As you are replacing the wheel bearing "Chevrolet-Niva"

Chevrolet has gained much prevalence due to the excellent permeability and the possibility of operation in difficult terrain. Wheel bearings "Niva-Chevrolet", the price of which is in the range of 1000 rubles for the kit are some of the main parts of running system. They are located on each wheel and are necessary to ensure freedom of movement, smooth movement and reduce friction.

When need to install new item

Replacing the wheel bearing "Chevrolet-Niva" is made in the case that the position of the wheel during the movement changed. It causes premature abrasion of the rubber, in addition, if the integrity of the parts will be broken during the drive, there is the possibility of jamming and stopping of the wheel, which can lead to unpleasant consequences. Given the fact that the operation of the vehicle is in a challenging environment, contributing to the increasing burden on the suspension, replacing the wheel bearing "Chevrolet-Niva" should be implemented in a timely manner, not only in the event of a breakdown, but when you reach the mileage values specified by the manufacturer.

What you need to pay attention

There are a number of signs indicating that the failed hub. “Niva-Chevrolet” may operate differently, it is also worth noting other symptoms:

• The trajectory of the machine in motion. This is because the damaged bearing lock the wheel. The same thing happens when poor-quality carrying out of alignment.
• Vibrations. They appear in the case of serious wear and feel in the steering wheel and in the body. This characteristic cannot be ignored, as it indicates a high probability of jamming of the hub.
• Specific noises that are noticeable even inside the cabin. The crunch occurs due to the movement of the balls broken bearing.

If you experience any symptom should replace the rear or front wheel bearings "Niva-Chevrolet", depending on which elements are out of order. This process will not cause difficulties even for the inexperienced motorist, as in this case there is no need for special tools and special knowledge.

Recommended

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Selecting new items

The Main factor when choosing a new bearing be the likely operating conditions of the machine. If the movement is mainly carried out on urban roads, can restrict the part made Volga automobile plant. For regular driving on rough terrain and in difficult road conditions the best option would be the element with high strength, which can be found in Italian and German manufacturers.

It is Worth noting that the new vehicle is bearing with double row roller design that requires no adjustment and additional application of lubricants.

Dismantling

To get full access to the wheels, it is necessary to raise the vehicle. If you need a replacement wheel bearing "Chevrolet Niva" on the front wheel, it must be fully raised and the front part of the car on both sides, to prevent the pressure of the stabilizer and to simplify the work. Next you need to follow the following sequence of actions:

• Set the stops.
• Removed the wheel then removed the hub cap using a screwdriver.
• Wheel nut scrolls and attenuated. If the part is tightened too tight, you can use scrap pipe as a lever.
• Flat screwdriver, unclench pads.
• Twist strap mounting caliper, and the element rises and is fixed to the spring with wire. This is necessary for unloading the brake hose.
• Removed the brake disc.
• From steering lever housing is pressed by the finger. Pre-marked the location of the adjustment screw rod. Then craving turns to the other side.
• Loosened the clamps the steering knuckle.
• Twist the hub nut and remove the support washer.
• Removed the CV joint From the knuckle with the hub.
• The Fist is tightly fixed in the Vice, and then extruded hub. “Niva-Chevrolet” Has a reliable suspension system, in spite of this, you need to exercise caution.
• Using the puller removed the snap rings and bearing.

Add new parts

The Inner surface of all elements must be thoroughly cleaned from dirt and dust. The retaining ring is lubricated, and mounted into a fist. Further a fixed bearing, to act very carefully as a press-fit with excessive force will lead to the destruction of its design.

After mounting the inner ring is mounted to the hub. In reverse order, gather all the remaining elements.

Replacing the wheel bearing "Chevrolet-Niva" must be based on some parts. For example, the adjustment bolt is fixed in accordance with the marks applied during its removal. The locking and tightening of the wheel nutscarried out after removing the car from the Jack.