceeds all expectations.

Tools

Is it Possible to produce polishing of the car body from scratches with his hands? Experts say that in the presence of angular grinding machine and a set of felt tips can efficiently recover the paint. However, manually RUB the abrasive is not recommended – the efforts of the hands will vary due to what layer comes off unevenly.

Preparation

Originally, this car need to prepare for polishing. This requires to wash the entire body. It is desirable to use a high pressure cleaner. And cleaned entire body, even if the polishing scratches will be produced locally. Next is to degrease the surface. A suitable solvent ‘Antisilicone”. Please note! If the damaged area was previously painted not at the factory, you should use less aggressive solvents (otherwise the paint may leak). You can use gasoline or medical alcohol.

If this is the lower part of the body, should avoid tar spots. Them clean is very difficult, even antisilicone. Therefore, use a special solvent. It is called – cleaner of bitumen stains. You need to spray the composition on the surface and after a while wipe it with a dry cloth.

Polishes

So, the surface is thoroughly cleaned and degreased. Now start polishing scratches on the car body. To do this, take in hand, angle grinder and set it on a felt circle.

Please note! If the felt circle is not new and has darkening, it should be replaced. Otherwise, the dirt that had accumulated on the felt circle will work as abrasive – not uniformly remove a layer of the paintwork and scratching it. If the item is dropped at least once on the asphalt, re-use, he is not subject. Even after a thorough cleaning it will remain small dust particles. Further apply abrasive paste on the circle. Then, not including the machine, in contact with the paint surface, leaving on it a portion of pasta. And then turn on the sander, and evenly RUB the composition over the surface. You need to create the most seamless transition. This included are pasta with different degree of abrasiveness. When applying the composition to exclude the sun's rays. Polishing scratches on the back of your hands should be in the shade or indoors, but with qualitatively customized artificial light. Repeat the procedure over and over again, periodically checking the status of the circle. The felt is dark as use. If there is serious dirt it must be replaced. Washing is not necessary – it's a disposable, consumable item. And washing the desired effect will not give.

The completion of the polishing

At the final stage I need to re-treat the surface Polish. However, not abrasive, and wax. In its composition it will close a major “pores” (chips and cracks), which are not removed abrasive Polish. It is Worth noting that the repair paste is able to remove only those scratches which have not penetrated to the base of the enamel. Apply the wax Polish should be on the new felt circle or manually. It is important to prepare a clean and dry rag. Pasta is not so granular, so allowed a run in the effort to apply.

Conclusion

So we figured out how the polished scratches on the body. To restore the former Shine of the car and to save it from chipping you can own. But for good effect you should use with a grinding machine. Why not fit a felt attachment on the grinder or drill? The fact that these tools have a different momentum. In the course of the work it's easy to overheat the paint. This is not the best way affect its condition. So we only use specialized machine and only at the minimum rpm.