Door locks: install your own hands. The choice of lock for the front door. Replacement and repair of door locks

Date:

2019-08-25 16:00:32

Views:

773

Rating:

1Like 0Dislike

Share:

Table of contents:

door lock mortise

The process of insertion of the lock - a simple matter, especially if the design of the lock easy and the door is ordinary. To cope with this task can be anyone, but provided that you're know what a chisel and a hammer.

Consider the main types of door locks. The type of attachment they are mortise and patch.

Mortise locks

It is Often door mortise lock installed on metal door. In wooden this place will be weak and vulnerable. Door mortise lock is integrated directly into the door.

Making the choice, it is very important to pay attention to the thickness of the face plates of the lock, it should not exceed the thickness of the door and its depth. Such locks are used for left-handed designs, and to the right. In addition, there is the door locks, the installation of which does not depend on which way the door opens. The main advantage is that to disrupt them in any way will fail.

Overhead door lock

They have this name due to the fact that imposed directly on the door. For the installation you do not need any special skills, and the process will not take much time. Most of these locks are used in combination with other types, for example, a lever. To strengthen the protection use the latch or chain.

The type of locking mechanism all locks can be divided into three groups: suvaldnye, cylinder and electro-mechanical.

Lever locks

This type is today considered the most reliable when compared with other types of locks. In this case, the reliability depends on the number of levers. This so-called plates that turn the key and lock the lock. The more, the housing is better protected against tampering.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

door locks installation

Despite all the advantages, such a castle, there is a disadvantage, which is size - they are large enough. This makes it impossible to use lever locks in the subtle front door.

Also, certain inconveniences may be while using the key, he's too big to carry him uncomfortable. Some lever locks are equipped with units conversion. This function allows to change if necessary the key, replacing the lock in this case is not required.

However, the disadvantages of this type of constipation is so petty in comparison with all its advantages that use it is still quite profitable. Often locks fitted 4-5 levers, which makes them protected from drilling, perelivania or other ways of hacking.

Cylinder locks

replacing locks

Cylinder samples have the structure of the cylinder, or cylinder for door locks. This type of constipation is quite reliable, as protected from the use of keys.

The lock Cylinder may have holes for the keys like on both sides and one side. In the second case, on the “internal” side is the turntable that allows you to open and close the door without using the key.

For installation in the door you need to make a hole so that the larvae for the door locks were not visible (to avoid hacking). To prevent possible knocking used for more grips that come from the inside.

This type of door lock has its disadvantages, for example, there is the possibility of mechanical cracking, breakage systems, as well as the dependence of health from humidity and temperature changes.

Electromechanical locks

Smartlock, or “smart” lock. They consist of mechanical and electronic parts. In that case, if the battery is ended and electronic lock opening is impossible, you can always use an ordinary key. Electromechanical representatives can be equipped with digital panel, chip-key system that is designed to detect retinal or fingerprint.

Also the door lock for the front door can be locking or locking. The second option implies a latch, which can be removed with an ordinary turning handle.

door lock for front door

Setting the lock in a wooden door

Replacement door locks in the interior doors may be held without the help of professionals. First you need to select the type of bolt that you will use for installation. Installation of inset and surface-mounted lock are slightly different from each other.

If you are going to install a carved castle, then you need to stick to a particular plan:Interior door locks overhead installed fast enough. For this you need to mark where it will be located, mark spots for the screws and the keyhole, to do for the last hole, to fasten the lock to the door by means of screws, to cover it from the outside and from the side.

  1. Prepare the necessary tools. Replacing locks will require you to have a saw, a drill with a drill on wood, crowns, chisels, drills, screwdrivers, tape measure and marker.
  2. To Mark with a marker the contour of the lock frame, it should be done from the front side.
  3. On the side of the doorcut around the outline used to the locking mechanism.
  4. Mark the location of the keyhole.
  5. Drill a hole in the door leaf, using the drill. The hole should not be through.
  6. For removal of excess material, use a hammer and chisel. The cavity must be such that the lock fit perfectly into it.
  7. Insert in the hole of lock, after which the circle at the end of the mounting strip and the location of holes for installation of fasteners.
  8. To Make a hole for straps, handles and keyholes. The last hole should be through.
  9. Insert and secure locking mechanism.
  10. To Secure the bar-lock, which must be positioned at the end face of the door. To facilitate this process, you need to smear the bolt with chalk. Turning the key, you activate the action of the pins, which will leave a mark. This trail will help to determine the position of holes for fixing directly to the castle.
  11. Using a chisel, the opening should be deepened, taking into account the size of the tongue. You also need to knock the box fits the contours of the strap-retainer, then this level set and secure the screws.
  12. To Verify an installed lock.

Regardless of what you choose door locks, installation requires patience and accuracy.

Preparing for lock installation: tools

interior door locks

Before you install the lock on the metal door yourself, you need to carefully think things through and make sure that you really can handle it. First you need to prepare the necessary tools. You will need:

  • Drills metallo;
  • Drel;
  • Koronka;
  • Pila;
  • Otvertka;
  • Passatizhi;
  • Samorezy;
  • No;
  • Linaka;
  • CERN.

You Also need to think carefully about the security and care of safety glasses and gloves.

Door lock: installation on a metal door

Having Prepared all the necessary tools and selecting the door locks, you can proceed with the installation. It should be done in the following sequence.

  1. larvae of the door lock

    Swipe all the necessary measurements.
  2. Attach used the lock to the door and designate a place where there will be openings, including for a key.
  3. Swipe marks on the side of the door.
  4. Make a rectangular hole using a grinder.
  5. Insert the lock mechanism into the resulting hole and mark places for screws.
  6. Try to fix the lock. If this process does not cause problems, mark the locations for keys, and then drill the holes.
  7. Secure lock and test it.
  8. Install the pads on the lock.
  9. Drill holes for bolts.
  10. Attach the trim lutke door.

All you have working door locks, the installation is finished.

Choosing a door lock for the front door, very carefully check the conformity of a product certificate, so you feel secure in your own home.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/36237-dzvyarnyya-zamk-stano-ka-sva-m-rukam-vybar-zamka-dlya-vahodnyh-dzvyare.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/35731-las-cerraduras-de-las-puertas-la-instalaci-n-de-sus-manos-selecci-n-de.html

PL: https://tostpost.com/pl/komfort-domu/37781-zamki-instalacja-w-asnymi-r-kami-wyb-r-zamka-drzwi-wymiana-i-naprawa-z.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/37557-fechaduras-a-instala-o-de-suas-pr-prias-m-os-a-escolha-de-um-castelo-p.html

TR: https://tostpost.com/tr/domashniy-uyut/33012-kap-kilitleri-kurulum-kendi-elleriyle-kilit-se-imi-i-in-giri-kap-s-ona.html

UK: https://tostpost.com/uk/domashn-y-zatishok/36834-dvern-zamki-ustanovka-svo-mi-rukami-vib-r-zamk-v-dlya-vh-dnih-dverey-z.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Installing fences: types, construction and features

Installing fences: types, construction and features

Today in the world used a variety of different fences. They have a number of characteristics and serve different purposes. In the manufacture of these vertical structures are different materials. Their choice depends on the featur...

Terminal box: purpose, description

Terminal box: purpose, description

Over a hundred years ago, with the introduction into everyday life of electricity, humanity had finally taken the technological direction of our civilization. Now we are surrounded by different electrical appliances and equipment....

The

The "thermal barrier", fire-retardant paint: consumption, specifications, characteristics

load-Bearing metal structures – the most durable products able to stand against many disasters, but not against all: unfortunately, even metal could not stand against the pressure of fire. This is very dangerous because in a...

Tall Cabinet for kitchen: beautiful, ergonomic, comfortable

Tall Cabinet for kitchen: beautiful, ergonomic, comfortable

increasingly in the design of modern apartments a narrow, but very convenient side Cabinet for the kitchen. More recently he has become a real trend in modern design kitchens. The main objective of such furniture – to facili...

What is the shutter: definition, functions, importance

What is the shutter: definition, functions, importance

What is the shutter? You've probably heard that word at least once in life, for example, in the childhood at lessons of drawing. Shutters – some predecessors of modern relletov that perform protective and energy-saving funct...

The crisper drawer in the fridge - what is it? Built-in refrigerator with crisper drawers

The crisper drawer in the fridge - what is it? Built-in refrigerator with crisper drawers

Hardly anyone even 10-15 years ago could have imagined that today will be sold refrigerators with so many functions. Displays, sensors, special zone for storing vegetables, fruits etc is now available to every consumer. Let's talk...