Ceramic brick: the advantages and disadvantages of this material

Date:

2019-07-15 09:20:30

Views:

764

Rating:

1Like 0Dislike

Share:

Table of contents:

For many decades, ceramic brick is considered to be one of the most popular building materials. After reading today's article, you will learn about the main advantages and disadvantages of similar products.

What is this material?

It Should be understood that the ceramic brick – it is a product which has no voids. It is produced from refractory organic clay. Typically, this material is widely used for construction of exterior and interior walls, so it can be called universal.

ceramic brick

Thanks to the excellent bearing abilities and unique characteristics inherent in such products, they are successfully used for construction of any facilities, including basements, warehouses and industrial premises, as well as putting some of the Foundation. But due to the fact that the number of voids in the brick does not exceed 13 %, it has a high conductivity, so he is not able to protect neither from heat nor from cold.

Features of production

Outset that the manufacture of such products is engaged in brick factory. The technology includes a number of relatively complex processes, adherence to the sequence which is reflected in the quality of the final products.

brickyard

It is Important to properly prepare the extracted and delivered to the plant raw material for the subsequent forming and heat treatment. For this clay, previously spared from stony inclusions, it is necessary to humidify with steam so that it acquired maximum flexibility.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Then she goes on further, fully automated molding the raw bricks. Feed the raw material cut into billets of a certain size. And they should be a little more end product because the clay that has undergone all process steps, minimal shrinkage.

The resulting billet is sent to the drying. It's quite a long process, the acceleration of which can lead to cracking of the product. The product is then placed in a special kiln, the temperature reaches thousands of degrees.

In addition, a modern brick factory can apply the so-called dry pressing technology. It includes steps such as hydration of raw materials, followed by grinding it into a powder, forming semi-finished products and firing.

Variety

To date, produced several varieties of such products. Depending on the size, you can find ceramic brick, single, modular, thickened and the so-called Euro-variant. In the thermal characteristics of all products are divided into ordinary and effective.

ceramic bricks single

In addition, there is another classification. Depending on the application, and produces a ceramic brick ordinary solid, facial and special. First intended for the interior elements enclosing and bearing structures, the second – for building fences and facade cladding, the third is ideal for use in high temperatures.

The Advantages and disadvantages of this material

Currently, the ceramic brick is replaced with a construction market with its hollow counterpart. This is because it has a number of advantages. The main advantages of such products could be considered environmental friendliness, excellent sound insulation and high durability, thanks to which it successfully used for the construction of Foundation, erection of ground floors, masonry fireplace and chimneys.

Like any other material in ceramic bricks there are drawbacks. One of the major disadvantages is considered a relatively high cost of such products. In addition, he is prone to efflorescence. Therefore, a single ceramic brick in need of a quality solution. Otherwise, over time the wall will become not too aesthetically pleasing appearance. In the process of capital construction is important to use the lining material from the same batch, otherwise you may have problems with the tint.ceramic brick ordinary solid

Useful tips

In the process of laying a brick wall, it is desirable to use a hard cement-sand mortar. It is important to keep the thickness of the seams was about eight millimeters.

We should Not lose sight of the fact that the high strength of the walls which significantly complicates the process shtrobleniya grooves required for laying of engineering communications. Therefore, we should think about this at the stage of construction of the building.

In addition, the laying of brick involves plastering and painting works. This is due to the fact that the material which has no voids, is not well bonded to the mortar.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/35260-keram-chny-polnotelyy-cegla-peravag-nedahopy-dadzenaga-materyyalu.html

DE: https://tostpost.com/de/gem-tlichkeit/34930-keramik-vollziegel-vorteile-und-nachteile-des-materials.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/34785-cer-mica-polnoteliy-el-ladrillo-ventajas-y-desventajas-de-este-materia.html

KK: https://tostpost.com/kk/domashniy-uyut/35557-keramikaly-ty-yz-k-rp-sh-arty-shyly-tary-men-kemsh-l-kter-osy-material.html

PL: https://tostpost.com/pl/komfort-domu/36661-ceramiczny-ceg-a-pe-na-ceg-a-zalety-i-wady-tego-materia-u.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/36460-cer-mica-de-tijolos-vantagens-e-desvantagens-deste-material.html

TR: https://tostpost.com/tr/domashniy-uyut/31980-seramik-tu-la-avantajlar-ve-dezavantajlar-bu-malzemenin.html

UK: https://tostpost.com/uk/domashn-y-zatishok/35784-keram-chna-povnot-la-cegla-perevagi-ta-nedol-ki-danogo-mater-alu.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Three-phase meter

Three-phase meter "mercury 230": reviews and connection diagram

the Meter "mercury-230" – this equipment which is designed to account for power and energy (reactive & active) in one/two directions in three-phase 3 - or 4-wire AC systems (50 Hz) by means of measuring transformers. It has ...

Rack ceiling in a bathroom - how to make the right choice?

Rack ceiling in a bathroom - how to make the right choice?

to begin to repair in your apartment, you should think in advance how to choose a ceiling. Particularly acute this issue is for the bathroom. Constant temperature changes and high humidity levels can adversely affect many types of...

Farm: types of farms, description, classification and working principle

Farm: types of farms, description, classification and working principle

the construction of the farm cover a different scope, addressing mechanical power and frame subassemblies. In essence, they represent the core of the system, which, depending on operating conditions may provide different degrees o...

The root system of the arborvitae: features, photos, dimensions

The root system of the arborvitae: features, photos, dimensions

Most gardeners when choosing evergreen conifers prefer to unpretentious and very beautiful tree - Thue. In appearance thuja has a similarity with its closest relatives: juniper and cypress. It is characterized by a pyramidal shape...

When to transplant a gooseberry: features, technology and reviews

When to transplant a gooseberry: features, technology and reviews

Gooseberries almost every suburban area. This shrub is not particular care annually and pleased gardeners with sweet berries, of which it is possible to prepare jam, jams and compotes. However, sooner or later, the gooseberry tran...

How to make a gun out of LEGO? Will figure it out together

How to make a gun out of LEGO? Will figure it out together

Want to make a child pleasant? This, of course, will be about the boys. Because they're available to purchase both fascinating and thought-provoking and imagination of the designer “LEGO-gun”.the long-Awaited saleAnd h...