How does the front silent blocks of front levers

Hob is one of the components of the suspension. And though its size and design make it impossible to associate it with any overarching element, such as a piston, he still can affect driving safety, and very serious. We will talk about one of the varieties of these devices, namely silentblock front levers.

What they are?

Front bushings front levers are not fundamentally different from their “brothers”, which are installed on the stabilizers and shock absorbers. They all have the same design and represent a small rubber hinge, which consists of two metal sleeves between which is placed a rubber spacer.

Functions

Serve front silent blocks of front levers for the connection of suspension parts. Thanks to the inserts between the steel bushings front bushings front levers dampen vibrations transmitted from one unit to another. Thus, we see that this detail plays a significant role in the car. By the way, the bushings have the lion's share of bumps and vibrations that are transmitted due to the collision of the car on the bump.

Period of operation

As a rule, the front silent blocks of front levers can operate normally for 70 to 100 thousand kilometers. However, if they are to be subjected to a high load (for example, if the car ever goes on the pits), it will serve not less than 40 thousand kilometers. To determine the serviceable condition of the part in two ways:

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

• Visually. In this case, check the condition of inserts – if you have rubber separation, such a detail is changed to a new one.
• A HUNDRED. Here is a complete diagnosis of suspension and then the decision on what measures need to be taken.

To determine the current state of silent blocks on the ear. When hitting the car on the bump you will hear a loud distinctive sound, similar to the friction of the rubber on some detail (slight creaking).

And finally, a few points about how you are replacing the front arm bushings:

• First, remove the wheel from the side from which the bushing squeaks.
• Cleaned the thread of mounting bolts ball and lever.
• Unscrew and remove the fasteners lever.
• The ball is brought Jack and lift up the front suspension. After the Jack is lowered in order to pull the ball from the suspension knuckle. He usually comes out without much effort.
• Using the puller housing is pressed the old bushing, and pressed in. new.
• Mounted the lever back and tighten all bolts.

All at this stage, the replacement of silent blocks will be complete. As you can see, the process is not so difficult to go for help to the professionals at a HUNDRED.

Take care of your car and remember that failure to replace the suspension bushes fraught with not only the constant creaking in the cabin, but a number of other unpleasant consequences, such as uneven tire wear and loss of controllability of the car.