How to make rakolovku yourself?

Most people love such freshwater delicacies as crayfish. However, many who live on the banks of ponds, I do not know the ways of catching these animals. So below, you will learn how to make rakolovku, which works almost perfectly.

A Simple device for catching crayfish

around the world of these animals for many centuries to catch using the most simple tools. If used for their manufacture required a lot of time today to our services a variety of materials and tools that you can use for a couple of hours to make an effective trap. How to make rakolovku from scrap materials? The most simple and primitive trap is made from a small piece of fine-meshed nets, made of thin wire. Form this trap – conical. It has long proved its effectiveness. For retraction of the mesh into the shape of a truncated cone need screed (thick wire) and nylon thread.

How to make rakolovku their hands? Manufacturer traps start with bending rings. To do this, bend the wire so that the lower ring had a diameter of about 50 cm, and top – about 20 cm These dimensions proven over the years, so not worth much to experiment in this direction. The rings shall be manufactured from a wire so its weight is allowed to slowly sink rakolovka on the bottom, not turning it. With ties to the ring of larger diameter is attached to the grid. It should not SAG. The optimal interval between ties – 6-7 see If there is a thin aluminum or copper wire for attaching mesh, you can use the strong nylon thread.

Recommended

Professional figure skates: review, views, and reviews

Ice skating is popular with many. But if you do it professionally, you will need the proper equipment. First and foremost, professional figure skates, which have to meet certain requirements. Before I talk about the most popular brands of this mercha...

Spinner for pike with his hands. The most successful turntables on the pike. The best turntables for pike

The Most effective bait when fishing for pike is considered a spinner. Type it is vertical, oscillating, and rotating. While all of these lures has one goal: the imitation of a fish.All about turntablesthis type is characterized by an absolute unique...

Telescopic fishing rod for fly-casting

Modern rods are composite structures of glass or carbon tubes-knees, having the shape of a cone or cylinder.When choosing a rod professionals pay attention first and foremost on their basic parameters: weight, material, length with stiffness. However...

How to make rakolovku effective?

After production of the base are made of struts that support the top of the trap. For them, as a rule, use wire, although in its absence it is possible to use and suitable wooden sticks. Then the lower and upper base are connected in the form of a truncated cone. The optimum rigidity of this design will give a 4-5 spacers. On made frame evenly natjagivanii the net. It should completely cover the entire structure (except the entrance hole at the top of the trap). All joints are carefully pulled together.

How to use a trap?

Many fishermen know how to make rakolovku. The photo above shows some of the most simplest traps. Typically, they all operate on the same principle: cancer through a narrow aperture gets inside rakolovki with bait, and ago, already can not get out. All traps (conical, cylindrical, parallelepiped) placed over the upper portion at three points over a long rope and fall to the bottom of the reservoir. In an oblong device for catching these animals entry holes are often located at both ends. Now I understand how to do rakolovku, well, what bait should I use it? Usually the trap is attached a piece of meat or dried liver. For more catch, you can use several special traps located along the coast.