The best grease for brake cylinders

Date:

2018-03-19 13:11:04

Views:

557

Rating:

1Like 0Dislike

Share:

Table of contents:

All systems of the vehicle during its operation shall be in working order. But special attention should be paid to the brakes. Indeed, often the life of the driver, passengers, other road users and pedestrians depends on the state of the brake system of the car. Periodically it should be serviced. This is to replace the brake pads, discs, fluid, and calipers. For example, lubricant for brake cylinders during maintenance and replacement just need. All this and we'll talk.grease for brake cylinders

Lubrication of carriage guides

Before proceeding directly to the cylinder, it is necessary to understand his guide. Brake system during operation, emits large amounts of heat. This lead to the fact that connections are often stuck tightly. This also applies to the guides that are starting to podklinivat. This is not good because it can lead to serious consequences. The jam helps to ensure that pads are constantly pressed to the disk. This leads to significant overheating of the system. In the result, the pads are burning, wheels are crooked. And the tire in such conditions it can easily catch fire. That's why when you service the caliper guide must be processed with special grease. What we will deal in this article.

Properties of the lubricant to the cylinders and guides

As the node refers to heavy-duty and in the process heats up to 300 degrees Celsius, and with the aggressive drive and later, then the approach should be appropriate. Grease for brake cylinders must have the following characteristics:

  • Operating temperature 150 degrees Celsius and above;
  • Resistance to aggressive environment (salt, reagents);
  • The minimum change in viscosity with increasing temperature.grease for brake cylinders and calipers

Based on the above parameters, should be chosen grease for brake cylinders and guides. Luckily, at the moment the range is simply huge, so labour should arise.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

Copper grease for brake cylinders and calipers

It is the most common and popular among motorists. High temperature is not afraid and is inexpensive that makes it so popular. Most often used for processing disks, brake pads and also brackets and other brake components. It is worth noting that to apply copper grease to the back side of the product. If it's the pads, the front side must not be covered by any lubricant, this also applies to disk.

The Process of applying the paste is also very simple. For this the surface is cleaned of dirt and corrosion. Then with a brush apply the grease evenly across the surface. It should be noted that it is sold in cans, in this case, it is necessary to spray, after reading the instructions for use.grease under the dust boot brake cylinder

The basis for high temperature greases

On the shelves of auto shops currently just a huge selection. But if you look, there are only 3 broad groups:

  • Mineral based;
  • Synthetic basis;
  • Mineral or synthetic base containing small amounts of metals.

If you understand how it's supposed to be grease under the dust boot brake cylinder, the best suited one that is made with synthetic base. This is because it is neutral to rubber and plastic products. Consequently, dust does not corrode and is suitable for processing the brake piston or carriage guides. Used basis provides a number of advantages, such as low volatility, high temperature threshold, insolubility in water and other liquids. Overall a great choice, though not always budget.

Where is cheaper grease for pistons of the brake cylinders on a mineral basis. But still it is better suited for guides, as they are able to withstand temperatures from -45 to +180 degrees Celsius.

Lubrication with the addition of ceramic particles

A Relatively new development, which has already managed to gain popularity. Is not cheap, but the benefits are very encouraging. The performance of the lubricant is achieved by the presence in the ceramics composition of fine fraction. At the moment it is one of the best methods for protecting the brake cylinders and their seats from corrosion. In addition, the processed nodes exclude the possibility of extreme temperatures, dirt and dust on the surface.lubrication of rear brake cylinders

Despite the high cost of such products, it is extremely popular among motorists. Can be used as a lubricant rear brake cylinders, which are less loaded compared to the front. Among the most popular manufacturers of high quality boasts a firm "LIQUI Moly". Well now go ahead and consider a few very important points.

How is the service brake system?

The Often complex grease is recommended when replacing brake pads or brake discs. There is nothing complicated. Primarily, the inspected condition of the guides. Clean the fingers and seats are of rust and treated with a certain amount of lubricant. Suitable copper, graphite, etc. as for the piston, the lubricant needs to reduce friction and protect from corrosion. The surface of the part is desirable to handle a small amount of ceramic grease. It effectively protects the surface from rust.

Very important detail is that worth to regularly check the condition of the boot. If it is torn, no grease will not help. First you need to replace the rubber seal and then lay the grease. In addition, it should not be too much, as starts to squeeze through the anthers and cuffs, which is not good.

Expert Tips

Many experts recommend not to save on lubricants for the calipers and only buy proven products. For example, the optimum grease for pistons of the brake cylinders based on silicone. It is completely safe to anthers and is high temperature. Hence works effectively for both winter and summer.lubrication for pistons of brake cylindersService technicians often do not fulfill their duties. For example, when replacing the pads should clear the calipers and guides, but no one does. Therefore it is better to do it on their own, especially as there is nothing complicated and will cope even novice users. Do not neglect the maintenance of the braking system, but also to look back every 500 kilometers doesn't make sense either. Inspect everything while replacing the brake pads.

What grease should I pack?

It is Desirable to use different types of grease depending on the workpiece. For example, to the carriage guides are ideal graphite lubricant. It is inexpensive and withstands high temperatures. Protects metal products from corrosion and prevents welding. One of the most affordable options - the products of the company TRW.

Optimal lubricant for the pistons of the brake cylinders should be silicone or ceramic based. The best manufacturer in this regard - Febi. Cheap and cheerful. But protivosemnye Liqui Moly is not recommended for laying under the dust boot of the piston, as it can cause the rubber seals.grease dust caps brake cylinders

Protivosemnye pasta perfect for processing brake plate and holding bracket. Usually, this usage ends. Remember that cuff lubrication of the brake cylinder should not be run pasta that eat away at rubber seals. This can lead to the complete destruction of the piston and the caliper.

To Summarize

As you can see, there is nothing difficult in the service brake system of a vehicle. But at the same time, it is important to regularly lubricate all the elements of the caliper, which operate at high temperatures. Note the anthers of the guide fingers. They are also exposed to wear, resulting in a rather nasty knock on the bumps. This happens due to the fact that the finger hangs freely in the seat and held by a plastic grommet.

As for lubricants, it is currently just a huge number. Any paste for lubrication of brake cylinders, if it is designed, is suitable for use. It is not recommended to lubricate parts of the brake system is simple with motor oil or grease, etc. All this will not lead to anything good.lubrication cuffs brake cylinder

Many of the details of the brake system with proper maintenance can serve 200-300 thousand miles or more, it concerns the calipers, guides, pistons, etc. Pads and rotors is more a consumable, but for them also it is advisable to look. All this will allow you to more confident feel behind the wheel and know exactly what the brakes are exposed to large...


Article in other languages:

AR: https://tostpost.com/ar/cars/11893-the-best-grease-for-brake-cylinders.html

BE: https://tostpost.com/be/a-tamab-l/21282-lepshaya-zmazka-dlya-tarmaznyh-cyl-ndra.html

DE: https://tostpost.com/de/autos/21291-beste-schmierung-f-r-bremszylinder.html

ES: https://tostpost.com/es/coches/21307-el-mejor-lubricante-para-cilindros-de-freno.html

HI: https://tostpost.com/hi/cars/11901-the-best-grease-for-brake-cylinders.html

JA: https://tostpost.com/ja/cars/11903-the-best-grease-for-brake-cylinders.html

KK: https://tostpost.com/kk/avtomobil-der/21270-zd-k-maylau-sh-n-tezheg-sh-cilindr.html

PL: https://tostpost.com/pl/samochody/21242-najlepszy-smar-do-cylindr-w-hamulcowych.html

PT: https://tostpost.com/pt/carros/21240-o-melhor-lubrificante-para-sistema-de-freio-de-cilindro.html

TR: https://tostpost.com/tr/arabalar/21278-en-iyi-ya-lama-i-in-fren-silindir.html

UK: https://tostpost.com/uk/avtomob-l/21263-krascha-mastilo-dlya-gal-m-vnih-cil-ndr-v.html

ZH: https://tostpost.com/zh/cars/12643-the-best-grease-for-brake-cylinders.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Four-wheel drive ATV

Four-wheel drive ATV "Tarus": overview, specifications and reviews

Not so long ago was presented and launched on the market original ATV “Tarus” of domestic production. The number of instances is several tens, the planned market expansion and an increase in serial production. Two-whee...

BMW 535i (F10): specifications, reviews, photos

BMW 535i (F10): specifications, reviews, photos

BMW 535i - the latest and most technologically advanced version of a popular Bavarian sedan. Model with a long history with each release and restyling is becoming more and more similar to the ideal design point of view and the tec...

Than flush the heater radiator of the car at home

Than flush the heater radiator of the car at home

the Heater performs the function of a kind of stove feeding warm air into the vehicle interior. And if in a warm season it is almost never used in the winter without it not to manage. Work the stove not only provides comfort for t...

"Volkswagen Lupo": a tiny car with a female character

According to the official classification, road transport is conventionally divided into categories according to different criteria. These include the body type, type and engine size, functional purpose, and so on. The division by ...

Ford Fiesta: reliable family car class

Ford Fiesta: reliable family car class

In 1982, the automotive market has a new family vehicle class Ford Fiesta. The model replaced the car "Ford Taunus", which was produced from 1948 to 1982 in a variety of modifications, large and small series. Project "Ford Sierra"...

Review of tires Bridgestone Potenza RE002 Adrenalin. Reviews and test results

Review of tires Bridgestone Potenza RE002 Adrenalin. Reviews and test results

the First model in the line Potenza Japanese manufacturer Bridgestone appeared in 1979. Even then, the tires were intended for the active drive. Owners of sports cars are actively buying these tires for a short time formed a very ...