Anti-corrosion treatment of underbody

Date:

2018-03-19 23:06:14

Views:

718

Rating:

1Like 0Dislike

Share:

Table of contents:

Every car eventually gets old, because the metal tends to wear out. Of course, the owners are trying to extend the lifetime of your equipment. One of such methods is the anti-corrosion treatment of the bottom of the machine. To make it in to the mechanic or their hands.

Corrosion

anti-corrosion treatment of underbodyCorrosion of metal – this is an inevitable process. Over time, the body of the vehicle appear rusty spots, which gradually turn into holes. They reduced the strength of the structure, and there can be distortions. This situation is very dangerous and can cause accidents. To avoid this, apply anti-corrosion treatment of the bottom.

Corrosion of metal in the car is of several types:

  • Gas (destroyed muffler, valve angle in the combustion chamber, exhaust pipe).
  • Corrosion in the electrolyte (accumulation of moisture).
  • Nonelectrolyte (the destruction of the oil and fuel systems).
  • Contact corrosion (where contact of different metals).
  • Slit (accumulating moisture in the clearance leads to the disintegration of metal).
  • Corrosion occurring under stress (the destruction of surfaces under high voltage).
  • The friction.
  • Atmospheric corrosion (the destruction of metal under the influence of weather conditions during storage and operation of the vehicle).
  • Mechanical (damage to the underbody of the car from impacts of gravel and pebbles).

The Most prone to corrosion parts of car

anti-corrosion treatment of underbodyMost of it is corroded and the bottom sills of the car. Riding on the road, the high street leads to abrasion of the protective layer. Small stones hitting the underbody, creating on the metal damage that will eventually begin to rust. Therefore it is so important to do maintenance work, which should be included anticorrosive processing of the bottom of the car.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

From the dissolution of the metal also affects the piping, crossmember and frame. If you do not treat their anticorrosive means, they very quickly come into disrepair.

The Rust absorbs the braking system and the spring seats. She can appear holes on the doors, fenders and bumpers.

In General, all metal parts need care. Do not forget about it. If you do not conduct anti-corrosion treatment, spare parts can wear out, and the only option will be the only replacement.

Anti-corrosive agent

anti-corrosion treatment of the bottom with their handsToday's market offers quite a lot of rust prevention. Among them are popular postmark for processing bottoms, all kinds of paints and pastes, which help to repair the coating of the body. These materials effectively protect metal from different types of negative impacts.

Anti-Corrosion treatment of the bottom of the car is often carried out The owner themselves. Below we will discuss how to carry out the work. Also important is the choice of anti-corrosive agent. You should pay attention to the fact that it should have the following properties:

  • Environmental performance (products should be safe for the human body and the environment).
  • Resistant to abrasive materials.
  • Frost resistant.
  • Flexibility (to transfer the deformation of vehicle parts during the movement).

Tools for external and internal machining

Anti-Corrosion treatment of the bottom is one of the important processes, but do not forget that the internal parts are also susceptible to the decay process. Talk about what tools are best to use for external processing, and what is necessary to cover the internal parts.

To the external parts include: the underbody, wheel arches and sills. They are constantly in contact with stones and sand flying from under the wheels of cars. For their processing it is recommended to use plastic tools such as tar bitumen and mastic characterized by anti-noise characteristics.

The Internal metal body parts treated with compositions having a wax or oil-based. They have a liquid consistency and can easily fill the smallest cracks, not allowing them to increase.

Selecting a service of anticorrosion

anti-corrosion treatment of underbody autoCorrosion control in the service is considered to be more effective. This is due to the fact that the average motorist may not detect all defects of the body and choose appropriate anti-corrosive agent correctly. Besides car specialists will save you from having to cost your own time and effort.

Find the right service station and know the menu quite easily. For example, anti-corrosion treatment of the bottom in St. Petersburg is carried out in a variety of services across the city, so you'll be able to choose.

Arriving in a specialized service, it should be clarified from the masters the basic details of the work, namely:

  • What means against corrosion they are used.
  • How you remove the existing rust.
  • How to apply coating.

If the master is talking to you confident and fluent in parts, then service you can trust and not be afraid for your car.

Stages

corrosionprocessing the bottoms in SPbRegardless of whether you are anti-corrosion treatment themselves or refer to a specialized service, work consists of several stages:

  • The First thing the machine should be thoroughly washed with detergents. The car needs to be raised in order to cleanse not only the body but also the bottom.
  • Then you need to dry off all parts. To speed up the process by blowing hot air.
  • When the car is dry, it is necessary to inspect for defects. Cracks, scratches and chips need to be processed.
  • Only then can you begin to process anti-corrosion agents.

In the service of these actions performed by professionals. If you are going to cultivate yourself, you will need a lot of time, but the result is worth it.

Anti-Corrosion treatment of the bottom with your hands

anti-corrosion treatment of the bottom with their handsFirst the machine is installed on the lift. Wheels need to be removed, as they do not need to be processed.

The Bottom need to be washed with a strong hot water pressure. This should be done thoroughly to remove all dirt.

Then you need to get rid of the rust. It is better to use sandpaper or a grinding machine.

When all the rust is removed, you should dry the car, blowing it with warm air using a dryer, otherwise anti-corrosion treatment of the bottom will be ineffective.

Next, you need to conduct a thorough Troubleshooting of the bottom, which is to get rid of cracks and holes by using anticorr.

After that, you can put rims and lowered. To use the car during the day is not recommended. Let him stand up, to harden.

How to apply corrosion-resistant coating

How well you handle the car antikorom, depends on the lifetime of equipment. To avoid difficulties during the work in advance to know the peculiarities of the application of different means.

Liquid funds are better applied with a airless spray gun. It costs dearly. There are also special guns for anti-corrosion treatment. In remote areas used the flexible nozzle.

You Can process brush. Work with it carefully, not picking up a lot of times means. All parts should be thoroughly greased. So as not to stain the belt drive and the generator, it is recommended to close the film.

Safety Rules

anti-corrosion treatment of the bottom in LipetskGetting started with processing car, you should learn the safety rules to avoid accidents.

  • Process the car should be in a room that is well ventilated.
  • You Need to follow the rules of fire safety when spraying drugs. Flammable substances do not leave under sunlight.
  • To Carry out the work necessary at a temperature not above 30 C. for Example, anti-corrosion treatment of the bottom in Lipetsk, as in other cities, in hot weather should be conducted with extreme caution.
  • If the agent gets on unprotected skin, need to wash with soap. When you hit anticorr in the eye, they are washed with running water for 15 minutes.
  • Do Not leave tools unattended.

Now you know how to perform anti-corrosion treatment of underbody with his hands. Get to work you should only if you have the skills to operate the machine and having free time. Otherwise it is better to contact the service center.


Article in other languages:

AR: https://tostpost.com/ar/cars/10071-anti-corrosion-treatment-of-underbody.html

BE: https://tostpost.com/be/a-tamab-l/18087-antykaraz-ynaya-apraco-ka-dna-a-tamab-lya.html

DE: https://tostpost.com/de/autos/18097-letzte-bearbeitung-am-unterboden-des-fahrzeugs.html

ES: https://tostpost.com/es/coches/18109-tratamiento-anticorrosivo-de-la-carrocer-a-del-veh-culo.html

HI: https://tostpost.com/hi/cars/10085-underbody.html

JA: https://tostpost.com/ja/cars/10085-anti-corrosion-treatment-of-underbody.html

KK: https://tostpost.com/kk/avtomobil-der/18085-korroziya-a-arsy-deu-t-pt-avtomobilya.html

PL: https://tostpost.com/pl/samochody/18061-antykorozyjne-leczenia-spodu-samochodu.html

PT: https://tostpost.com/pt/carros/18056-tratamento-anti-corros-o-da-parte-inferior-do-carro.html

TR: https://tostpost.com/tr/arabalar/18094-anti-pas-tedavi-dipleri-ara.html

UK: https://tostpost.com/uk/avtomob-l/18080-antikoroz-yna-obrobka-dnischa-avtomob-lya.html

ZH: https://tostpost.com/zh/cars/10923-anti-corrosion-treatment-of-underbody.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Vesta - conditioners: types, reviews

Vesta - conditioners: types, reviews

Today the market of automotive batteries are a lot of models of domestic production. They differ in performance, quality and value. On the correct choice of battery depends on stable operation of power system, the ability to produ...

"Mitsubishi Pajero Sport": photos, specifications, reviews

Car “the Pajero Sport” in the model number of Japanese corporations, ‘Mitsubishi’ occupies an intermediate position between the modifications “classic” and “Pinin”. In the name of th...

Technical characteristics of tractor DT-75 and its features

Technical characteristics of tractor DT-75 and its features

On account of the Volgograd tractor factory is a powerful and durable models that help a person in all spheres of activities. But the most outstanding representative of the group is considered a crawler tractor DT 75. The combinat...

BMW E36: tuning and specifications. Engine BMW E36

BMW E36: tuning and specifications. Engine BMW E36

BMW E36 is the third generation of the 3rd series of popular of the Bavarian manufacturer. And it was produced in 1990-th and 2000-th year. Despite the fact that the time interval is quite small, over the years the German company ...

"Ford Transit" passenger is your reliable assistant in the world of road transport!

If you are a business that is directly related to the transportation of passengers, without a reliable bus or minibus you can not do. However, at the moment there is a big competition between international manufacturers of such eq...

Hatchback

Hatchback "Mitsubishi Lancer". Owner reviews and not only

In 2005, at one of the Frankfurt dealers known Japanese company presented to the public its new hatchback called “Mitsubishi Lancer”. Reviews from owners and experts about this car was that the concept car (that car wa...