Carburetor "soleks 21073" with "Niva": the setup, repair, adjustment, reviews

Date:

2020-01-11 06:00:16

Views:

434

Rating:

1Like 0Dislike

Share:

Table of contents:

Despite the fact that the SUV VAZ-2121 developed for a long time, a car that still enjoys great popularity. In 1994, the model was changed to VAZ-21213. Many people purchase these cars because of their high permeability, which are the envy of some jeeps from well known brands. Others like the reliability, simplicity and high maintainability. Simple design and excellent off-road performance has made this car transport for lovers of travel, hunting, fishing and tourism.

Automobiles “field” 211213 equipped with 1.7-liter engines carburetor It, and it is based on the engine VAZ-2106. There is also a five-speed manual transmission and contactless ignition system. In the power supply system includes a carburetor “Solex” 21073 on “Field”. Many novice car owners afraid of carbs and all that is connected with them. But the carburetor – is not a sentence. You just need to understand its underlying device, ways to adjust and learn how to repair it.

Device

Carburetor “Solex” 21073, on “Field” 1.7 installed, can be attributed to the group of emulsion devices. carburetor soleks 21073 cornfieldThe Mechanism is used for preparing fuel-air mixture. The device consists of two parts – body and cover. Also, the device consists of a float chamber with the possibility of level balancing. Includes accelerator pump, economiser, ekonostat. The design has two fuel chambers and diffusers. They are preparing the fuel mixture. The cover is installed the fittings, through which gasoline is fed to the carburetor and excess fuel goes back to tank. Also in the lid there are studs. They serve for fastening of the air filter. Even the cover is equipped with a needle valve to the float chamber, where it directly regulates the fuel level. In the carburetor there is a choke is a mechanical type. It enables the engine to start “cold”. In this modification the carburetor “Solex” 21073 on “Field” 21213 shows very high efficiency. The device when properly configured, can provide very high specifications for vehicles with front wheel drive.

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Principle of operation

Set the carburetor “Solex” 21073 on “Field” is designed for mixing of fuel and air and supply it to the combustion chamber of the engine. After starting the power unit, the driver closes the throttle. This ensures supply of rich mixture into the cylinders. 21073 carburetor Solex in the field repairsUsing the automatic adjustment system provides increased air flow due to the rotation of the throttle. As soon as the engine is warmed, the choke removed. The carburetor begins to operate at its primary operating mode. Gasoline from the fuel tank using a membrane pump is supplied to the float chamber. The amount of fuel depends on the position of the needle valve. Further, the liquid fuel through special channels, which are located in the body of the instrument, gets into the main jet. Then into the first mixing chamber. The second camera of the device will be used when the motor will work under high load – if the driver sharply presses the accelerator pedal. When the engine is idling, start the electromagnetic valve. Due to this motor can run stably. Decreases fuel consumption.

With Float mechanism

Carburetor “Solex” 21073, on “Field” set, float chamber has two sections. They are on either side of the main camera device. The system consists of two float made of hard rubber, which is fixed to the lever. 21073 carburetor Solex in the field device

The Last swinging on the axis is pressed into the tides cover. The bracket has a tongue. Element through a special ball pushes on the needle of the needle valve. The float mechanism is used to adjust the level of fuel required for normal operation of the carburetor. Needle valve - sealed type. It can not be repaired. The valve body is installed on the threads in carburetor cover. The ball keeps the needle from bumps when driving the car. If the camera is empty (for example, if the driver uses LPG), then the floats will knock.

Main metering system

The First and second chambers are equipped with diffusers. There is one large and one small item. Together with small diffusers made and the spray device. The latter is connected through the channels of the emulsion from wells, and those are reported through a single channel with the float chamber. To gasoline has been defined portions, at the bottom in the emulsion wells are the main fuel jets. In these wells there are special tube. Each top is equipped with an air nozzle. The air is supplied to them from the neck of the instrument.

The Principle of operation of the main metering camera

Under the influence of rarefaction that occurs in the cylinders of the engine, air is drawn through the filter. Next, oxygen is supplied into the first chamber. It goes through the diffusers. Due to the fact that the air flow rate is increased, the area of the spray creates an even greater vacuum. carburetor soleks 21073 on Niva 1 7

Under its action the fuel rises from the emulsion well of the atomizer. Along with this, the air passes through the air jet in the emulsion tube and further mixes with the fuel. The resulting emulsion, which at high speed is absorbed into the channels of the carb, where it joins with the air flow. According to this principle a mounted carburetor “Solex” 21073 on “Field”. The device may vary depending on modifications. But the principle of operation of the system is approximately the same for all devices.

System idle

The Device is equipped with system idling. It is designed to enable the operation of the motor at high speeds. At this point, the vacuum in the diffuser is very small. The fuel cannot get into the main metering system. At idling speed of the engine, the fuel is under the throttle of the first chamber of the carburetor. There is a vacuum strong enough to form a stable combustible mixture. carburetor soleks 21073 on the field reviews

The Air is supplied through the main jet and the emulsion well of the first chamber. Then fuel gets to the fuel jet of idling. After that, mixed with air, which is supplied from the air jet of the twentieth. For the element oxygen is supplied through a special channel. This arrangement allows the engine to provide a smooth transition from load to idle and does not allow the fuel to flow from the float chamber.

Ekonostat

Carburetor “Solex” 20173 on “Field” feature econostrum. This device is necessary for the enrichment of the fuel mixture, which is prepared in the second chamber when the throttle is fully open.

Troubleshooting

Parts of the vehicle will not last forever and sometimes fails set the carburetor “Solex" 21073 on “Field”. To repair it you need to start with diagnostics. You may be able to do a simple adjustment. So, in the process, in the carb can get solid particles that are the cause of clogging of the nozzles. Poor quality gasoline leads to the formation of deposits on the walls of the channels in the device. This significantly reduces their cross-section. The damage systems of the carb can be diagnosed by the following symptoms:

  • Increased fuel consumption.
  • Difficulties in starting the engine. Reducing the power and dynamic characteristics.
  • Unstable idling.

In this case, it is necessary to clean the installed carburetor “Solex” 21073 on “Field”. Adjustment, which will be held after that allow the device to work again as it should.

How to restore the carb?

To repair often have to remove the device from the engine. First, disassemble the air filter. Then removed the fuel lines, air hoses, wires and cables. next Unscrew the mounting nuts. carburetor soleks 21073 on Niva 2121

Disassemble the carb better on the table, or on another suitable surface. Parts should be put in some order. This will help not to lose them. The process of adjustment of the needle valve is performed using a special template. For flushing of the device requires the use of special liquid. The nozzles replacement can be purchased at any auto stores. Often, disassembly and flushing of the carburetor helps to solve a lot of problems.

Alignment

If failed set the carburetor “Solex" 21073 on “Field”, repair and adjustment help to bring the device to life. Settings allow you to restore the optimal conditions in which the motor will operate as efficiently as possible. Fuel consumption at the same average. First thing make a bit and warm up the engine. Next, you need to dismantle the fuel hose and cap device. The latter is recommended to be removed with extreme caution so as not to damage the float. Next, using a measuring tool vymirayut distance in each chamber of the carburetor. Measure from the mating planes to the edge of the fuel. The size should roughly be about 24 mm. If the distance is less or more, adjust it by bending the float. Then you need to start again and to warm up the motor. When level adjustment is completed successfully, you can move to setting the idle speed. carburetor soleks 21073 on the Niva 21213

The Engine jammed. For setup, you need a flat-blade screwdriver and a little time. On the sole of the device there is a hole where the screw that adjusts the quality of the fuel mixture. It spin until it stops. Further away from the extreme position the same screw Unscrew approximately five turns. Then get the motor. The suction is not necessary to use. If you remove the screw “quality”, then the carb will change the engine speed. Then spin it again. You want to rotate until the motor will not be stable and sustainable. When the engine starts to operate, then the element is not twisting more than one revolution. The result is the idle set to around 900. If the motor begins to stall, it is better to slightly increase the idle speed.

Conclusion

This is the most basic adjustment that will allow you to fully customize the installed carburetor “Solex” 21073 on “Field”. Reviews aboutthis carb is good, and set him not only “Field”, but the other models of front-VAZ.


Article in other languages:

AR: https://tostpost.com/ar/cars/20617-soleks-21073.html

BE: https://tostpost.com/be/a-tamab-l/38254-karbyuratar-soleks-21073-na-n-vu-prylada-ramont-regulyavanne-vodguk.html

DE: https://tostpost.com/de/autos/37846-vergaser-solex-21073-auf-das-feld-gerammt-ein-ger-t-reparatur-einstell.html

ES: https://tostpost.com/es/coches/37628-el-carburador-soleks-21073-en-el-campo-el-dispositivo-reparaci-n-ajust.html

HI: https://tostpost.com/hi/cars/22277-soleks-21073-niva.html

JA: https://tostpost.com/ja/cars/20260-soleks21073-niva.html

KK: https://tostpost.com/kk/avtomobil-der/38661-karbyurator-soleks-21073-zh-ne-niva-ryl-y-zh-ndeu-retteu-p-k-rler.html

PL: https://tostpost.com/pl/samochody/40229-ga-nik-soleks-21073-na-pole-urz-dzenia-naprawa-regulacja-opinie.html

PT: https://tostpost.com/pt/carros/39863-carburador-soleks-21073-para-milharal-um-dispositivo-de-reparo-ajustam.html

TR: https://tostpost.com/tr/arabalar/35111-karb-rat-r-soleks-21073-ile-ekmek-cihaz-tamir-ayar-yorumlar.html

UK: https://tostpost.com/uk/avtomob-l/39043-karbyurator-soleks-21073-na-nivu-pristr-y-remont-regulyuvannya-v-dguki.html

ZH: https://tostpost.com/zh/cars/21257-soleks21073.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

Wipers VAZ-2110: replace with your own hands

Wipers VAZ-2110: replace with your own hands

anyone who has ever driven a car with broken windshield wipers in heavy rain or snow, can tell how hard it is and dangerous. Not to get into a similar situation, you need to monitor the condition of the wiper blades and in a timel...

"Moskvich 434": specifications, photos

Each of us saw a car like "Muscovite". Now these machines are becoming a thing of history. "Moskvich 434" is no exception. To find a really “live” the copy is not possible. Often, many people associate these ...

"Lada Largus Cross": owner reviews, all cons, photos

In 2014, the Russian concern "AVTOVAZ" has presented the unusual novelty. We are talking about the “off road" modifications of the passenger wagon, which became known as the «Lada Largus Cross”. Reviews by r...

Throttle

Throttle "Lancer-9": the possible damage, repairs, replacement

the Car ‘Mitsubishi Lancer” – survivor the Japanese car industry (now available for the tenth generation). It is appreciated for its ruggedness, reliability, good maintainability. Motorists also attract a good mi...

How to check catalyst oppression: a step by step instruction device and recommendations

How to check catalyst oppression: a step by step instruction device and recommendations

every year in the world of stricter environmental standards. At the moment in the European Union used cars with the exhaust is not below the “Euro 4». In Russia less demanding environmental exhaust. However, even moder...