Polish for car - application features, types, manufacturers and reviews

Date:

2020-02-04 05:00:11

Views:

507

Rating:

1Like 0Dislike

Share:

Table of contents:

After priming and painting on the car body, a layer of transparent nail Polish. It allows you to protect the enamel from external negative factors. Also varnish adds gloss to the coating. But over time, appearance good. Paintwork becomes dull and ugly. nail carTo Resume the previous look will allow repainting of the item. But many do not pay attention to the choice of nail Polish for the car, but in vain. It was from him will depend the final result of works. Well, let's look at what is Polish for cars and how it is applied.

Characteristics

What is this material? Car paint is a clean transparent resin with special additives. The material has good brightness and luster. Coating protected with lacquer, resistant withstands exposure to sunlight, road chemicals and a host of other negative impacts. Paint well polished and supple. Some motorists use technology abrasive polishing. The operation involves removing the layer of varnish with a sander attachment. Thus resumes the factory look of the paintwork and eliminated scratches and cobwebs. On the surface without lacquer to produce these works impossible – the tool is easy to make “a bald spot”.

Types

There are several types of paint for painting the car:

  • Pulp. The oldest type. This material had many disadvantages. Varnish after painting the car quickly dried up and burnt out. This coating was in need of regular polishing.
  • Glyptal. Replaced the cellulosic material. Unlike the previous, this nail paint car has a durable coating and has better covering properties. Glyptal dries much faster because the composition includes a curing agent.
  • Acrylic. This is a more modern type of lacquer for the car. Garage is used by many painters. The total time of drying – about two hours. The material is very durable and does not become cloudy for a long time. One of the varieties of acrylic lacquer - metallic. It consists of bronze or aluminum sequins.Polish for car aerosol
  • Polyurethane. Reviews note several advantages of such a product. The varnish creates a stable and tough coating, has good gloss and easy to apply. Among the disadvantages of polyurethane composition of a high sensitivity to low temperatures. To cause such material should be at a temperature at least twenty degrees Celsius.

What type to choose? Experts recommend to buy the acrylic or polyurethane varnish for the car. Aerosol suitable for those who make painting their hands. the varnish after painting the carUsually in these cans produce polyurethane materials. But for the professional result you must have a spray gun. So the material will be evenly distributed to cover the surface of the body. By the way, polyurethane varnish dries in about 15 minutes.

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Ceramic paint for cars

About this product should be treated separately. This type of varnish has a high resistance to scratches. The material has a particular chemical compound – in case of damages, defects can be delayed independently. But this is only possible after heating of the varnish up to certain temperatures. The material is stretchy and is used as a protective coating against gravel and small stones. Polish for car priceIt may be the wheel arches, the lower part of the bumpers and hood hem. However, among the disadvantages of the reviews point to the impossibility of applying ceramic varnish for local repair. In the case of the hood, will have to cover the entire element. Also the coating is badly polished normal pastes. And not all painters want to work with this material. The cost of this material – about 12 thousand rubles per four kilograms. This is much higher than conventional acrylic and urethane counterparts.

Below follows an overview of the most popular varnishes.

“Lite Express»

This manufacturer makes colorless varnishes based on acrylic. According to reviews, the product “Lite Express” is very durable and gives the coating a shiny appearance. Varnish is not afraid of ultraviolet rays. Can be used on metal body parts and plastic its parts (bumpers, mirrors, and so on). Among the features of the application need to note the need for polishing after drying (which lasts up to two hours). The set includes varnish and hardener (20% of total material). According to reviews, one-liter cans is enough for eight square meters coverage.

“Getpro new Formula”

The Product is also made on the acrylic basis. Hardens quickly and is resistant to chemicals. Not crack over time. It is recommended to apply it to the base or old paintwork (but subject to the quality of its training). Reviews say the product has a low cost. This Polish for car price is 1200 rubles. The kit includes the paint and hardener. The total volume of the composition – a half liter. The manufacturer recommends to abrasive polishing with water after applying the Polish on the surface. varnish car The Grinding is made by felt disk or abrasive grit Р500 or less.

“MS Medium Solids”

The Product is sold in sets 1+0.5 liter (varnish and hardener, respectively). Is applied to the base coat using spray gun. Of the disadvantages – the long drying time. Among the advantages of – glossy finish, and low cost (in thousands of rubles).

“Jet superior”

As part of a lot of nonvolatile particles. Like the previous option, this material is applied with a spray gun. It is recommended to cover the two layers of enamel for a high-quality Shine. The product is used like new paint (including metallic), and the old one after training.

“find the 7700”

The Manufacturer claims that this product is perfect for your local body repair. The composition is made on a urethane-based, so it dries quickly (within an hour). However, the bounding application temperature – 18 degrees Celsius. The kit includes a hardener.

How to apply to the surface?

Consider the features of the agents. Pre-coating need to prepare. The surface must be dry if lacquer is applied to a new enamel. If the old coating, the layer must be cleaned and degreased. The smallest dust particles are excluded. Why is it so important? After the enamel coating varnish on the surface will be visible shagreen. It essentially spoils the look of the car. Therefore, to achieve a professional result, you need to clean microfiber all available dust. By the way, the room should be private, with good lighting. nail paint of the carThe next step is varnishing of the car. First apply a thin developer layer. Should be kept a certain distance – not less than forty centimeters from the surface.

Please note: if you completely mix the varnish with the hardener, it will be very soft. In this case, there is a risk of streaks. Therefore, the first layer should be “dry”.

The technology application is not much different from the work on the painting. Should not to stay too long in the same place. Otherwise, the layer will be uneven (in addition, streaks are formed or will be strong transition). Varnish is applied in two or three layers. nail Polish for painting the carImportant: the air temperature in the room should be at least 20 degrees Celsius. It's usually necessary to use not only polyurethane, but also for acrylic paints. Otherwise the drying time will increase significantly.

The final phase is dried. It can produce naturally or with the help of infrared heaters. If you use the latter, it is important not to overheat the surface. Otherwise, the new enamel can crack.

In conclusion

So we found out what happens to car paint and how you apply it. With the help of this tool, you can regain on any car. Nail polishes the surface and makes the old paint on the newer view.


Article in other languages:

AR: https://tostpost.com/ar/cars/20958-polish-for-car---application-features-types-manufacturers-and-reviews.html

BE: https://tostpost.com/be/a-tamab-l/38517-lak-dlya-a-tamab-lya---asabl-vasc-prymyanennya-v-dy-vytvorcy-vodguk.html

DE: https://tostpost.com/de/autos/38107-lack-f-r-auto---funktionen-der-anwendung-arten-hersteller-und-bewertun.html

ES: https://tostpost.com/es/coches/37884-el-barniz-para-los-coches---caracter-sticas-de-la-aplicaci-n-los-tipos.html

HI: https://tostpost.com/hi/cars/22578-polish-for-car---application-features-types-manufacturers-and-reviews.html

JA: https://tostpost.com/ja/cars/20565-polish-for-car---application-features-types-manufacturers-and-reviews.html

KK: https://tostpost.com/kk/avtomobil-der/38926-lak-avtomobil-derd-oldanu-erekshel-kter-t-rler-nd-rush-ler-men-p-k-rle.html

PL: https://tostpost.com/pl/samochody/40536-lakier-do-samochod-w---cechy-rodzaje-producenci-i-opinie.html

PT: https://tostpost.com/pt/carros/40200-verniz-para-carros---aplica-o-de-recursos-tipos-fabricantes-e-coment-r.html

TR: https://tostpost.com/tr/arabalar/35394-t-rnak-kiralama---uygulama-zellikleri-t-rleri-reticileri-ve-yorumlar.html

UK: https://tostpost.com/uk/avtomob-l/39336-lak-dlya-avtomob-l-v---osoblivost-zastosuvannya-vidi-virobniki-ta-v-dg.html

ZH: https://tostpost.com/zh/cars/19703-polish-for-car---application-features-types-manufacturers-and-reviews.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

Autofocus smolninskiy: services

Autofocus smolninskiy: services

buying a car is a pretty serious issue that requires considerable training. It is very important to study information about car dealerships and their reputation, selection of the most suitable option of car, as well as a financial...

Mitsubishi Delica D5 (

Mitsubishi Delica D5 ("Delica D5"): description, specifications, reviews

Many people want to buy the most versatile vehicle. Such that had a large trunk and interior, was economical in terms of fuel consumption and cope with the Russian potholes. Under these requirements the ideal minivan. But most of ...

Roller-timing belt tensioner: design features and types

Roller-timing belt tensioner: design features and types

In most modern cars you can find roller timing belt tensioner. It is necessary to ensure the normal operation of the internal combustion engine. Design at the movies can be various, everything depends on the adjustment type &ndash...

The air suspension on

The air suspension on "Sobol": the description, photo, technical characteristics

“Sable” is a pretty common car in Russia. In fact, this “younger brother" of the GAZelle. Manufactured this machine since the late 90-ies. Suspension "Sable" similar to Kiselevskoj. Front can stand...

APR, chip tuning engine: responses of motorists

APR, chip tuning engine: responses of motorists

Become the owner of a new car – it means to change your life for the better. But even a long-awaited purchase may be disappointed to not bring the most positive emotions. usually, the reason for the discontent of car owners ...