Decorating flower pot with his hands

In every house plants not only positively affect the condition of the air in the room, but also decorate it. However, if placed in ordinary plastic or clay pot, then look the living area would be too trite and simple. To buy in the store ready-made pots is sometimes too costly, and not always possible to match the capacity required color or pattern.

Preface

To Find a way out of a difficult situation will help our article which describes in detail how the decorated flower pot with different materials. They are quite affordable for every owner and for sure, if you search well, the necessary elements will be in the house. As for the dressing used the most common items. This and scraps of fabric or burlap, lace remnants, small stones or fancy shapes of seashells, which can bring back from a trip on the coast.

To decorating the flower pot look original, the wizard uses and twigs, and pieces of broken ceramic tiles or old dishes, the course is even eggshell. If you read the article, any crafts you can make easily. To attach decorative elements basically use a thick PVA glue. Might come in handy for decorating the flower pot acrylic paint and varnish.

Drawing with paint on the pot

Many Housewives want to see in a flower pot out a picture. This may be a recurring pattern - geometric or vegetable. If the wizard is able to draw well, it will look beautiful pot decorated with flowers or scene pictures.

Recommended

The rating icons in silver. Assessment of ancient icons photo

The Old Orthodox icons are of great interest to collectors worldwide. It is not only the object of aesthetic and spiritual enjoyment. Old icons are a win-win investment. As a special kind of antique, these are highly appreciated in the market, and th...

Crochet swimwear crochet

So you want to be different! So you want to be irresistible! So you want to see on the figure admiring glances and hear behind rapturous sighs.  Although rare, a woman openly admits it. and don't! You just need to tie swimsuit crochet, so&hellip...

Conclusion

Artistic gymnasts, for whom sport – this is life, the lion's share of time to devote to training and participation in competitions. During this period, they manage to demolish more than a dozen gymnastics leotards. So mom young athletes are con...

In the nursery you can make a decorated flower pot, using images of characters from popular movies or cartoons. The child will be very happy having in my room spongebob.

First surface of the pot is covered with acrylic yellow paint completely. This will be the background for the future image. Then simple pencil contours of the facial features of the hero. Using different colors, you can quickly transfer them onto a yellow background. If you can't draw, it will not be on the path to implementing creative ideas, as any hero can be found on the Internet. If you're not handy with a pencil, that too is an option. You can find regular coloring with the desired character. Having printed to the printer the picture you want, it is just transferred to the pot. You can use the blueprint or pressed into the paint with a sharp pencil.

Then painted the details. After complete drying of the product, you can start to transplant the flower.

Stamping pattern on the plastic pot

Decorating plastic flower pots, you can do the same with acrylic paints, but the better the surface is not completely coated, as the pot has a fragile structure and may be pressure deformed, and the paint will crack and eventually fall. If you want to place the drawing on this pot, then choose the colored plastic so you don't have to do the background a solid color. The pattern may be small. For this often use templates, or cut from plastic or cardboard.

You will Also need acrylic paint and a sponge. In order not to get dirty, preferably a sponge adapt to some kind of stick. The template is applied to the Central part of the pot. The sponge dipped in the paint color you want, lightly press down on the edge of the banks, to release excess paint. Then primativism movements of the template pattern is transferred to a flower pot.

You Can perform this decorating flower pots with your hands on the center of the product, and you can put a pattern on the circle below or above the crafts. Then the pattern is cut long that when bent, it covered the entire surface of the pot.

Wrapping cloth

The idea of decorating flower pots can be different. As materials for crafts. If you have after sewing was a piece of bright fabric with a floral pattern, you can make the design of the pot as pictured below.

First, measure the perimeter of the pot at the widest part and the narrowest at the bottom. Then you need fabric to draw a pattern in the shape of a trapezoid. Top line is size wide measurements plus 1 cm on each side on zahlest tissue. The bottom strip has also appropriate bottom part length. Also leave a few centimeters, as glued pieces of fabric overlapping, it was not visible to the pot. Additionally you need to add a few inches at the top and bottom, as the fabric once attached, you will need to bend inward, to be seen of the vessel itself.

The Pot thoroughly greased with white glue, which is applied to the workpiece. Crushing hand across the surface of the fabric is well spread with material, to avoid creases on fabric.

The Remaining pieces of fabric from the top and bottom should be trimmed into thin strips, then adhered to the round bottom and top of the pot will not be folds. Sealed the bottom off completely, the hole is for excess fluid to be retained.

Decorating flower pot with a clothends with the application of matter on top of the layer of PVA or acrylic varnish. After drying, the surface can be practiced by transplanting the plants in a beautiful pot.

Rustic style

Now the fashion of natural fabrics, so when you make a pot for flowers, you can use burlap. Material can be pasted on the product, adding a few decorative elements such as lace or bows of satin ribbons.

Decoration flower pot burlap can be carried out without glue. Cut out the square of fabric and put into the middle pot, combine all the corners at the top.

Burlap To hold and not slip, pre-sewn decorative headband. On the strip of burlap is sewn edging of satin ribbon. You can use a wide satin band, then it would be possible to insert a thin rope for tying bandages. And you can use a thinner ribbon, and in the end just leave the edges not there are two.

These decorative burlap are used temporarily, for example when there is party or outdoor wedding in a private home. On the porch for guests or around the alley that goes to the table newlyweds, are these pots of colourful flowers. After the feast, the burlap must be removed, as when watering flowers in the fabric will become wet.

Using hemp rope

If you want to use natural decor for decoration of flower pots, the best option would be sticking layers of natural hemp rope. For this you can coat the pot with white glue and starting at the top, attach a rope, tightly winding it around the circumference of the container for plants.

Decorate crafts can make with the help of plexus a few strands of hair. After applying the primary winding on the pot pigtail place the bar on top or bottom of the pot. She is also glued to the PVA. It turns out three-dimensional detail, which diversifies the decoration of the flower pot. The photo above shows how it looks ready.

Sticking egg shell

Decorate the surface of the flower pot can be any material, for example, pasted in a circle broken into small pieces by a shell. To do this, remove the inner foil and rinse the shell well. Then all laid out on a dry cloth for drying. Then smeared with the part surface, which will cover the shell with white glue. It should have a thick consistency.

Part of the shell can be as big or small size, depending on the selected pattern. You can paste over the surface completely, and you can create pattern or a wavy line. It is also interesting to combine this material with others. Subsequently, the shell can be painted in any color. Looks original deposited shells on a colored background. Some masters pre-painted shell, and then paste it. To strengthen the result of work, you need to cover with acrylic paint the entire surface of the pot after pasting such a fragile material. The layer of varnish will keep the egg shell and prevent it from falling out.

A Gentle coating of the pot

You are already familiar with the surface decoration of pots for flowers with fabric. This option in production has similarities. All work is carried out similarly, only a lace not necessarily over the entire surface. You can stick the material to the glue stripes, changing ribbon lace.

To such material, you can add all sorts of additional elements, for example, to create a lush bow made from satin ribbons or combine with a plain or coloured fabric.

Naval

Decorating flower pot with shells, brought from home, will help to fix in the memory the sea and pleasant memories of time well spent. If the shell is smooth and without voids, they are glued to the surface with superglue once, properly placing various types.

If you have collected shells with nothing inside, before gluing the pot should these voids be filled. It is better to use finely chopped pieces of paper or newspaper. The shell is filled completely after soaking the paper in glue. When crafts are completely dry, and it will take at least twelve hours, you can start taping the pot.

Ceramic Mosaic tile

Originally, you can make the appearance by using broken into small pieces of tiles or dishes. You can mosaic to lay down a pattern, but you can just place them in a chaotic manner. Stick the tiles to the pot using tile adhesive. But that's not the end of the work.

To the surface of the pot remains smooth, you need to luted coat. When the plaster dries, the excess washed off with a sponge dipped inwater. This toy is very sturdy and durable. It is possible in this way to decorate the large concrete flower beds in the garden.

The following options are made effortlessly these crafts even by the Amateur. Good luck!