Talk about stabilizer bushing

Date:

2020-02-20 10:20:07

Views:

509

Rating:

1Like 0Dislike

Share:

Table of contents:

The Car should be comfortable and safe. Must move evenly. To be stable against tipping over in the turns. To achieve such indicators, there is a lot of different ways. Now we will focus on the stabilizer bar and its components in the suspension system of the vehicle.

Surely, every driver repeatedly noticed that the car when cornering lurches to the side. Other machine, on the contrary, if his tires in the roadbed, passes the turn without excess rocking.

Of Course, a lot depends on the type and design of the suspension. And, by the way, from the series in the series she is undergoing significant changes. It should be noted that for a comfortable ride the suspension should be soft. But softness has many disadvantages. One of them – the rocking of the body. To prevent this phenomenon, designers can go to various tricks. More on that later.

The Installation of the stabilizer allows the suspension to be a bit tough to keep the car from excessive rocking by maintaining a comfortable driving characteristics. Stabilizer bushing he actively help in this.

The Stabilizer is made in the form of a metal rod and has spring properties. Sleeve of front stabilizer are installed approximately in the middle (depending on design) and is made of rubber.

 the Middle portion of the stabilizer is fastened to the bodywork or a beam. Has a U-shape. Ends by hinged struts (popularly referred to as bone), attached to the suspension elements, often to the levers.

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Now consider what the bushing. Bushing, in the context of stabilizer – the mating part. That is, it is their inner bore is worn on detail (an example is the grip hand), it is put outside the fasteners and bolted to the rigid element (in our case, the car body or beam of the suspension). Result: the stabilizer is rigidly fixed, but because of the sleeves has the ability to “float”, performing their duties.

Stabilizer Bushings when worn can annoy unpleasant thud. How to avoid it?

The Transverse stability of the vehicle is extremely important, especially when cornering. If, for example, does not take into account the speed entering the turn, the car could easily roll over. Of course, if driving a “daredevil”, the car may not be saving even the most new-fangled system of exchange rate stability. When you change the trajectory, the machine leans in the direction opposite to the rotation. There is a risk of tipping over. While one wheel is more loaded than another. It follows that the more loaded wheel should “support”. This function is assigned to the stabilizer. Stabilizer bushing, in turn, provide him a “floating rotation”, to avoid rupture of metal overload.

The Stabilizer is a very reliable element in the suspension of the car. Because he sees variable loads, related parts wear out. The replacement of defective parts on new it is advisable to perform regular maintenance, without waiting for their complete destruction. Stabilizer bushings, , provided they are of good quality, are long enough, about 10000 km. But I can remind myself before a characteristic rattle. To be frightened it is not necessary! But to delay the decision of a question is not worth it. Replace stabilizer bushings you can perform yourself. High qualification and rich plumbing experience is not required. But be sure to read the manual on car repairs. It is also not less important to find and purchase bushings high quality, thus as excluding the probability of their premature wear.


Article in other languages:

AR: https://tostpost.com/ar/cars/21183-talk-about-stabilizer-bushing.html

BE: https://tostpost.com/be/a-tamab-l/38763-pagavorym-pra-tulk-stab-l-zatara.html

DE: https://tostpost.com/de/autos/38326-sprechen-sie-ber-die-buchsen-des-stabilisators.html

ES: https://tostpost.com/es/coches/38065-hablaremos-sobre-la-manga-del-estabilizador.html

HI: https://tostpost.com/hi/cars/22785-stabilizer.html

JA: https://tostpost.com/ja/cars/20851-talk-about-stabilizer-bushing.html

KK: https://tostpost.com/kk/avtomobil-der/39131-s-ylesey-k-pro-stabilizator-t-lkeler.html

PL: https://tostpost.com/pl/samochody/40754-porozmawiajmy-o-tuleje-stabilizatora.html

PT: https://tostpost.com/pt/carros/40424-vamos-falar-sobre-o-buchas-do-estabilizador.html

TR: https://tostpost.com/tr/arabalar/35610-hakk-nda-konu-mak-bur-sabitleyici.html

UK: https://tostpost.com/uk/avtomob-l/39541-pogovorimo-pro-vtulki-stab-l-zatora.html

ZH: https://tostpost.com/zh/cars/40737-talk-about-stabilizer-bushing.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

The product of the merger of two automotive cultures. Chevrolet Niva. Reviews

The product of the merger of two automotive cultures. Chevrolet Niva. Reviews

the Legendary car of the Russian automobile industry since its inception has won a lot of fans and admirers around the world. The unique design of the Russian SUV allowed him not only to be unmatched all-terrain ability, but to wi...

Nissan Qashqai: feedback as a stimulus for the model

Nissan Qashqai: feedback as a stimulus for the model

Japanese automakers carefully monitor the competitiveness of their models. Having already won a lot of fans and admirers, continues to gather Nissan Qashqai reviews from satisfied owners. The car since its inception, in addition t...

Citroen C4 owner reviews

Citroen C4 owner reviews

Meet the new Citroen C4! The reviews generally quite positive, though not quite brilliant. Good impression of its powerful and efficient engine, large cabin space and improvement of quality in General. However, there are a few det...

Adjusting the valves

Adjusting the valves

Incorrectly adjusted engine valves of VAZ-2101 can lead to irreparable consequences. First and foremost, the loss incurred directly by the motorist who will suffer from the increased fuel consumption and loss of dynamic performanc...

Ford Fusion - reviews against the practice

Ford Fusion - reviews against the practice

it Is necessary to note that the European model of the Ford Fusion looks nothing like the us. It is slightly inferior in its dimensions, and other equipment. Well, it's no wonder, because the people of different Nations hold diffe...