Heated rear seats: installation instructions

Date:

2020-02-08 04:20:17

Views:

549

Rating:

1Like 0Dislike

Share:

Table of contents:

The Winters in our country can be very frosty. In the car it can be very cold. Do not save even included a stove. Expensive cars for that reason are available with heated seats. A budget model such functions do not have. However, the owners of such vehicles can mount the system yourself.

Most Often, Parking is provided only in the front seats. For passengers behind the driver to ride in the car in cold weather can be uncomfortable. Therefore, there are many systems that can be used for Heated rear seats. Simply to install yourself.

Varieties

Passenger car, SUV or a Crossover with heated rear seats today, you can find often enough. In this case the owners of such vehicles can choose different options of electrical systems. Inside such products are the heating wires.heated rear seats

In the market of special products for cars are covers, capes heated and embedded systems. The first two type of products they are low cost and easy to install. However, these species are not devoid of certain shortcomings.

Many drivers prefer to install an embedded system. Their installation is more complex. However, it can almost every own. In garages, this procedure will cost a lot. With all the complexity of installation of the heating wires under the surface of the seats, this is one of the most preferred.

Select the type of heating

The Overhead cover and cushion heated are quite inexpensive. You can purchase such products at a price of 500 RUB. However, it should immediately realize several of the nuances associated with their use.

First and foremost, experts say that the quality of these capes mostly inferior to the embedded wires. Thus the heating of this product may not meet the established standards. Some manufacturers produce covers for the seats, which are heated to 40 ºC. This has a negative impact on the reproductive function of men.

Heated rear seats auto with the help of overhead covers has another flaw. These products connect to the network via the cigarette lighter. It is known to be in the car in just one. Therefore, such a product suggests that the case can be applied only for the driver's seat. Heated rear seats in this case is impossible. Using a splitter, you can expect a failure of the fuse. It will carry too much current. Therefore, an embedded system for the rear seats are preferable.

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Cost

All of our in-house embedded system for heating the rear seats can be divided into three categories. The most expensive is the product of German production. The most famous system in this category is the Weaco. Recessed kit heating for 2 seats costs about 16 thousand.Installation of heated rear seats

In the mid-price category included domestic production. The greatest demand is for systems Heated seats “floor”, ‘Usual”, “Autoarm”, etc. These kits can be purchased for the price of 2 seat about 4 thousand.

Is the cheapest products in China. These products can be purchased at a price up to 3 thousand rubles for 2 seats. Found products, the cost of which does not exceed 1.5 thousand rubles for the kit. The quality of the products is significantly different. To choose a decent option, it is necessary to consider the opinions of experts.

How to choose the heated seats?

On the market there are many systems built-in heating. They differ in quality, cost. The most expensive and high quality are the electric systems of German production. It is a versatile product that can be used for heated seats in almost any car brand. Degree of protection of electric wires are very high. Failure within a specified period of operation is unlikely.

Domestic manufacturers are on the market special products many varieties of such systems. The greatest demand among buyers enjoy Seat heater “floor”. heating of the seats EmelyaSome Experts argue that Russian products are not inferior in quality to German products. But the cost of domestic systems will be much less.

Chinese products for heated seats differ the least cost. They have a low degree of protection. Wires are easy to damage. They can fail in the first year of operation. It is possible system overheating and even fire. Such systems are buying is not recommended.

Preparation

Selecting the best option, embedded systems, must be carefully considered Manual heated rear seats, which comes with the product. The manufacturer specifies a number of mandatory requirements that the installer should perform.heated rear seats auto

Next, you need to inspect your vehicle. Amodern models of vehicles have integrated heating system. However, the manufacturers stipulate that the owner wants to install a similar product on their own. Therefore, the car can have all the necessary conclusions and wires to connect. This will greatly facilitate the installation.

Next you need to determine the quantity of materials required for installation heating. You need to prepare the wire, Scotch tape, duct tape, knife, screwdriver and scissors. Also recommended to take a pair of pliers and glue. You can then proceed to begin the installation.

Choosing the location of the button

With Button heated rear seats you can turn on and off the system. The button can be set in a user-friendly place.Button heated rear seats

Most Often, such a control is installed on the armrest of the rear seats. It is very convenient. However, in some car models, the armrests for the rear seats is not provided. Therefore, the car owner can buy their own. A variety of products, which has holes for installation of the button of the heating system. In the conventional armrest will have to make a seat for themselves.

In some cases, the driver is more convenient to position the button on the dashboard. In this case, it is convenient to independently operate the system, including on and off when required.

Transaction

Heated rear seats with their hands involves the installation of wiring. The location of the communications must be carefully considered. They should not interfere with the passengers and driver. Also a large number of improper wiring may spoil the look of the cabin.heated rear seats embedded

Communications should be routed so that they can be hidden under various elements of construction. If they get in the way, wire is easy to break. It is unsafe. Moreover, the system will stop working and will require timely repair, and the possibility exists to shock.

A Large number of wires in the cabin can interfere with the driver to operate the vehicle. Therefore, all communications should be as hidden.

The wiring to the network

Embedded heated rear seats Require a correct connection. Before beginning this procedure, you must once again read the manufacturer's manual. It clearly States the correct way to connect wire to the network.

Many drivers make a huge error, by connecting the system to the cigarette lighter. In this case, to operate the heated seats would be impossible. The fuse is not designed for this load. So it will quickly fail.

It is best to connect the wires directly to the vehicle battery. It is necessary to calculate the total load, which will be determined in the system in the winter. In some cases you will have to sacrifice in favor of some other heating systems (e.g., music).

The removal Procedure

To assemble Heated rear seats 'll need to dismantle the rear seats. This is a rather laborious process. Those who have never done such an operation can be difficult. It was at this stage of the installation of the heating usually takes a long time.heated rear seats with their hands

When the rear seats are extracted from the salon, you will need to gently remove them from the upholstery. This must be done very carefully. Otherwise you can damage the material. In this case you will need to buy new covers on the chair.

You can then proceed to install the system. Experts advise to choose these kinds of heating is not turned on unless the chair no one sits. This allows you to operate the car's electrical system better.

Installation

After all the preparatory work can start to The installation of heated rear seats. Wire will be located on the backrest and on the seat. Supplied manufacturer often requires the presence of glue or adhesive tape. With their help, you can fix the system on the surface. In some products, for heating provided by the presence of the adhesive base. In this case, the installation is even easier.

The Installation of the wires is carried out in a warm room. If you ignore this recommendation, you can expect that the glue will not be able to provide the required adhesion of the Mat to the ground.

After the heating elements are securely fixed on the surface, you need to put the padding on the seat. After this the chair again set in the interior of the vehicle. You need to check the performance of the system. When all the wires are connected, you need to run the heater. Experts recommend to include in the network fuses. This increases the safety of operation of the system.

Operation properties

Heated rear seats You can often adjust. To do this, the system has a thermostat. It disables the supply of electricity at a time when the seat will heat to the set temperature. Also, in some products calls for the implementation of heat only the backs or the seats. Also, the manufacturer may provide a test function in thethe state of the wires. When they open sensor signals the driver of the problem.

Having Considered the features of the Heated rear seats you can mount such a system.


Article in other languages:

AR: https://tostpost.com/ar/cars/21016-heated-rear-seats-installation-instructions.html

BE: https://tostpost.com/be/a-tamab-l/38561-padagre-zadn-h-syadzennya-nstrukcyya-pa-stano-cy.html

DE: https://tostpost.com/de/autos/38145-beheizbare-r-cksitze-einbauanleitung.html

ES: https://tostpost.com/es/coches/37924-la-calefaccin-de-los-asientos-traseros-instrucciones-de-instalaci-n.html

HI: https://tostpost.com/hi/cars/22627-heated-rear-seats-installation-instructions.html

JA: https://tostpost.com/ja/cars/20616-heated-rear-seats-installation-instructions.html

KK: https://tostpost.com/kk/avtomobil-der/38971-art-y-otyr-yshtardy-zhylytu-ornatu-boyynsha-n-s-auly.html

PL: https://tostpost.com/pl/samochody/40585-podgrzewanie-tylnych-siedze-instrukcja-instalacji.html

PT: https://tostpost.com/pt/carros/40256-dianteiros-instru-es-de-instala-o.html

TR: https://tostpost.com/tr/arabalar/35448-is-tmal-arka-koltuklar-kurulum-talimatlar.html

UK: https://tostpost.com/uk/avtomob-l/39379-p-d-gr-v-zadn-h-sid-n-nstrukc-ya-po-ustanovc.html

ZH: https://tostpost.com/zh/cars/19566-heated-rear-seats-installation-instructions.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

"Mobil motors" Moscow: reviews, services

Moscow is full of car dealerships. One of them – is “mobile motors». It exists quite a long time and has already become popular.In the showroom you can buy model cars from both domestic and foreign producers. Her...

Repair the bumper with his own hands. A few simple recommendations

Repair the bumper with his own hands. A few simple recommendations

it would Seem, why we need to repair the bumper, and especially to give money for it, if it has no effect on the drive. It should be done for several reasons. First, the bumpers need to protect the car during an accident. Secondly...

Engine D-240: specifications and price

Engine D-240: specifications and price

One of the most common wheeled tractors in the Soviet Union was MTZ-80, produced by Minsk tractor plant from 1974. The successful design of machines and huge scope for modernization allow the tractor to remain competitive in the 2...

How to tune the hood with your hands?

How to tune the hood with your hands?

appearance of domestic cars, and some cars is not attractive and stylish, so many motorists wish to give a spectacular appearance with your own hands. There are numerous ways that allows you to select a car from millions. External...

Engine

Engine "Daewoo Matiz", design and features

three-cylinder petrol engine “Daewoo Matiz” series F8CV is a licensed and modified version of the motor "Suzuki" created in the early 90-ies to equip compact cars company. Version «Mercedes» motor...