Dismantling the window: the stages of the work. How to replace old Windows with new ones?

Date:

2019-04-29 20:20:37

Views:

625

Rating:

1Like 0Dislike

Share:

Table of contents:

Sooner or later every owner of residential square meters there is the question of replacement of Windows, no matter they are wooden or metal. In any case, the disassembly window consists of several stages that should be known by any man, especially if he spends all the work yourself.

disassembly window

Get started

All work starts with inspection of the opening and the window. Need to find where the window is attached to the opening. Next you should carry out preparatory work.

Preparation

From the window sill you need to remove all extraneous things, flowers and all kinds of interior. You can put curtains. You must provide free access to electric networks. The furniture and other objects in the room, it is recommended to cover with a cloth or polyethylene, so they are not damaged and not dirty.

Immediate dismantling works

Removal of old Windows begins with removing the casement Windows with the hinges. In views where there is deaf part, you will need to remove the glazing beads and remove the glass.

You can then remove the sill. The material from which it is made, depends on the process of its dismantling. If the sill is of concrete, it will have to be removed with a hammer and a valve grinder. All other sills are usually completely removed without any problems.

The Next stage of the dismantling of the window – the withdrawal of the tide. The main thing is to determine how the tide was fastened to some of the parts of the window opening. It is usually mounted directly to the profile of the window or frame.

dismantling of plastic Windows

You can Now fully remove the window from opening. Commonly used mounting the cutter or hacksaw, jigsaw. After removal of the frame from the window opening is carried out the dismantling of the slopes. This does not apply to those slopes that consist of a cement-sandy solution. The rest can be easily removed. If the slopes were insulation, it is also being dismantled. All window aperture is almost ready to install the new frame.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

If in the future plans - the installation of PVC Windows, then you should try as accurately as possible to dismantle the old so as not to damage the opening. It is clear that the cost of installation/dismantling by professionals - not a very expensive service (for the first procedure will take about 1,300 rubles per sq. m., and for the second - from 140 roubles per square), but the whole window opening, the easier and cheaper to install a new window. If you avoid the errors failed, they have to remove and completely restore the integrity of violated design to ensure maximum air-tightness of the window installation. Accessories in this case will not wear out quickly.

After all demolition work to remove the room and go to the stage of installation of new Windows.

Installation work on the installation of new Windows

First of all, before dismantling should call Gager. He clearly miscalculated the dimensions, which will made a new window. Of course, if you feel confident or have experience in similar works, it is possible to do everything yourself. If the measurement was made by you, after no manufacturer will take back UPS if they don't come to the opening.

dismantling of plastic Windows

Brought the window profile must be checked for integrity. Special attention should be paid to the fact that it should not have scratches and is completely covered with a protective film. Should not take product that has chips, cracks or any other defects. The protective film is removed after carrying out all installation works.

dismantling and installation of Windows

The Stages of work

Most Importantly, when ordering new Windows, don't forget about their versatility. It is best that the disassembly window is not over a replacement for the same window. To date, the window can have a different shape and open at any position, etc, they have a lot of advantages and advantages over older designs.

Once the Windows are delivered, work to install them. All aligned on the level of the window frame. Definitely laid waterproofing. The window frame itself is mounted on a special mounting elements with mounting foam. Foam is also the perfect sealing of the window and the window opening. After that set the window-sill and low tide. Importantly, the dismantling of plastic Windows was carried out very carefully, then simply install the new quickly and efficiently. Only after the entire installation procedure remove the protective film from the profile and a adjustment of accessories.

Installation of wooden Windows

From the point of view of energy saving and other insulating qualities, wooden Windows are the best option.

Wooden double-glazed Windows provide a high degree of air exchange in the room will always be an optimal level of oxygen, humidity and heat. Wooden Windows are suitable even for apartment, whose Windows overlook the bustling street or highway. In this case, no noise will not disturb.

Another advantage: wooden double-glazed Windows perfectly withstand temperature changes, they do not spoil and at -50 and +50 degrees. No difference in the installation of wooden and PVC Windows, the main thing - accuracy inwork.

dismantling of old Windows

What can result from improperly performed Assembly work

If the dismantling of plastic Windows comply with all the rules, and installing the new shouldn't be a problem. However, it should be understood that if the technology is broken, there may be a number of problems in the process of operation:

- moisture can accumulate on the surface of the installed glazing;

condensate may appear on the surface of the plastic or wooden profile;

- can grow mold not only on slopes, but also on the window and the windowsill;

- you may receive a blowing in the joints between the frame and the aperture;

- doors can be lay down loose that will cause drafts.

the cost of installation of dismantling

Self-dismantling and installation of Windows deprive them of the new owner the right to any recourse to the manufacturer and installation companies on the quality of the glass. Of course, there is no possibility that the work that will guide the installer of the manufacturer or the seller, will conform to the standard, but in this case, the guarantees will be, and the double glazing salesman will have to fulfil their obligation to eliminate all defects.

If you are not ready to independently perform the removal and installation of new Windows, do not have such experience, then, picking up installers, pay attention to the following points:

- best, to employees of the company had a long experience in carrying out similar types of work;

- refer to those experts, which advises directly the manufacturer of the window frames;

- make sure a written contract with the contractor and describe the product warranty and the process of correcting defects and deficiencies in the work of installers;

- require of guarantee from the manufacturer for supply of the window.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/32486-demantazh-vokny-etapy-pracy-yak-zamyan-c-staryya-vokny-na-novyya.html

DE: https://tostpost.com/de/gem-tlichkeit/32176-demontage-fenster-phasen-der-arbeit-so-ersetzen-sie-alte-fenster-gegen.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/32040-desmontaje-de-la-ventana-etapas-de-trabajo-c-mo-reemplazar-las-ventana.html

KK: https://tostpost.com/kk/domashniy-uyut/32828-b-lshekteu-terezeler-keze-der-degen-esk-terezeler.html

PL: https://tostpost.com/pl/komfort-domu/33869-demonta-okna-etapy-pracy-jak-wymieni-stare-okna-na-nowe.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/33649-desmontagem-da-janela-fases-do-trabalho-como-substituir-a-antiga-janel.html

TR: https://tostpost.com/tr/domashniy-uyut/29246-s-kme-pencere-al-ma-ad-mlar-nas-l-eski-pencereleri-de-i-tirmek-i-in-ye.html

UK: https://tostpost.com/uk/domashn-y-zatishok/33037-demontazh-v-kna-etapi-roboti-yak-zam-niti-star-v-kna-na-nov.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

How to choose lamps?

How to choose lamps?

If you face the issue of choosing the gate for your garage, first determine the main characteristics to which they should respond. What is more important - the cost, convenience or free space? Offered in the market of options is q...

How to spend in private homes sewer. How to conduct a sewer in a private house

How to spend in private homes sewer. How to conduct a sewer in a private house

a Private house, not equipped with sewage system, not very comfortable to live in, especially in cold weather. You have to wash in a basin and toilet to run in the rain and frost. And what to do to the person who bought the mansio...

What to feed an Orchid in the home?

What to feed an Orchid in the home?

the Orchid is an extremely beautiful but capricious flower. Typically, the growers acquire a flowering plant, pleasing those around her, but often, after flowering do not know how to handle it. Improper care can lead to disease or...

Windows Veka: owner reviews and features profile

Windows Veka: owner reviews and features profile

the Common is now a classic wooden Windows gradually deteriorating, moreover, even in the normal state does not provide an adequate level of comfort for the inhabitants. When using wooden Windows become commonplace draught, consta...

Adhesive for glass: application features

Adhesive for glass: application features

Universal adhesive for glass is designed to work with different materials. It allows you to string together glass surfaces, gluing glass stones, metal, rubber, wood. It can be used to repair the mirror, and laminated glass is also...

Incubator auto: tips for choosing. Automatic incubators for eggs: reviews, prices

Incubator auto: tips for choosing. Automatic incubators for eggs: reviews, prices

For safety of chicken and quail eggs are used as incubators. Modern models are manufactured with automatic roll mechanism. The dimensions of these devices are quite different. They are produced both for smallholders and for large ...