Decking: reviews, photos and specifications

A Beautiful deck or terrace will be even more harmonious look, if it is covered by a special Board. However, it should be specific to the material is ordinary wooden floorboards are not suitable for this. Experienced craftsmen will tell you that you need special decking. Reviews about it can be read on any specialized construction portal.

Purpose

For arranging summer areas near the house or pool area they often use wooden materials. However, it should be understood that the effect of moisture and sudden temperature changes adversely affect the condition of the product. To reduce the influence of these factors is possible in the following ways:

• The Use of expensive breeds of a tree, boards of which do not change their configuration under the influence of moisture or temperature.
• Application of technology in the manufacture of wood-polymer composite (WPC). This is a relatively new method of production, resulting in high-quality composite decking. Feedback about its performance characteristics are good, which affects a constantly increasing demand.

It is Noteworthy that the products of WPC outwardly resemble the structure of the tree. Scope depends entirely on the installation site. On the terraces with a protective roof, you can install boards of different wood. But by the pools or ornamental ponds is recommended to use boards made of WPC.

Options and features

What to look for when choosing a particular model? First of all – technical properties of the material. Good performance has composite decking. Reviews say about the resistance to mechanical impact, maintaining the original color and ease of installation.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Key features of decking can be divided into 2 categories: technical and aesthetic.

Technical:

• Overall dimensions. Depends on cutting material, the number of nonconforming remainder.
• Thickness of the product. Describes the maximum load that can withstand the Board.
• Resistance to moisture and temperature.

Aesthetic

• Color. Is selected according to the developed design.
• Texture. Even if you use a Board made of WPC, try to find models with imitation wood coating.

But the main parameter is the raw material of manufacture. It directly affects all of the above characteristics.

Materials

Until recently, used only wood products. But the emergence of new technology applications, EMD has made significant adjustments in the product range. Thanks to the affordable cost and large number of models are increasingly installed decking plastic. Reviews about it are mostly positive.

Hardwood decking is made of precious wood, which is resistant to atmospheric agents. This affects product cost – expensive models, not all can afford it. However, they have certain advantages. First of all, it is a natural material that is in the process of operation does not emit harmful components. Also, it can be subjected to a surface treatment for repair and restoration work.

Wooden Board

Usually manufactured decking made of larch, which can be found on specialized portals. For the manufacture of products used complicated technological scheme.

The first step is culling work pieces. After cutting, check the condition of the surface, no knots and cracks in its structure. Then the material is sent for drying in a special chamber. As the % content of moisture in the wood can be up to 60%, you must reduce this figure to 15%. Otherwise, the finished product may be deformed due to uneven swelling of the fibers.

Then, the workpieces are processed by milling machines and surface oil for decking. Reviews about such products say about the usefulness of treatment with protective formulations. This limits the access of moisture to the material structure, which affects its service life.

Board of DPK

A Modern method of production of WPC boards is the integrated application of manufacturing technology of polymer products. The basic material used is PVC. The Committee added the wood chips, and then by heat treatment to form pellets.

They subsequently used in extrusion technology. In filling the silo covered with granules, and as you move along the line are subjected to heat. After the formation of the plastic mass, it is under high pressure is fed into the extruder. Passing through a shape (die), the end product - decking. Reviews about it are positive in nature, as with a professional approach to the production process of the emergence of marriage is almost completely excluded.

To create a texture that mimics wood, immediately after passing the die on the front side of the product is applied to the film. Then by diffusion-it forms together with the basis of a single structure.

Installation

The Technology of installation depends on the type of source material. If you need to install the track near the pool – is selected decking WPC. Feedback about these designs depend on compliance technology.

First you must make a steel frame, which will later be installed products. Its surface is treated with protective materials that will prevent rust. It is best to use a square tube of stainless steel. The connection of the individual floorboards is performed by using the grooves located on the end product. During installation, checks the gaps between them and compliance levels.

Clock

Another advantage of floorboards from WPC is their durability and minimal care. The situation is quite different for the woody material, which is made of decking. Reviews indicate the need for periodic polishing of the surface. Over time, the material can change color or have any defects. To address these deficiencies using a special grinding machine. After removing the upper layer, the surface of the Board is treated with oil.

The Frequency of these activities depends on external factors-precipitation, time of direct exposure to sunlight, degrees of temperature difference. For quality floorboards restoration work carried out 1 time in 5 or 6 years.

Tips

How to choose the optimal model cover? It is recommended to use simple tips:

• Specialist. He'll determine how good this decking reviews, which can be ambiguous.
• Calculation of the optimal number of products. For this a plan of the terraces, and according to its dimensions are selected boards with an optimal size.
• Cost. Cheap products often has low mechanical strength and short lifetime. Therefore, it is recommended to choose models of an average price category.

It is Important that the installation was done by a specialist. There are many nuances of installation of decking boards, the ignorance of which can affect not only the appearance, but also in the life.