Suspended ceiling type "Armstrong": device specifications

Today, for the ceiling finish is applied a variety of different materials. They differ in operating characteristics, method of installation. One of the best options for finishing office spaces, buildings, shopping, entertainment centers are Suspended ceilings “Armstrong".

The Presented material is sometimes used in private construction. However in public areas it is still mounted more often. This is due to installation. The presented plate is easier to install in a large room. In this case, the finishing will be completed faster.

General characteristics

Features suspended ceilings type "Armstrong" Make them popular in modern construction. This finishing material is characterized by ease of Assembly and relatively low cost. Before other kind of finishing it has a lot of advantages. Is this material some disadvantages. They need to know before starting the installation.

Today in category ceiling type "Armstrong" get frame products, which consist of cells of a certain size. These plates are made from different mineral components.

Mount suspension design will practically everyone. Even the master without much experience can assemble such a ceiling. And the installation will not require much time. The installation of this variety of finishes made in almost all areas. However, before choosing, you must familiarize yourself with their basic features.

Advantages

The Device of false ceilings of type "Armstrong" has a lot of advantages. This finish option will allow you to access the vents if needed. Under the plates can be mounted wires, sensors and other devices. Access to them would also not be hampered.

If the radix is not different aesthetic appearance, the plates will close it. The ceiling will be perfectly smooth. Care for ceiling surface will be easy.

Stoves have good reflective ability. Therefore, when the unit can be mounted in the chandelier light bulbs less power. The design also has a high rate of absorption. The plates are made of natural materials that do not harm the environment and human health.

Represented large selection of accessories to the type of finish. Therefore, the installation becomes simple and fast.

Disadvantages

Suspended ceilings “Armstrong" different and certain disadvantages. Mineral boards can not withstand the flood from above. It should be borne in mind that the material is not damaged by water. However, in the event of flooding of the plate freely pass water into the room. If there is a high probability that the neighbors above can forget to turn off the water or the house has old plumbing, it is better to mount the PVC film. Stretch ceiling in this case would be preferable.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

If the room changes frequently, the temperature, the humidity, the mineral material loses its appearance. Its surface can become yellowish.

The Board does not withstand even light blows and other mechanical influences. Therefore, when installing the need to be extremely careful. Fragile material can break. Also coming in the ceiling of the tube will penetrate the mineral plate. Better to have a few extra plates that will allow you to quickly make repairs.

Device

Detailed consideration should be given to The suspended ceilings of the type "Armstrong". The frame of the metal profiles are mounted plates of a certain size.

Plates can be created from various materials. They can be hard or soft. Plates are mounted on profiles made of painted metal or plastic. They have matching holes for hanging design. They are joined together with spring locks. Wall profiles differ from the others in thickness and configuration.

Profiles can be cut on the side opposite the castle. The composition of the suspension consists of straight bars and products hook shape. The metal sheets from which the suspension are interconnected by means of a spring. It is called “butterfly”. It can help to adjust the height of the suspension.

As fasteners choose the dowels. To analyze the design, just need to lift the stove and move it to the side. After this, the Assembly is produced in reverse order.

Plate

Defined characteristics are observed plate Ceiling type "Armstrong". Dimensions finishing elements can be 60x60 cm or 120х60 see in the manufacture of plates of different materials used.

As mentioned above, the cells may be rigid or soft. In the first case the plates are made of glass, metal or mirrors. Mild varieties may be mineral or organic basis.

If the ceiling isbe mounted on rigid plates, it is necessary to use special profiles. Their design is strengthened in a special way. This will allow the ceiling for a long time not to deform, to be reliable. However, this significantly increases the cost of the finishing process.

The Mineral materials are used infrequently. Their composition is mineral wool. Organic plates are made on the basis of the paper. This is one of the most easy and inexpensive finishes. To cut such material will not be difficult, which is not the solid versions.

Specifications

Before buying the finishes must be considered Specifications ceiling type "Armstrong". Plate can have a thickness of 0.8-2.5 cm, the weight depends on the type of material.

When you select the plates you need to pay attention to the sound absorption coefficient. If it's an office open space, call center, etc., it is recommended to purchase plates with high represented increased. The room will be created with the correct acoustics.

Soundproofing plates is quite high. The bigger it is, the more expensive it will cost material. If the ceiling is planned to be installed in a humid environment, it is recommended to use water-resistant varieties. They do not absorb water, which allows the finish for a long time not to lose the aesthetic appearance.

A variety of combustible and incombustible categories of plates. The choice depends on the purpose of the premises, the existing rules safe operation.

Grid system

Suspended ceilings “Armstrong" can be installed in different ways. There are modular and solid design. The first form is more common. It consists of a modular frame. It includes panels, slats and tapes.

The Frame is often closed by plates. In some cases the protruding elements are not masked. This creates a certain visual effect in the room. Note that when you create suspended structures distance from floor to ceiling in the room is reduced more than the arrangement of the tensioning systems. But in the space formed easy to hide unseemly, communications systems, ventilation, etc.

To the base of the ceiling mounted frame of the profiles. The distance between them is 60 cm (corresponds to the size of plates). The installation is reminiscent of the Assembly of drywall systems.

Components

In the sale today presents a different Components for suspended ceilings type "Armstrong". They allow you to give the ceiling a different look.

Plates are issued with three different types of edges. The first one is called Microlook. The edge is quite narrow. It has a step configuration. Use presented cell for profiles which have a width of 1.5 cm.

The edge of the Tegular type is also characterized by stepped edges. However, these plates are mounted on a wider profile. It has a size of 2.4 cm

The Most versatile edge different plate Board. They have a smooth structure. They can be used in all types of suspension designs.

Mounting frame

To install suspended ceiling, you will need to first mount a frame. It needs to be smooth. The attachment of the profiles is performed first on the base of the wall. It is important to use a construction level. With it all over the wall, make a mark where it will be mounted profile.

Features metal frame trimmed in accordance with the size of the room. With dowels attach them to the base. Further vymirayut the exact dimensions of the carrier profile. The metal elements are cut and laid out on the floor in a grid. Then they are placed in a supporting structure. Each bar set at the appropriate place, evaluate their slack.

Next vymirayut and establish longitudinal relationships. All actions should be done after accurate measurements. The profile is cut very precisely. Otherwise the aesthetics of the ceiling will be low.

Assembling the roof

After assembling the frame, you can start laying the slabs. Each cell is raised. Then, it is tilted and is injected into the space behind the frame. Further, the plate neatly placed on the appropriate place. If the material failed to install smoothly the first time, the cell is lifted, pushing at it from below.

First you need to install concentrated loads. You can then set the Lights in the suspended ceiling of the type "Armstrong". These structural elements gather on the floor. Stove installed bulb rises. Electrical appliance connects to the wire.

The Assembly is completed with the installation of blank plates. All components must be installed exactly. If the Board stood askew, its correct. For this you need to put a little pressure on one of the corners.

Having Considered what constitutes a Suspended ceilings “Armstrong" Their features and characteristics, it is possible to choose and mount the system.