How to paint a car with your hands: tips

Date:

2019-11-27 20:20:26

Views:

543

Rating:

1Like 0Dislike

Share:

Table of contents:

In the process of operation of the vehicle its appearance over time, loses its former glory. This is a result of precipitation (rain, snow) and dirt on the body. In serious cases, it may be necessary to complete the painting of cars. The question arises: where you can paint a car, spending a minimum of means? The first option is to use the services of professional masters. However this service will result in a tidy sum of money. The painting can be done at home, the results will not differ (with due and proper approach).

Preparatory work

The First thing you need to start workplace. It can be both a garage and a dedicated hangar. In any case, the room should not be dirty, dusty and damp. This is due to the fact that moisture and dust entering the body, destroy the integrity of the paint. What paint will last for a long time. By visual inspection it is important to pay attention to everything, even the smallest moments. Responding to a question about how to paint a car with your own hands, it is important to remember that the car should be thoroughly rinsed.

Most vulnerable places: fenders, racks, bottom, thresholds. They should be cleaned very carefully. Visual inspection involves looking for obvious deficiencies. It may be corroded, swollen bubbles of paint, serious dents, deep scratches and chips. Upon detection of such flaws will require additional equipment: welding and grinder. All the problems are solved on the spot, before applying paint.

paint the car tyres

Clean up the working surface

The Next stage – the removal of all elements which cannot be painted. This applies to Windows, bumpers, door handles (hood, trunk), spoiler. Individual body you can try to protect with adhesive tapes and films (some glass accessories that cannot be removed without substantial damage). During this phase, and straightening. Is the process of leveling the surface of the body. To do this, use the ordinary pneumatic hammer. To paint the car completely and ensure the durability of paint coating, it is necessary to get rid of all irregularities. Hammer surface should be completely smooth. Otherwise, the details will leave marks that will be visible when procrast.

Features ratowania

When the straightening special attention is paid to the curves of the metal thresholds and places where there were deep scratches. Here accumulate dirt, and can be exposed to corrosion after painting. It is important to remember that if the car has several times been the body repair, it is not necessary to completely get rid of dents. The fact that after ratowania metal as it is stretched. So just straightening will not produce positive results. To protect the wheels best to buy a special cover.

paint the car in matte

Grinding

Grinding is carried out using the grinder and sandpaper. Significant chips and scratches it is best to handle a plane on metal. The places which are most subjected to corrosion, cleaned grinder. Is the wheel arches and the bottom. The rest of the body is cleaned with a grinding machine. Answering the question about how much it costs to paint a car completely, it is important to consider your own skills. If experience in cleaning metal surfaces in preparation for painting it, it is better to use services of professional plumbers. They will produce as straightening and primary training. However, the cost of painting will increase significantly.

After cleaning the metal surface should be completely clean of paint. If in some places the latter is held firmly, you should use a special sponge (Scotch-Brite). It allows you to get rid of the glossy Shine on the body. This is sufficient for applying a new coat of paint.

where to paint a car

Characteristics and types of coatings to the auto body

Putty work is done in several stages – the application of 3-4 layers. After each layer the body needs to be sanded. This is because after removing the paint in some places, the metal is thinner. If you paint the car at this point, the coating will not last a year. There are several types of putty. The most popular is soft-putty. It applies to all types of metals and to apply an equal layer, filling irregularities and roughness. If the body is seriously damaged, repair the dents (and even holes) can filler with fiberglass. This material is very durable, but itit is difficult to handle. Working with him is possible, only possessing the appropriate skills.

In General, the question about how much it costs to paint a car completely, can be answered in different ways. It all depends on the availability of the tools. For example, buy grinders (from R. 800 to 2500) and pneumatic (price from 1000 to 3000 p.) will cost a significant amount. As for filler material, it is represented in the construction market. Rate putty (medium size car class "sedan") will be 1.5 kg per square meter. Based on this, you will need at least 7 kg of material to ensure high quality work. Do not forget about primer. On the car in General will need about 700 grams. The total cost of the preparatory works on alignment, primer and putty (with moderate use) will be 7000-9000 rubles. Depending on the quality of ratowania and selection of the type of filler, the final cost could change.

The Technology of applying the putty

You'll need a rubber spatula. After buying the right amount of putty you can get to work. You should note that every manufacturer on the packaging indicates the period during which the material subject to drying. After applying the final layer of the sand body. You can use the machine for grinding or to carry out the procedure with the sandpaper. Ultimately, the surface must be smooth. If this effect is not achieved should be repeated grinding. In exceptional cases, when putty applied a rough layer, it is better to re-grinding. In this case, you will protect yourself from uneven overlap of paint on the back of the car.

The answer to the question about how to paint a car with his own hands, with the necessary elements, is quite simple. With proper and responsible approach, the end result will not differ from the work of professional painters. In addition, will be saved money that can be spent on painting other elements of the car, e.g. wheels.

paint the car liquid rubber

Primer works

The Last stage of the preparatory work - the primer body. Some deliberately bypasses this step (for example, in order to save). However, the main advantage of the primer is an additional protection of the body from moisture. Most primers are made on the basis of acrylic. This material is moisture, which increases the service life of paint coating.

The question Arises: what is the cost to paint the car when carrying out priming works? For each element of cars will leave different amounts of priming. Thus, the cost for processing the bonnet will be about 450 ml, 250 for the bumper, the rest of the elements - about 150 ml. Based on these averaged data, it is possible to calculate the average price of the primer body. In any case, the result – complete protection against moisture and rust will have a beneficial effect on the consolidation of paint on the surface.

how to paint a car with spray can

Methods of priming

The Primer is applied by a compressor. You will need 2 layers. The first layer – revealing. Added primer to the enamel and solvent. All this is applied to the body with a view to identifying irregularities when applying the putty. These pores should be immediately removed with sandpaper. The second layer – primary. To protect the bodywork from corrosion and moisture. At this preliminary stage is completed. You need a day to leave the car in a dry place for “setting” priming. The next day we can start to paint.

Painting cars spray

The Most economical and efficient option – car painting using spray. What color to paint the car, decide the owner of the car. Now the automotive markets huge selection of colors and various shades. The main advantages of this method of painting is the convenience of applying paintwork on the surface of the car. Thus it is possible to achieve uniform coating even in hard to reach places (for example, in wheel arches or the underside of the car).

Painting begins with degreasing work surface. This is done by applying a solvent to all parts of the treated metal. You can then apply paint. It is better to experiment on unnecessary material. It is important to understand how the paint lays on the surface, with some distance, the best time to spray. The vast majority of the spray allows you to spray the paintwork from a distance of at least 30 cm

Before applying the spray should be thoroughly shaken. The first coat is applied quickly enough. It is important to ensure that the body remained missing elements. One layernot enough. You need to wait about 30 minutes. During this time the paint dries. After applied to the second layer. If you have any defects and irregularities, is necessary for the third layer. Then use spray varnish to apply 2 layers of coating. It is important to ensure that no damage, or give the impression that the body is painted unevenly. In General, answering a question about how to paint a car spray-painted, it is important to note that the LCP should be applied smoothly. You also need to allow time for drying the body before applying the next layer.

how to paint a car with their hands

Giving the car a matte shade

More and more cars painted in matte color. Now there are plenty of such hues. The most popular are black, brown and white. You can apply a matte color only on some parts of the body. In this case, remains nothing how to paint a car spray-painted with the desired color.

Opacity can be given, using the appropriate varnish. The procedure is carried out in several stages: varnish is applied to the old surface of the car to hide the glossy sheen of the old paint. Then spray the matte paint is coated on the body covering. This procedure does not differ from the usual repaint the car.

The Most expensive and spectacular form of painting is the addition of velvet luster. It gives the car a "roughness" that is felt when touching the body. Thus, to paint a car in matte color can be in any way possible. To perform this procedure independently. Or - if finances allow – with the help of professional painters.

Features of body painting liquid rubber

Liquid rubber is characterized in that it is applied to the surface of the body relatively easily and also dries quickly. This is due to the feature of the ink composition. It is based on polymer-bitumen substance which when exposed to the external environment instantly hardens and forms a thick protective film. This caveat should be considered when determining where you will be painting. Overall the car paint liquid rubber can independently withstand all temperature conditions, and with the help of professional painters. The latter option, however, will affect the wallet of the motorist. We did not address it.

The Advantage of this method of coloring is that it can be applied by aerosol, or conventional brush. When spraying it turns smooth and dense layer, which is difficult to achieve when working with painting tools. Given the fact that the composition has a dense base, it should be diluted. In most cases, the conventional solvent is not suitable. The best option – proprietary solvents manufacturer's recommended rubber paint (this information is on the label). Rubber paint is applied in 3 layers. The break between them should be not less than 10 minutes. In the end, cars must be left in a warm place for a day. After it you can start polishing for Shine. So, answering the question of how to paint the machine with your hands, it is important to remember that it will take long and painstaking work. Only in this case it is possible to achieve the best result.

how much to paint a car completely

Tips on painting a car

For best results, it is best to paint each element of the car separately. If this is not possible, care should be taken that the paint did not get to open spaces, not be white. This applies to plastic, wipers, wheels. In all cases, the visible parts of the body are closed with film or tape. So to paint the car tires, you will need to buy covers for the wheels. The only way caustic liquid will not get on the bus.

Before working, it is important to calculate the right amount of supplies. This applies to both paint and solvents and fillers. In critical situations when the car has significant body damage, will need additional tools: a hammer (for straightening), welding, sandpaper, Scotch. In General, the question of how to paint the machine with your hands, is relevant to those who don't want to pay for easy and simple work to specialized centers for painting cars.

how much to paint a car

Conclusion

The answer to the question about how to paint a car with his own hands, quite simple – you need to be patient and follow all the steps discussed in the article. In this case, it is possible not only to avoid typical mistakes and save considerable funds that would have gone to rectification of defects arising during operation. Another important question. How much it costs to paint a car, if you use only the materials at hand? The final cost will depend on supplies and equipment deterioration. So, when painting with spray is necessary to consider that the consumption is about 200 ml on average, every element of the car. Average price of paint varies from 150 to 300 rubles (in different regions it's different). The volume of one spray - 200 ml. of overall body painting a car will take about 2 liters of paint. This average price and it depends on technology and thickness of the layers. So, the cost of the purchasecans will be 3000 rubles. Taking into account solvent and curing agent, the price will increase to 5500-7500 rubles. Thus, this figure will be 10 times less than if you have used the services of professional painters.


Article in other languages:

AR: https://tostpost.com/ar/cars/20072-how-to-paint-a-car-with-your-hands-tips.html

BE: https://tostpost.com/be/a-tamab-l/37798-yak-pafarbavac-mashynu-sva-m-rukam-karysnyya-parady.html

DE: https://tostpost.com/de/autos/37392-wie-malen-die-maschine-mit-seinen-h-nden-n-tzliche-tipps.html

ES: https://tostpost.com/es/coches/37155-como-pintar-el-coche-con-sus-manos-consejos-tiles.html

HI: https://tostpost.com/hi/cars/21760-how-to-paint-a-car-with-your-hands-tips.html

JA: https://tostpost.com/ja/cars/19697-how-to-paint-a-car-with-your-hands-tips.html

KK: https://tostpost.com/kk/avtomobil-der/38121-alay-boyau-mashinany-z-olymen-paydaly-ke-ester.html

PL: https://tostpost.com/pl/samochody/39623-jak-pomalowa-samoch-d-w-asnymi-r-kami-przydatne-wskaz-wki.html

PT: https://tostpost.com/pt/carros/39290-como-pintar-o-carro-com-as-m-os-dicas-teis.html

TR: https://tostpost.com/tr/arabalar/34658-olarak-boya-makinesi-kendi-elleriyle-yararl-ipu-lar.html

UK: https://tostpost.com/uk/avtomob-l/38520-yak-pofarbuvati-mashinu-svo-mi-rukami-korisn-poradi.html

ZH: https://tostpost.com/zh/cars/38204-how-to-paint-a-car-with-your-hands-tips.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Motorcycle

Motorcycle "IRBIS Virago 110": features and reviews

If you want to buy a motorcycle for the first time and not versed in the many different models that work well for beginners, in this case it is necessary to pay attention to quality and modern model – IRBIS Virago 110. This ...

"Chevrolet Rezzo": specifications, photos, reviews of owners

In Europe, the minivan "Chevrolet Rezzo" debuted in Geneva (2001). The car was classy, at that time appearance. The design is a little different from the brothers in class due to the unusually low landing floor. Here, all units ar...

ATV IRBIS: they are better than the competitors?

ATV IRBIS: they are better than the competitors?

Those people who like energetic, exciting and extreme rest, are increasingly buying for such purposes the notorious Quad "IRBIS", which can successfully replace as the car and bike.brand DistributionThese units – modern and ...

A brief overview of the car

A brief overview of the car "Hyundai Avante"

the Car «Hyundai Avante”, photos of which are below, was developed by South Korean company Hyundai Motor Company. Under this name he produces only for the domestic market of the country. With regard to consumers from o...

A brief overview of the car

A brief overview of the car "Toyota matrix"

On a project car "Toyota matrix”, a photo of which is located below, the designers of the Japanese company worked together with representatives of the American Corporation General Motors. The creation of the model began...

"Lexus GS300" - owner reviews, specifications, photos

the Car "Lexus" - the benchmark for many. On the advertising company takes a lot of money and popularity continues unabated. But for motorists expectations are not always justified. For those interested in the GS300, this article ...