How to fill a rink in the backyard: the features of the process

Rink in the backyard-it's great fun for children and adults. Here they can have fun, to spend their overflowing energy, to improve the physical form and just have fun. Of course, this rink must be correctly build. Make it your own is quite possible, however, it is necessary to know some subtleties of the process.

How to choose a place to work?

Before you pour the ice, you need to find a suitable place and prepare it. If you have a multistory house, near which there is a Playground, a homemade ice rink can be equipped there. Of course, you need the permission of all the tenants and the housing Department.

The surface that will be used under the roller, must be flat, without any hills or holes. It is desirable that it had a slight slope. In this case water, which is formed after the ice melts, will flow, without harming the coating platform. Of course, it is necessary to define the future size of the rink. The area should be well lit, have full access and be away from the road.

Training grounds

All work must be carried out during suitable weather. The base should be cleared of debris, snow and ice. Only now you can proceed to its preparation. That is clean must sprinkle the snow, and it is well compacted. The thickness of the layer should be at least 5 cm. Compacted snow must be very tight, so it was possible to walk freely without falling. If the site does not have sides, you can make them yourself out of snow or wood planks. If the base is prepared, you are ready to fill.

Recommended

Professional figure skates: review, views, and reviews

Ice skating is popular with many. But if you do it professionally, you will need the proper equipment. First and foremost, professional figure skates, which have to meet certain requirements. Before I talk about the most popular brands of this mercha...

Spinner for pike with his hands. The most successful turntables on the pike. The best turntables for pike

The Most effective bait when fishing for pike is considered a spinner. Type it is vertical, oscillating, and rotating. While all of these lures has one goal: the imitation of a fish.All about turntablesthis type is characterized by an absolute unique...

Telescopic fishing rod for fly-casting

Modern rods are composite structures of glass or carbon tubes-knees, having the shape of a cone or cylinder.When choosing a rod professionals pay attention first and foremost on their basic parameters: weight, material, length with stiffness. However...

What are the tools required for the job?

Before you make a rink in the backyard, you need to collect the tools you will need:

- wooden planks (for construction boards);

the outdoor skating rink (for compaction of the snow);

is the average diameter hose (fire hydrant)

- spray (in order for the ice was homogeneous);

- big broom (to eliminate irregularities and excess of ice).

Of Course, you also need plenty of water, so just think about where you will take. In this case, too, it is possible to agree with the house control.

The Right fill the rink

Now go, in fact, to the spraying water. This should be done at a temperature which is not higher than 4 degrees Celsius. Otherwise, the water will be a very long time to harden. Before filling the rink in the yard, prepare the hose, check to see how airtight is its connection to the crane, and put on his gun. If this element is not used, then the ice will fall with the influx and is not uniform (especially in the bitter cold).

So how to fill the rink in the backyard is simple, we must not forget about the small nuances that are present in the work. For example, both the first and all subsequent layers must napilasja very carefully, without the formation of large puddles. The thickness should be at least 1.5-2 see If the roller surface is not entirely smooth, you can smooth with hot water, rags and mops. It is not necessary to do the shading in the snow. In this case, the surface will be bumpy.

Before you fill the rink in the backyard, keep in mind that to do the procedure need some time. That is, the structure between the layers is necessary to do exposure for some hours to the ice had a chance to harden. Before each of the following must fill the previous surface to level and clean of snow. Water hoses must not lay on the ice, as it can quickly melt under them.

Note that the fill needs to be done and clockwise and counterclockwise. While spraying water in a circle. The wind must blow you in the back. If the ice has holes or cracks, they must be eliminated. For this purpose the slurry of snow and water. After “refurbished” hardens, it needs to be sanded.

Particularly care for roller

Before filling rink in the backyard, keep in mind that it requires some care. Only in this case he can for as long as possible to delight both children and adults. For example, you need to remove snow from the ice surface. If, after operation of the rink, it appeared defects, the surface would have to fill. To update the latest layer it often enough.

Once a week, clean the rink a MOP and a soft cloth. After this procedure, ice is not only clean, but also smooth. For snow removal you can use a plastic shovel. Naturally, all the tools to take care of the ice rink must have universal access. For example, to remove the snow from the rink for children, and the fill will produce are already adults.

It Should be noted that such ice rink can be done in the yard of a private home. Of course, it can be much smaller in size, but will bring much joy to the kids. Good luck!