Beautiful walkway in the garden: options with photos

The light is hard to find a man who would not aspire to surround ourselves with beauty. And this applies not only at home but also the land on which the building is located. After all, we are not able to sit all day in the room, we need fresh air. But being in his yard, when not maintained and not improved, it will be nice not to every owner.

One of the important components of a beautiful area is a walkway in the garden. It can be done from a variety of materials. Examples of the best ideas we present and describe in this article. I hope that through it the reader will not have any problems with the design and decoration of a private suburban area.

The Path of cobblestones

The easiest and the original version can perform and the strong half of mankind, and beautiful. Because the technology is really basic.

What you need:

• Sand;
• Stones of different size (better to choose a more flat);
• Cement;
• Water;
• Garden watering.

To do:

1. So, to be able to walk on his beautiful plot on the bare ground and dirt, and the beautiful path in the garden, prepare the necessary materials. Their number depends on the size of the area you want to cover.
2. Then to make a mixture that are required in order for the stones securely, does not slip and does not turn, when they will be adults and jump the little kids who love playing different games.
3. To prepare the mixture you need to take one part of cement and three of the same volume of sand. Mix to a homogeneous mass. Important! Water in these components need not be added!
4. Then add the area allocated for the track, with the mixture.
5. Spread it on the stones so that they are as tightly to each other. To do this, you first need to lay the stones larger, and the gaps between them smaller. Then the path will be much more natural, as if it is made by nature, without the help of people.
6. When the process comes to an end, the path in the garden, entirely covered with stone and will turn into a real masterpiece, you need to water. Important! Not fill, and only slightly wet! You can, of course, wait for the rain. However, in this case there is a risk that a mixture of sand and cement will be diluted. In the end, will have to redo everything. Perhaps, inquisitive reader, it is unclear why bother to water the track from the watering can. Therefore, we will explain. These manipulations are necessary to the mixture, and grabbed the stones are securely entrenched in it.
7. After that you should refrain from walking on “stone way” within a few hours, even better a whole night.

Trail of pebbles

According to the instructions described above, you can make another version of the track.

What you need:

• Pebbles;
• Sand;
• Cement;
• Water and lake.

The Progress and the proportions of the mixture are not different from the technologies in the previous paragraph, just the stones are smaller, and work - kropotlivoi.

Brick lane

Another option, similar to what was described above, we consider in the current section. For its implementation we need:

• Sand;
• Cement;
• Bricks;
• The lake;
• Water.

To do:

1. To create another miracle, you should perform almost the same manipulation, referred to in the preceding paragraph. The only difference is that, spilling on the field, which will be leading to the garden path, a mixture of sand and cement must be laid on it, not stones, and bricks. That, however, it is important, otherwise the work goes down the drain.
2. The Most important rule is that the bricks need to put the smooth side up, while slightly pressing them into the mixture. Otherwise, the holes will be collected rainwater. This track is much faster destroyed.
3. In addition, the bricks should fit snugly to each other. If this condition is observed will not be to go the track will become very inconvenient.
4. After laying the eggs, we need to slightly dampen “brick path”.
5. You must Then wait a period of time to a mixture of sand and cement mix with bricks made by hand in the garden walkway is durable.

Trail of broken bricks

In Order to simulate a more natural layout, should:

1. To Use a brick, as suggested in the section above, a broken or broken.
2. Cook the mixture in the specified proportions, to scatter it in the space provided under the track. And she just throw the prepared material.
3. Level it with a rake.
4. Water.

Wooden path

For fans of all natural and most natural we have selected the following option paths in the garden (with a photo of the trail you can see below). To implement this decision in life, of course, is not very easy. But the result will justify all the work and inconvenience. However, it is important to mention: the implementation of this kind of track is recommended to pursue the man, because a woman will promocasa with her three times, or four longer.

What you need:

• Big fat cut down a tree;
• Sawing tools;
• Cement;
The
• Sand;
• Water.

To do:

1. We noted earlier that do the job the lady would be virtually impossible. Because to cut a tree for paths in the garden, you will need, as they say in such cases, a rough masculine strength. And, of course, a chain saw because a regular saw a thick wood to cut is extremely difficult. In addition, this process is quite tedious and long.
2. So, to prepare details for the calculations of the original track, you should “shred” the trunk of a tree equal (if possible) roundels.
3. Then on a familiar technology and in compliance with the previously specified proportions to prepare a mixture of sand and cement.
4. Then you need to follow the following simple steps: fill with mixture of plot for paths, to put on his wooden roundels and pour the resulting path is water.
5. As you can see in the photo, the path of the tree looks incredibly beautiful, original and natural. That's a plus. But its main drawback is that it very quickly turns into dust. It is therefore considered short-lived pleasure.

The Track of natural stone

The Following incredibly beautiful and natural variant is also easily enforced, and even people who do not have special education. In many ways, the process is much easier due to the instructions which we propose to consider next. So, to create an amazing track in the garden with his own hands, should prepare:

• Cement;
• Sand;
• Crushed;
• Flagstone or any other natural stone;
• Water;
• The lake.

To do:

1. To create a miracle, similar to what is shown in the picture above, it is necessary to act almost similar to the described method. So, the first step is to prepare a mixture of sand and cement. However, in slightly different proportions: two of the volume of the first material and one second.
2. Then sprinkle the mixture to the areas in the garden path. The width should be determined independently. However, it is important that it is quite spacious, then masonry will look perfect.
3. On Top of it without much pressure to put natural stone. Of course, it must be done so that all elements tightly to each other. Then the crushed stone is not required, but the track will look a little artificial and not original.
4. Therefore it is better to split stones by the distance to define the eye, depending on the size of the natural stone used. But to overdo it is not worth it. Best to focus on presented in the current section image.

When the creative process comes to an end, you should sprinkle the cavity between the stones with gravel. You can also take regular garden soil, which will grow grass. This will give the track a kind of desolation, abandonment and naturalness. Also, very nice small flowers planted between the stones.

The Track of natural stone and cobblestone

This fact is also very important to note. To track perfectly blended in with the rest of the ensemble of the site, it is important to do it in that style direction that dominates. Then it will look not just original, but harmoniously and, therefore, beautiful. To achieve this is not difficult. Mainly stone paths is done that way to create the impression that they are not the result of human activities. It is for this reason should be planted next to the stone paths, a variety of flowering or green plants, thus creating the illusion of a kind of abandonment, of naturalness, which has created over the years, mother nature.

Next, we propose to consider another very original version of the paths in the garden. The photo below will help you navigate on how it will eventually look like.

What to prepare:

• Natural stone such as flagstone;
• Stones of different sizes;
• Cement;
• Sand;
• The lake;
• Water.

To do:

1. First, as usual, mix the cement and sand. Proportion — 1 to 2.
2. Then sprinkle the prepared mixture over the area allocated for the path.
3. Next, spread stone and cobblestone. Like shows the picture is presented as an example above.
4. When the creative process is over, go to the most simple in execution-action — watering of the track.
5. Then leave it to dry.

Walkway covers

Thinking about how to make a track in the garden with his own hands, and what material to use, many people do not consider the one that is the cheapest. Although, if to take for a basis it will be possible to obtain unique and rather unusual path paved with lids. Perhaps some will seem like this idea strange or even ridiculous. However, people often adorn their areas so that's a bit of a strange way. So we offer our readers his.

What you'll need:

• Manyscrew caps for canning (you can use one color or different, with a pattern is better not to take — it will fade);
• Cement;
• Sand;
• The lake;
• Water.

To do:

1. This technology is extremely simple in execution. Therefore, to master it will be able not only male but also female. Even a child will cope with it. So parents should certainly take it. By the way, very lively and bright looks created in this way a winding path in the garden. And to make it, no need to pick up and beat the joints — covers round in fact.
2. So, the first step is to mix the sand and cement. Here, however, the ratio will again be different — one volume of the first component and the same second.
3. Cooked mixture sprinkle the area allocated for the path.
4. Then put on his cap.
5. Pour water from the watering can.
6. Allow the mixture to dry and set, leaving for a day.

Path of glass

If the reader wants to create something truly original, something that will not be exact no one in the County, he should pay attention to proposed in the current section the idea.

To put it into practice, you need to make a bit of diligence, and to prepare the necessary material. In this case the following:

• A variety of glass bottles (of different or same size);
• Liquid nail Polish remover;
• A strong thread;
• A bowl of cold water;
• Matches;
• Sand;
• Cement;
• Water;
• Lake.

To do:

1. Perhaps the set need to perform the cheap paths in the garden materials seem odd. But then we'll explain everything and keep the process a secret.
2. So, first, you should decide the place where will pass our ‘glass path”.
3. Then, prepare a mixture of sand and cement (ratio — 1:1).
4. It to Fill the selected area.
5. Then move on to the most complex, but incredibly interesting and even magical process. For his performance, take the prepared thread, cut the right for the girth of the bottle length and soaked in a liquid varnish remover for a couple minutes.
6. Pulls the thread closer to the bottom of the bottle (the reader should determine the height by yourself).
7. And set the thread in several places.
8. Seconds it burns out. And we need to immediately put the bottle in a bowl of cold water.
9. Took it out and lightly hit on the line of combustion. As a result, in the hands of we will remain at the bottom of the bottle. It is necessary for us to upload glass paths in the garden. The length of the trail may be not very large. All depends on the amount of the main material.

The path of the “leaves”

Another wonderful idea is also quite simple in execution, however, the preparatory stage will take a lot of time. But as a result we get a truly original track that will decorate any area.

What you'll need:

• Water;
• Cement;
• Oilcloth;
• The truth;
• Several large leaves of plants (for example, fit a normal mug).

To do:

1. It is not necessary to use for building paths in the garden material purchased. Much more interesting, and maybe less expensive to do it yourself. On its own, so to speak, project. To implement this idea in advance to prepare the cement slurry.
2. Get it pretty easy. Just need to mix water and cement in the ratio of 1:1. Stir thoroughly and use immediately. Otherwise it will harden or dry out completely.
3. Then you want to make a flat surface on which we will perform our parts with an oilcloth.
4. Then spread over the part of the cement mass. Depending on how thick you want to make “leaves” to track.
5. And put the prepared sheets. The side with the convex streaks down.
6. Trim with a knife the solution outside of the sheet.
7. Remove "stencil" and leave the mixture to dry completely.
8. Then sprinkle the track with cement and sand in the ratio 3:1. And put it on the finished part. Believe me, make a track in the garden according to the instructions described above is not as difficult as it might seem at first glance. But the surprise of the guests is not the limit!