The Head of any enterprise, regardless of scope, dreams of profit grew, and production costs remained unchanged. To achieve such a result helps the system "5S" in manufacturing (in the English version 5S), based only on the rational use of internal resources.
To create this system from scratch. Something like that back in the late nineteenth century proposed by the American Frederick Taylor. In Russia we have engaged the scientist, the revolutionary, the philosopher and ideologist, A. A. Bogdanov, who published in 1911 a book about the principles of scientific management. On the basis of the stated provisions in the USSR was implemented the MUSIC, that is the scientific organization of labor. But the most advanced was proposed by the Japanese engineer Taiichi Ohno and implemented them at the factory Toyota Motor, the system "5S" in production. What is it, and why the Japanese system has become so popular?
The fact that it is based on the simple principle that does not require cost. It is every employee from the cleaners to the Director, who needs to optimize their part in the overall workflow. This leads to an increase in profits of the production as a whole and to growth of the income of all its employees. Now the baton of the implementation of the system "5S" picked up businesses around the world, including Russia. In this article we will try to convince skeptics that the Japanese know-how really works with absolutely any sphere of activity.
International 5S stands for the five steps (“step” in English step). Some economists and advocates of the new attitude toward work explain the name of five Japanese principles, consistently implementing the 5S system: seiri, seiton, seiso, seiketsu and shitsuke. For us, closer and clearer to our family "5S" - five consecutive steps that must be performed to achieve the prosperity of their production. This:
1. Sorting.
2. Compliance with the order.
3. The contents in purity.
4. Standardization.
5. Improvement.
As you can see, anything supernatural system "5S" in manufacturing is not required. Perhaps that is why it is possible to meet distrust and superficiality.
The Wise Japanese Taiichi Ohno, which, thanks to the introduction of the plant for the production of «Toyota» our own methods, was able to rise from engineer to CEO, drew attention to how much loss occurs due to various inconsistencies and overlap. For example, the conveyor is not delivered in time some small screws, and as a result fell all production. Or Vice versa, details filed with reserve, they proved to be unnecessary, and as a result someone from the staff had to take them back to the warehouse, and then to spend in empty work of its time. Taiichi Ohno developed the concept, which he called “just in time”. That is, the pipeline is now supplied as much detail as you need.
It is Possible to result and other examples. The system of "5S" in production also included the concept of "Kanban" in Japanese means "advertising sign". Taiichi Ohno suggested for each part or tool to hang the tag of the so-called "Kanban" in which were given all the necessary information on the part or tool. In principle, it is applicable to anything. For example, to commodities, medical supplies, folders, office. The third concept, which is based on a system of "5S" in manufacturing, is the concept of ‘Kaizen", meaning continuous improvement. Invent other concepts that came up only for highly specialized production processes. In this article we will not be considered. In the end, all proven innovations, and formed the 5 steps are applicable to any production. Let us examine them in detail.
Many of us on desktops accumulate objects that, in principle, not needed. For example, the old forms not used files, drafts, calculations, napkin, on which stood a Cup of coffee. And amidst this chaos can be necessary files or documents. The General principles of "5S" refers to optimize your workflow, that is to make sure not to spend time searching among the rubble of things unnecessary. This is the sort. That is, in the workplace (near a machine at the table, in the Studio – anywhere) all the items are put into two piles – necessary and unnecessary, which is necessary to get rid of. Then all you need is decomposed into the following piles:"is used frequently and constantly”, “is rarely used”, “hardly used". The sorting is done.
If you just sort out the items, nothing will. Need these items (tools, documents) to expand in order to be used constantly and often found himself on the mind or so that it can be quick and easy to put back. That is rarely used, it is possible to send somewhere in the box, but it is necessary to attach the tag "Kanban", in order to in time could easily and accurately find it. As you can see, the system "5S" workplace starts with the most basic steps, but it is very effective. And in addition, it improves mood and the desire to work.
The third step is for many the most logical. To keep clean we are taught from childhood. In the production it is also necessary, and must be clean not only the tables of office workers or cabinets in catering establishments, but also machines, utility rooms cleaners. In Japan, employees cherish their jobs, three times a day to remove them – the morning before work, at lunchtime and in the evening, after a busy day. In addition, they have companies introduced a special labeling plots, allowing you to comply with the production order, that is, with different colors marked areas of finished products, warehousing of certain details, and so on.
The Principles of standardization invented by Taiichi Ohno. Widely use them for 5S. Management of production, due to standardization, gets a great monitoring tool for all processes. The fast eliminates the causes of delays and errors are corrected, leading to production of defective products. At the factory Toyota Motor standardization was as follows: the master was daily work plans, in jobs posted exact instructions at the end of the working day and special workers check which is the day occurred deviations from plan and why. This is the basic rule of standardization, that is, exact instructions, work plans and monitoring their implementation. Now in many enterprises, for example, factories ENSTO Estonia, introduced a bonus system of employees, clearly contravened the provisions of the system "5S" and based on this improve their performance, which is a great incentive to adopt this system as a way of life.
The Fifth step, which completes the system of "5S" in manufacturing, based on the concept of Kaizen. It means that all employees, regardless of position, should strive to improve the process of work on their assigned plot. The philosophical essence of Kaizen is that all of our lives each day gets better, and if work – it's part of life, it also needs to stay away from improvements.
Field of activity there are wide, because of the limits of perfection does not exist. According to the concepts of the Japanese workers themselves must want to improve your production process, without guidance and constraints. Now many organizations are created teams of workers, monitors the quality of products, learning its positive experience of others, helps to achieve perfection.img alt="5s system in Russia on manufacture" height="347" src="/images/2018-Apr/03/ebc6450082b0280b6eda2d76e8e0a076/6.jpg" width="451" />
To the system "5S" started to work, not to organize or to hire employees that will force his colleagues to implement it. It is important to make people aware of the usefulness of this innovation and adopted it as a lifestyle. The implementation of "5S" in Russia, the production is facing difficulties due to the fact that our Russian mentality is different from Japanese. For many of our productions are characterized by the following:
1. Workers, especially if they have no incentive not seek to increase profits. They ask, why try to make the boss even richer, if he's all there.
2. Managers themselves are not interested in the implementation of the "5S" because they do not see it as appropriate.
3. A Directive, ‘coiled on top”, used to do just for “tick”. In Japan, there is a very different attitude to their work. For example, Taiichi Ohno, introducing the system "5S", was not thinking about personal benefit but the benefit of the company in which he was only an engineer.
4. In many enterprises introduced by force a system of "5S". Lean manufacturing that involves elimination of waste of all types (working time, raw materials, good employees, motivation and other indicators), it does not work, because the workers start tosubconsciously resist innovation, which ultimately makes all the efforts to zero.
5. Managers, implementing the system, do not fully understand its essence, which leads to disruptions in established production processes.
6. Standardization often develops into a bureaucracy, a good deal cluttered with instructions and directives, which only impede the work.
The Russians, who introduced "5S" in manufacturing, the reviews for this innovation is left very ambiguous. Note the advantages:
Note the disadvantages:
Article in other languages:
AR: https://tostpost.com/ar/business/21853-5s.html
JA: https://tostpost.com/ja/business/21441-5s.html
PL: https://tostpost.com/pl/biznes/41460-system-5s-na-produkcji-opis-funkcje-zasady-i-opinie.html
Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."
Related News
Apparatus for donning Shoe covers with coin slot
the Apparatus for donning Shoe covers allows you to solve a number of tasks to keep the purity in the institution of patients with limitations in movement from pain and prolong the service life of shoes.Why you need Shoe coversOve...
The Zasyadko Mine. The accident at the Zasyadko mine
the Zasyadko mine – one of the largest coal mines in Ukraine. Located on the territory of the unrecognized DND. In the early 2000s, coal production at this mine was about four million tons. But it is known worldwide, this co...
A mobile crane boom: description, technical specifications and types
For mechanization of loading and unloading, filing structures and materials in construction projects, as well as to maintain the elements in their consolidation used crane boom – transport hoisting machine, which hoisting de...
Improvement - what's that? Features and application areas
Improve – it is a process aimed at continuous improvement. Depending on what field referred to, this concept may involve various characteristics and parameters. In recent times it has become fashionable and popular to improv...
What is the ZIP code? Definition and history
Often foreign websites with user registration, requesting a ZIP code. How to decipher the abbreviation, not everyone knows. What is the ZIP code? How he came and for what reasons? About this we and tell in our article.What is the ...
Anti-personnel mine mon-50: installation methods, features and reviews
To counter the maneuver and the advancement of enemy forces on land are widely used minefields – artificial barriers erected in advance or directly before the fighting with the aim of causing maximum damage to the enemy manp...
Comments (0)
This article has no comment, be the first!