Cleaning silver jewelry at home: characteristics, effective methods and techniques

Silver has been known since ancient times and were of great value, until he learned to produce by artificial means. Up to this point, gold was valued much less, of deposits of silver very little, if even to compare with gold mines. From Sanskrit translates as silver bright, but in Ancient Russia the name silver was derived from the Indian word "Sarpa" - Moon and Sickle.

Like other precious metals, silver is marked with the assay. The figure, for example, 925 means that it is so much pure metal is in the product per 1000 parts of alloy. Earlier, the traditionally used alloy zinc and copper, but today, most self-respecting producers refused to use zinc because of evidence of its harmfulness and use other safe metals.

Regardless of high-quality silver or not, it will darken over time, as any metal is oxidized. Although many superstitious individuals believe that this damage, but is only a chemical reaction with the objects that surround people in everyday life. To cause oxidation of the silver can by the following factors:

• Moist environment;
• Direct contact with cosmetic products;
• Human sweat;
• Cooking gas and tires;
• Yolk of eggs and onions.

Despite this, the silver does not lose its popularity, and it can be easily polished. How to clean silver at home? This will be discussed in the article.

Ammonia

Effective cleaning silver jewellery at home is by using ammonia. This tool is considered the most simple and accessible, which allows you to get rid of the dirty plaque on silver. Need to purchase a 10% solution. The procedure of cleaning is recommended in a small glass container where you put silverware. After 20 minutes, the silver is washed thoroughly with warm running water and dried. This recipe is suitable for products that are not heavily oxidized or can thus be prevented.

Recommended

Body decoration - a tattoo on her back

Tattoo, or as they are briefly called – tattoo designs – the application is very stable picture on any part of the body through the lung local injury to the skin sections to be entered under it coloring pigment. Refers to the adornments o...

925 silver gold: description, cost, and interesting facts

Before you move on to what is a 925 hallmark, is to answer the question – what is meant by the General notion of a “sample”?overall it – established by GOST digital value, which is determined by the amount of the contained pre...

Zirconium (metal): medicinal properties and application

Cubic Zirconia – a steel-gray metal with a yellowish tinge. It is obtained by melting zirconium waste and ore concentrate.cubic Zirconia: prices, GOST, descriptionDesignation – GOST 21907-76. It is ductile and malleable (almost like gold)...

The Ammonia and toothpaste

In this case, the beginning of silver to clean an old toothbrush with toothpaste. The products are immersed in ammonia for 15 minutes. This recipe is perfect for a silver with heavy oxidation, but not for jewelry with stones.

Ammonia, hydrogen peroxide and baby liquid soap

All the ingredients are mixed in equal parts and diluted with a glass of water. The mixture is added to silver in a quarter of an hour. Once the metal has dried, polishing it with a cloth made of wool.

Tooth powder

The Silver must be wet, but only in warm water and immerse in a container of the powder for brushing teeth. You will need to RUB the jewelry with a cloth of wool or suede. After cleaning, the silver is washed from the powder and dried.

Baking soda

To clean you will need to dissolve a tablespoon of baking soda in half a liter of water, the mixture should be heated in the fire. After the solution began to boil, he throws a small piece of foil and placed silver. After 15 minutes, you can get the silver and rinse with water.

Salt

Cleaning silver jewellery at home can be carried out with the help of salt. You will need 200 ml of water and one teaspoon of salt. Once it is well stirred, the solution was to immerse the silver and leave for a few hours, at least 4. If the silver is very dirty, it can be boiled in the solution for about 15 minutes, not jewelry with stones.

Salt, soda and detergent

In one liter of water will need a tablespoon of baking soda, salt and dishwashing detergent. Kneading is better in aluminum cookware. A container of solution to be put on a small fire, add decorations and simmer for about 20 minutes. After that, pull the silver, allow to dry and wipe clean with a piece of suede fabric.

Potatoes

This recipe can be combined with cooking. Once the potato is cooked, water must be drained into a separate container, add some foil and dip the silver jewelry, boil for about 5-7 minutes. After that, the product removed, dried and polished.

Vinegar

Cleaning silver jewellery at home will be effective if you use vinegar 9 %, which is heated and immersed jewelry. After 10 minutes, the silver you can get, dry and well cleaned suede.

Water after cooking eggs

After the eggs are cooked, the water should not be poured, and just cool. The warm liquid placed decorations for 15 or 20 minutes. After this time silver jewelry is pulled out, very well washed and rubbed with natural fabric.

Citric acid

Effective cleaning silver jewelry at home does not require much cost or effort. For example, use citric acid. For breeding will need a bag of product, about 0.7 l of water and a small piece of copper wire. The entire composition is placed in a water bath. Decorations are placed in the solution and boil for 30 minutes.After the procedure, the jewelry should be dried and polished.

Drink “Coca Cola”

How else is cleaning silver at home? The methods may seem strange, but they are effective. Many have heard about the detergents and cleaning properties of Coca-Cola, not the exception, its application for silver. To clean your jewelry, you will need to pour a drink into a container, put the silver and put on a slow fire. Using the 7 minute decorations you need to pull out and allow to dry.

Tips to clean silver jewelry with stones

Cleaning jewelry with precious or semi-precious metals and inlaid with silver is a big difference, especially if it is carried out in the home. In this case, it is very important the density of the stone. The higher it is, the easier it is to clean silver jewelry.

How to clean silver jewelry at home, you already know. And what if they stones? If the product has an emerald, aquamarine or sapphire, they can be cleaned, even with powder, use a toothbrush and even heating.

Can Not be cleaned detergent and other abrasive tools products, inlaid with turquoise, moonstone, opal or malachite. Despite the fact that these stones also have a high density ratio, after aggressive cleaning can leave scratches.

In Any case can not be subjected to thermal effects such stones as ruby, garnet and Topaz. After immersion in hot water, they can even change the color.

No exception is silver, which is encrusted with glass or enameled stones. Such jewelry can also be cleaned, but only “soft” way. For example, a cotton swab is placed in a tooth powder, and gently clean off the dirt. Pre-cotton wool can be dipped in ammonia. In any case, you cannot use abrasives and high temperature. These stones can not stand and mechanical damage.

Cleaning silver with stones soft and porous structures

What other known methods? How to clean silver jewelry with stones soft and porous structure? Such stones include mother of pearl, pearls, ivory and amber. In any case, you cannot use cleaners based on ammonia, acidic, alkaline and abrasives.

Amber and pearls can be soaked in warm but not hot water and wipe with a cloth with a soft texture. In the water add a little soap. If silver jewellery corals, it is best to clean it without touching the stone, as it is too sensitive for any practical effect.

How to make glitter silver

Besides the fact that I want to see your silver in a perfectly pure state, it is desirable that it still glistened.

How to clean silver at home to Shine? For polishing and getting glare on the products using a paste GOI. In principle, all of the above methods cleaning products allow you to achieve brilliance. But sometimes, even if all the dirt out, silver seems faded. In fact, this RAID – the thinnest layer of corrosion. Therefore, to obtain Shine is better to use special polishes. They safely remove plaque from the surface of the metal and give them an attractive appearance, which was at purchase.

Polishing is better to use a sponge made from cellulose, since it will not scratch the silver. With certain polishes they are included. The sponge is moistened with means and reciprocating movements, i.e. up and down, but not in a circle, clean product. After polishing, the product is washed in running water and wiped dry with a clean and soft cloth.

Prevention activities

Always make sure to wipe the silver after swimming in the river, tub, or pool. Or even better take them off before will be in a humid environment.

If you are using rubber gloves for washing dishes, then you better take the ring. Remember that silver does not tolerate contact with rubber.