Shotgun MC 21-12

Date:

2018-04-01 07:11:23

Views:

2729

Rating:

2Like 0Dislike

Share:

Table of contents:

The MC-21 is a single-barreled hunting rifle, intended for commercial and Amateur hunting. Many people use MTS shotgun for hunting. There are a large number of negative opinions about MC 21-12. Reviews sometimes talk about the unreliability of such a device, but it still has its admirers. Model 21-12 was the first domestic machine. This is a single-barreled shotguns, automatics which uses energy at impact. It differs from other semi-auto shotguns, which have in the principle of its operation, the inertia and the removal of powder gas.

MC 21-12

The First issue of the guns was held in 1958, but structurally the resulting model was not something new – rather, the gun is made on the basis of the Browning Auto-5. Of course, when designing, the model has undergone very big changes, both inside and outside. For several years he was released only in boxed version and in 1965, after production was transferred to the Tula factory, has been granted production method. Arms production is carried out in modern days.

Dignity YAC

  • Beautiful appearance;
  • The receiver is made of steel;
  • Massive long barrel, which is tapered to 1 mm;
  • Not too heavy weight.
  • Cost is quite acceptable for shotguns MC 21-12. Price is about 10000-20000 rubles for hand weapons.

All of the above advantages a great influence on job hunting shotgun MC 21-12. It has a small capacity, even if the use of powerful cartridges, and apply sharp, heap fight, which is not inferior to even the most famous brands of foreign weapons.

Recommended

Professional figure skates: review, views, and reviews

Professional figure skates: review, views, and reviews

Ice skating is popular with many. But if you do it professionally, you will need the proper equipment. First and foremost, professional figure skates, which have to meet certain requirements. Before I talk about the most popular brands of this mercha...

Spinner for pike with his hands. The most successful turntables on the pike. The best turntables for pike

Spinner for pike with his hands. The most successful turntables on the pike. The best turntables for pike

The Most effective bait when fishing for pike is considered a spinner. Type it is vertical, oscillating, and rotating. While all of these lures has one goal: the imitation of a fish.All about turntablesthis type is characterized by an absolute unique...

Telescopic fishing rod for fly-casting

Telescopic fishing rod for fly-casting

Modern rods are composite structures of glass or carbon tubes-knees, having the shape of a cone or cylinder.When choosing a rod professionals pay attention first and foremost on their basic parameters: weight, material, length with stiffness. However...

Shotgun MC 21-12

Disadvantages

The main disadvantages are improper operation. That is why the weapons and has a lot of negative reviews.

Under development, many of the original mechanisms from the Browning was replaced by a more straightforward, since legacy came out too complex to copy. Subsequently, this has affected the reliability. MC 21-12 is very sensitive to quality of ammunition, namely calibration cases, it is therefore necessary to find a suitable grease depending on the season.

Not the best option for a first rifle

The MTS 12 is a pretty powerful and reliable weapon, which is suitable for different types of hunting where you need to apply an extra shot, for example, while hunting for geese, ducks, moose or wolves, and so on. Of course, the gun is not worth buying as his first firearm because it is quite difficult to operate. But for an experienced hunter fit perfectly. Even if you like guns, then it is clearly not for beginners. Only experienced people will be able to properly care for it and, if necessary, repaired. To understand can I buy a gun novice, it is always possible to go to the Armory forum at the MC 21-12. Experienced advice will help to answer many questions.

If you perform some of the publications about this type of gun, you need to listen to the recommendations that there leave. They say that all weapons that are manufactured to ' 89, will differ much better quality and reliability, and modern to take without trial attacks is very unreliable. Of course, in the store there is no way to make such an attack, and therefore we can say that in this case, buying a "pig in a poke." To begin to gain the necessary experience to be able to cope with this type of gun.

Besides, to get some spare parts have to try or even seek the assistance of Turner. Not the easiest to operate shotgun MC 21-12. Parts are quite rare.

Mechanisms

The submachine gun is on the principle of impact with the long course of the trunk. The barrel is detachable and movable. Rib ventilated. The bore well and efficiently chrome. Locking barrel produced by means located on the frame paddle lugs, which is inserted into the hole of the shank on the barrel. The trigger mechanism has a built-in trigger, which is mounted on a separate base and is designed to produced just a single shot.

The Sleeve of a cartridge is extracted after firing at movement of the trunk in the front position. The structure is able to prevent the shot if the shutter in the barrel is not locked. To prevent accidental shots, set circuit breaker that has a lever type, it will affect the trigger.

The Bed is made from beech or walnut, has nubs for hands and under her cheek. Handguard is made removable and is fixed at the body shop by means of a nut, which has the form of a cap. The store has a tubular shape, he grenade, capable of holding four rounds. When you are shooting shotguns MC 21-12, the cartridge is fed from the store into the chamber of the barrel automatically, at this point, the shutter is moved to the forward position. To make the next shot, press the trigger.

To disable the flow cartridge from the store created by the cut-off. Order staying the shutter is switched to the front from the back, I press the buttoncontrol.

All exterior parts metal parts decorated with the help of planar ornamentation. If the buyer buys the gun souvenir or piece of production, then there will be a more thorough finish. It will differ highly artistic, hand engraved, and on the outer surfaces of the parts will be hand-chasing. Artists make very beautiful drawings on the MC 21-12. Photo confirms this.

Decorative elements

MC 21-12: features

  1. Caliber - 12 mm.
  2. Barrel Length is 750 mm, and the chamber - 70 mm.
  3. Total length equal to 1285 mm.
  4. Muzzle narrowing to 1 mm.
  5. The Efforts that must be applied during the descent of 1.75-2.5 kg.
  6. Warranty made in the implementation of 6500 shots.
  7. Gun Weight - 3.4 kg. when connecting rubber recoil pad, it will change to 3.7 kg.
  8. It can hold 4 rounds plus one in the barrel.

For all guns follow:

  • Bushings of the control that is needed to check vhodnosti in a cartridge chamber;
  • Ring which will be compressed cartridge;
  • Computation, which is used for disassembly and Assembly;
  • Passport, which has all the characteristics of the device, the order of disassembly and Assembly, as well as the rules of service and testimony technical control has taken account of the gun.

Working Principle

the Gun in parsing

When it fires, the barrel will be in a coupled condition with the bolt in the forward most position. The pressure of the powder gas will be transmitted through the sleeve on the slide and barrel, reporting the movement in the box. The back trunk and paddle starts at the moment when the movement of the projectile down the barrel. When moving the barrel and bolt toward the rear, the hammer is cocked and the spring is compressed.

The Movement of the trunk and bolt in the front is due to the impact of the spring. During initial movement of the shutter stops because of the retention lever suppressor, and the barrel continues to move forward. The slide and barrel begin to disengage and the unlocking of the barrel. The barrel will move forward without the bolt, and the movement reflects a sleeve from the box and connecting the feed mechanism of the cartridge that goes on the tray feeder. The cartridge will move due to the impact of the spring store. Activated the recoil spring and the bolt is moved forward, wherein the tray is fed up and sends a cartridge in the chamber, and then comes the retraction of the tray suppressor down, which leads to locking the barrel.

When is the next shot, the whole cycle repeats again. After all the cartridges are in the store spent, then the shutter will remain in the rear position.

The Rules for handling weapons

Rifle

Every person in your house has a firearm, should familiarize themselves with the rules of operation and to have special reference books on the content of the gun. In any case, you can't just buy a gun and go hunting without knowing all the rules. Otherwise it will lead to serious consequences, perhaps even fatal.

The Hunter should ideally know the device of your weapons, the interaction of all its parts, as well as to master control when charging, firing and unloading. Toy certainly can not be called MC 21-12. Photos and videos that are in the public domain, to confirm this. That is why before buying you should read the terms of use.

Every day you need to check the cleanliness of the barrel, breech, chamber, and other parts. Before shooting is to make sure that the barrel is no lubrication and it should not be in the chamber. In no case should not be allowed to into the barrel fell on the snow, sand or small particles of another origin, which can get inside.

Never to check the condition and serviceability of weapons manually, without shooting with the use of cartridges. To check out equipment, you need to have the cartridge with the spent primers that do not have inside powder. This kind of layout.

If there is a misfire, it is impossible to open the shutter for a few seconds as it may still be shot. When you remove the cartridge that misfired, take special care.

If there is some failure or noticed the malfunction of the gun, or noticed any cracks then you must immediately stop shooting until you fix all the breakage.

When the shooting is over, you need a weapon to defuse, and make sure that the cartridge is not in the chamber. It is also worth to train yourself that when you start shooting, you need to make the same check.

After Assembly, always test your weapons MC 21-12, by separating the moving parts back, and hold their hand when returning to the forward position, and to produce a smooth trigger pull. Always avoid idle trigger pull and do not perform disassembly, unless it's absolutely necessary.

Proper care of a gun

MC 21-12

The Cleaning, inspection and lubrication should take place immediately after the shooting took place. To assemble and disassemble the tool needed in a certain sequence, which is specified in the passport. At the same time avoid too much effort or impact equipment.

Wiping the lube or the barrel cleaning produce from the chamber end. Lubrication and cleaning of the barrel, repeat for the second, and in any case the third day after the last shot. After cleaning, inspect the fabric, with a tight course passed through the bore. Ideally, it should not have soot or eventsevery.

Occurs When shot, some part of the propellant gas will get into the box, and therefore must be carefully cleaned this item. To clean grooves, you need to use wooden sticks, pre-making them suitable profile.

Grease and cleaning guns, that is without applying, you need to make about once every few months. If the weapon is long time not in use, should be made conservation. Lubricant on parts always apply a thin layer. The surface should glisten from the applied lubricant. To do this, cut soft and clean cloth wetted with lubricant, tight squeeze and wipe the surface. If too much lubrication, it can lead to failures when fired. Grease can hide in a hole under the shutter release the striker, and it often causes a misfire.

If you hunt in humid environment in the rainy weather or near the coast, lubrication and cleaning is carried out daily, regardless, made the shot or not.

Svintsovo of the barrel need to be removed with a metal brush, which is heavily soaked with oil. If there is soot in the barrel, its softening using soapy water or a solution of caustic soda. If there is no oil RJ, then the cleaning and rinsing produce conventional alkaline oil.

In Any case when cleaning not to rest the barrel muzzle cut in half. This is because the cleaning rod as a piston pump, when you sign up able to pull from the floor all the dust, crumbs or sand. That is why floors need to enclose, for example, unnecessary magazine or newspaper.

If there is fresh rust, you should remove it by the end of the wooden sticks or plain cloth that is moistened with oil RJ or alkaline. To soften the rust, soak a rag in oil, and then put the cloth on the affected area and hold for approximately 10 hours.

If you go out hunting in cold weather, then you first need to give the gun time to warm up after the cold room temperature, and then to begin cleaning.

Transport and storage

The Gun must be transported only in a special case. And also it is advisable to disconnect the trunk may damage it during transport, leading to several problems.

gun Barrel

In Any case it is impossible to prevent the fall of the weapon. To prevent mechanical damage, it is recommended to apply precautionary measures. Make sure that the gun is not subjected to the action of various natural rainfall. Preferably fix the weapon with a rope when taking him to the transport.

You should Always store the gun in a purified state, and it must be well lubricated. The trigger must always be in lowered position during storage. It is best if the trunk is disconnected.

The storage Room should be well heated, with a temperature below 10 degrees Celsius.

The Ammunition for the MC 21-12

The manufacturer allows fire cartridges that have a standard hunting type. Factory options are usually made with paper or plastic liners. If self equip ammo at home, always inspect the sleeve for the control sleeve, and pay special attention to the length and diameter of the flange. Those will be very different should be immediately discarded.

The Shot and powder weighed on ordinary scales, liners and wads are selected with the same weight and size. Do not rush to increase the weight of the powder charge, if there is a partial rollback of the movable part of the gun. First we need to deal with grease, make sure there are no gaps.

In Any case, do not charge in a hunting gun MC 21-12 sports cartridges that are intended only for bench guns. Such cartridges are capable of developing maximum pressure of the powder gases is much higher than allowable for MC 21-12.

The Problem of arms

Often a situation when the shot came, moving parts made the prescribed cycle, the shell casing flew out of the box through the side window, but another patron did not get to his place and just fell out on the ground. Hunter at this point, press your finger on the trigger to make the next shot, but it simply does not follow. To address such a failure, it is necessary to study all parts of the weapon.

A round from the magazine will fall into the lower window of the box only if the feeder tray is in the raised position. The following cartridge will go out of the store when the gun will turn off the stop of the cartridge, i.e. in the case when the trunk is in the front position came without delay. Chuck needs to get to the tray feeder, and he can only pull the shutter. In such a situationit turns out that the shutter is locked with the barrel fine but too early off the arm of the feeder.

Hunters Often are faced with another unpleasant situation. Shot made, but the casing stuck in the chamber and the next round from the magazine went up with the tray on the line chambering and the shutter when moving forward rested this cartridge, and he, in turn, in a casing, which has failed to exit the chamber. The main reason for this complication is the disparity between the standards of flanges and casings, as well as uncalibrated cartridge.

Typically in such situations the usual reloading of the gun, but then the failure can be repeated. In these cases it is necessary to dismantle the weapons and to see all the details, to check the degree of wear, check carefully the grease and possible contamination. Good lubricate and clean all parts.

At home tested the gun only with the help of the layouts. Collect about 10 shells that have broken caps, wipe cloth Nagar, correct the deformation in the cut of the sleeves, put wood-fiber or felt wads, and after a fraction, which is suitable for weight, put the gasket and Zavolzhye. The value of the column of wads selected for height, which provides the length of the layout after rolling, which is equal to the length of the cartridge that is used in the shot. The gun is charged with the layout and now you can test the operation by moving the moving parts with your hands, resting the butt plate MC 21-12 in any surface.

When establish the cause of failure, we should not jump to conclusions, better check the performance by using the layout several times and make sure sure of the correctness of their conclusions. If you need any complex plumbing work and replacement parts, you must contact a specialized workshop, not to do everything yourself. Of course, this advice is only for people who do not have relevant experience.

There are polar opinions about shotgun MC 21-12. Reviews are both negative and positive. With confidence we can say one thing: this is the gun for professionals. Much like the cost of shotguns MC 21-12. The price for a used model may be only 10,000 rubles.

If you follow all the above rules it is possible to ensure trouble free operation of your gun for a long time.


Article in other languages:

BE: https://tostpost.com/be/sport-f-tnes/950-strel-ba-mc-21-12.html

DE: https://tostpost.com/de/sport-und-fitness/947-gewehr-yac-21-12.html

ES: https://tostpost.com/es/deporte-y-fitness/952-el-fusil-de-la-mosca-tsets-21-12.html

KK: https://tostpost.com/kk/sport-zh-ne-fitnes/950-mylty-mc-21-12.html

PL: https://tostpost.com/pl/sport-i-fitness/953-bro-yac-21-12.html

PT: https://tostpost.com/pt/esportes-e-fitness/950-sua-arma-mc-21-12.html

TR: https://tostpost.com/tr/spor-ve-fitness/956-av-t-fe-i-yac-21-12.html

UK: https://tostpost.com/uk/sport-ta-f-tnes/952-rushnicyu-mc-21-12.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

The Japanese diet - reviews, menus and results

The Japanese diet - reviews, menus and results

Margarita Queen is currently one of the most successful and sought after nutritionists in our country. This woman is amazing and the organization of its work were able to lose weight and the stars of our stage, politicians and pub...

Kefir diet

Kefir diet "3-3-3". Diet "3 days - 3 kg": results and feedback

Not far off the long-awaited summer. And summer – this holiday season, the beach near the warm sea. And the beach – it is an occasion to show off your new gorgeous swimsuit. If only for the winter, he inexplicably has ...

What to do to get thinner legs fast

What to do to get thinner legs fast

Modern women understand that most men pay attention primarily on the state of the body. What to do to lose weight legs if they don't match your ideals? First of all, start to eat right and perform daily exercises. the Diet you nee...

Molasses is what is how to do it yourself

Molasses is what is how to do it yourself

Molasses is a syrupy liquid, which is generated during the manufacture of sugar. In French means molasses black color. Has a dark brown color and noticeable odor. Yet it is called molasses feed. In some countries, as, for example,...

Exercise vacuum belly: reviews and photos

Exercise vacuum belly: reviews and photos

Every woman wants to have a thin waist, believing that it will emphasize femininity. Really, a beautiful waist is really attractive. But unfortunately, not every lady can boast of it. Even if the girl is very beautiful figure, the...

Soviet athlete Benjamin Booth: biography, accomplishments and interesting facts

Soviet athlete Benjamin Booth: biography, accomplishments and interesting facts

In this article we will talk about a famous athlete, and now already the President of the Association for rowing - Benjamin booth. The fate of this purposeful, responsible, strong man is not simple, but rich in events. Let's start...