KamAZ-5320, PSU: the device and principle of work

Date:

2018-05-19 18:00:42

Views:

962

Rating:

1Like 0Dislike

Share:

Table of contents:

What is the device PGU of KAMAZ-5320? This question interests many beginners. This abbreviation may cause confusion in an ignorant person. In fact, PSU – pneumatic-hydraulic power steering. Consider the features of this device, its working principle and types of services, including repairs.

KAMAZ 5320 device PSU

  • 1 – spherical nut with lock nut.
  • 2 – piston pusher fetter clutch.
  • 3 – the safety case.
  • 4 – piston clutch.
  • 5 – the rear part of the frame.
  • 6 – complete seal.
  • 7 – witness the piston.
  • 8 – a relief valve with cap.
  • 9 – aperture.
  • 10 – the valve inlet.
  • 11 – senior counterpart.
  • 12 – the piston of the pneumatic type.
  • 13 – the drain tube (to condensate).
  • 14 – front part of the body.
  • “And” – the supply of the working fluid.
  • “B” – the admission of compressed air.

Purpose of the device

A Truck – a fairly massive and bulky appliances. Its control requires a remarkable physical strength and endurance. Device PSU KAMAZ-5320 allows easy alignment of the vehicle. This is a small but useful device. It allows not only to simplify the work of the driver, but also increases productivity.

Consider the node consists of the following elements:

  • Piston tappet and adjusting nut.
  • Pneumatic and hydraulic cylinder.
  • Spring mechanism, reducer with cap and valve.
  • Seat diaphragm control screw.
  • The Wastegate and servo piston fixture.

Features

Cabinet amplifier system consists of two elements. The front part is made of aluminium and the rear analogue – made of cast iron. Between the parts there is a special gasket, which acts like a gasket and diaphragm. Tracking mechanism regulates the air pressure changes on pnevmoballony in automatic mode. This fixture also includes a sealing cuff, springs, diaphragms and valves on the inlet and outlet.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

spare part KAMAZ

Principle of operation

When you press the clutch pedal under the fluid pressure device PSU KAMAZ-5320 presses on the rod and the piston of the servo device, and then design together with the diaphragm is displaced to the opened inlet valve. Then a mixture of air from the pneumatic system of the vehicle is supplied to pnevmoballony. The result of the cumulative efforts of both elements that allows to remove the plug and turn off the clutch.

After the foot is removed from clutch pedal, the pressure of the inlet main fluid drops to zero indicator. As a result, decreases the load on the hydraulic pistons Executive and a tracking mechanism. For this reason, the hydraulic type piston begins to move in the reverse direction, closing the inlet valve and blocking the flow of pressure from the receiver. Diaphragm spring acting on the servo piston, carries it in its original position. Air, initially reacting with pneumatic piston vented to atmosphere. Stock with both piston returns to the starting position.

Production

Device PSU KAMAZ-5320 suitable for many model modifications this manufacturer. Most of the old and new tractors, dump trucks, military variants equipped with a pneumatic servo. Modern versions produced by different companies, have the following meaning:

  • Spare Parts KAMAZ (PSU) of JSC «KAMAZ» (catalog number 5320) with a vertical location of the tracking device. The device above the body of the cylinder is used in the variations under the symbol 4310, 5320, 4318 and others.
  • WABCO. PSU under this brand are manufactured in the USA, are reliable and compact dimensions. This equipment is equipped with a system for tracking the condition of the linings, the wear level which is available to determine without disassembling the power unit. Most of the trucks with gear box series 154 are equipped with this pneumatic equipment.
  • Pneumohydraulic clutch «WABCO” for models with transmission type ZF.
  • Analogs produced at the plant in Ukraine (Volchansk) or Turkey (Yumak).

pneumohydraulic clutch

In terms of amp selection specialists recommend to buy the same brand and model that was originally installed on the machine. This will help to ensure the correct interaction between the amplifier and the coupling mechanism. Before you change the node to a new variation, please consult a specialist.

Services

To maintain the operational state of the node carry out the following activities:

  • Visual inspection to detect visible leakage of air and fluid.
  • Tightening of the fixing bolts.
  • Adjustment free stroke of the pushrod with a spherical nut.
  • Refilling fluid in the tank system.

It is Worth noting that when adjusting the PSU KAMAZ-5320 modification Wabco, wear of clutch linings easily visible on a special pointer that put forward under the influence of the piston.

repair of PSU KAMAZ 5320

Demolition

This procedure whennecessary, is performed in the following order:

  • Back of the case clamped in a vise.
  • Unscrewed the bolts. Removed the washers and cap.
  • Removed the valve from the Cabinet.
  • Removed the front skeleton with pneumatic piston and diaphragm.
  • Removed: diaphragm, piston servo, snap ring, item clutch housing and gasket.
  • Removed the bypass valve mechanism and the hatch with the exhaust gasket.
  • The Skeleton is removed from the Vice.
  • Removed the Circlip back of the case.
  • The valve Stem is released from all cones, washers and seats.
  • Witness the piston is removed (you must remove the stopper and other related elements).
  • From the front of the housing is removed the pneumatic piston, the cuff and the ring.
  • Then all parts are washed in gasoline (kerosene), they are saturated with compressed air and through the stage of fault detection.

PSU KAMAZ-5320: fault

Most Often in the considered node are having problems of the following nature:

  • Compressed air flow is supplied in insufficient quantity or absent. The cause of the fault – the swell of the intake valve pneumatic amplifier.
  • Jamming of the servo piston in the pneumatic booster. Most likely, the reason lies in the deformation of the sealing rings or cuffs.
  • There is a “failure” the pedal that is not fully off the clutch. This problem indicates the ingress of air into the hydraulic actuator.

principle of CCGT KAMAZ 5320

Repair of PSU KAMAZ-5320

Through the Troubleshooting of node elements, special attention should be paid to the following points:

  • Check the sealing parts. Not allowed on them deformations, swelling and fractures. In case of violation of the elasticity of the material the component should be replaced.
  • State of the working surfaces of the cylinders. Controlled internal clearance of the diameter of the cylinders, which in fact should correspond to the norm. The parts should be no dents or cracks.

Repair kit PSU includes spare parts KAMAZ:

  • Protective case back housing.
  • Cone and diaphragm of the reducer.
  • Cuffs for pneumatic and servo-piston.
  • Cap bypass valve.
  • Retaining and o-rings.

Before Assembly all parts should be treated with a lubricant of a type “lithol”.

Replacement and installation

To replace the considered node, perform the following manipulation:

  • Is bleed air from the PSU KAMAZ-5320.
  • Merges the working fluid or overlaps with the drain tube.
  • Removed the clamping spring fork lever for clutch.
  • From the device, disconnect the supply air and water pipes.
  • Unscrewed feints mounts to the crankcase, after which the unit is dismantled.

PSU KAMAZ 5320 malfunction

After replacing the warped and worthless elements, the system is checked for leaks in the hydraulic and pneumatic parts. The Assembly procedure is as follows:

  • Combine all the fixing holes with the slots in the crankcase, and then fixed the amp with a pair of bolts with lock washers.
  • Connects the hydraulic hose and air pipe.
  • Mounted attiny spring mechanism fork of the clutch Assembly.
  • Compensating reservoir and pour the brake fluid, then pumped the hydraulic drive system.
  • Re-Check tightness of connections on the subject of leaks of liquid.
  • Adjustable, if necessary, the clearance between the end part of the cover and the limit switch activator gear splitter.

Schematic diagram of the connection and placement of the elements of the node

The Principle of operation of combined-cycle plant of KAMAZ-5320 easier to understand after examining the scheme presented below, with explanations.

PSU KAMAZ 5320 bleed air

  • A – standard scheme of interaction of the parts of the drive.
  • B – location and fixing of the node elements.
  • 1 – pedal clutch unit.
  • 2 – main cylinder.
  • 3 – the cylindrical part of the pneumatic amplifier.
  • 4 – a tracking mechanism pneumatic parts.
  • 5 – a duct.
  • 6 – the main hydraulic cylinder.
  • 7 – deactivate coupling with the bearing.
  • 8 – lever.
  • 9 – stock.
  • 10 ’ hose and pipe drive.

The Reporting node is quite clear and simple device. However, its role in the management of trucks is very significant. The use of CCGT allows to significantly facilitate control and increase the efficiency of the vehicle.


Article in other languages:

AR: https://tostpost.com/ar/cars/4899-5320-psu.html

BE: https://tostpost.com/be/a-tamab-l/8717-kamaz-5320-pdu-prylada-pryncyp-pracy.html

DE: https://tostpost.com/de/autos/8718-kamaz-5320-pgu-struktur-und-arbeitsweise.html

ES: https://tostpost.com/es/coches/8724-kamaz-5320-ucc-estructura-y-principio-de-funcionamiento.html

HI: https://tostpost.com/hi/cars/4901-kamaz-5320.html

JA: https://tostpost.com/ja/cars/4899-kamaz-5320-psu.html

KK: https://tostpost.com/kk/avtomobil-der/8720-kamaz-5320-pmu-da-ryl-ysy-zh-ne-zh-mys-steu-princip.html

PL: https://tostpost.com/pl/samochody/8720-kamaz-5320-psu-budowa-i-zasada-pracy.html

PT: https://tostpost.com/pt/carros/8716-kamaz-5320-pgu-dispositivo-e-princ-pio-de-funcionamento.html

TR: https://tostpost.com/tr/arabalar/8724-kamaz-5320-psu-cihaz-ve-al-ma-prensibi.html

UK: https://tostpost.com/uk/avtomob-l/8721-kamaz-5320-pgu-pristr-y-princip-roboti.html

ZH: https://tostpost.com/zh/cars/5330-5320.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

How to sell a car. And some advice from a seasoned driver

How to sell a car. And some advice from a seasoned driver

Buying and selling cars is serious business, and you handle it accordingly. Need to renew a lot of different documents and perform a number of procedures. Is it possible to understand all these subtleties? One friend told abo...

For what the car uses glass door closer?

For what the car uses glass door closer?

Electronic door closer car Windows – it is a special electronic mechanism that automatically closes the window when the buttons are pressed the key FOB. The use of such devices allows to significantly facilitate the life of ...

How to arrange the sale of the car?

How to arrange the sale of the car?

Most modern drivers have to face for the first time since the sale of the car. Someone just decided to change the car more comfortable. Another motorist also because of some personal circumstances just need cash, the proceeds from...

"Peugeot Expert": the owner reviews. Technical characteristics of Peugeot Expert

Stylish and spacious van "Peugeot Expert" produced in the factories of French carmaker Peugeot since 1995. The model created on the basis of a similar van "Peugeot 806" and is manufactured at the plant of SEVEL (South of France). ...

Rating of automotive compressors: brands, features, comparison

Rating of automotive compressors: brands, features, comparison

Every professional motorist is faced with the problem, when a punctured tire with a nail or screw stuck in the hole and not be broken in the pit. To the nearest ten kilometers tire, spare was flat. Regular automotive pump will not...

The Lamborghini Veneno is one of the most exclusive cars on the planet

The Lamborghini Veneno is one of the most exclusive cars on the planet

During the last auto show in the Swiss city of Geneva demonstrated one of the most exclusive cars on the planet – the Lamborghini Veneno. According to representatives of the manufacturer in total will be collected only three...