How to remove the pedals from the bike: a practical guide

Removing the pedals from the bike may be required when the crunch, knocking, and other unpleasant situations during the drive. To eliminate such problems is difficult. However, once you understand how to remove the pedals from the bike, you can make them regular maintenance, without the services of specialists.

Walks on two-wheeled transport has a beneficial impact on health. But it is almost never utilized muscles of the shoulder girdle. Maybe that's what forced the developers to reinvent the wheel with pedals on the steering wheel. In addition to the uniform load almost all the muscles of the body to move such vehicles can be more impressive speed. The owners of such “iron” horses also need to figure out how to remove the pedals from the bike.

Design pedals

This item represents the element of the system, which consists of a set of stars, a pair of connecting rods, carriages, axles, bearings, bearing platform and accessories. To better understand how to remove the pedals from the bike, let's take each part separately.

1. Axis – built-in rod metal rod. Acts as the basis on which hold the other elements of the structure.
2. Rod – detail, which on the one hand connected with the axle, and on the other – with a freely rotating platform.
3. The Node bearing – design, which provides smooth running system.
4. Platform – a node that acts as a support for the foot during movement and is connected with the axis by the connecting rod.
5. Accessories – metal fasteners for fixation of all components of the pedal unit. Completely disassembled during disassembly.

Types

According to the nature of the reference standard and allocate platform pin pedals for bike mount. The first provides a grip to the sole of the cyclist due to the textured surface. Second contain recesses which are connected with the corresponding tabs on the footwear.

Recommended

Professional figure skates: review, views, and reviews

Ice skating is popular with many. But if you do it professionally, you will need the proper equipment. First and foremost, professional figure skates, which have to meet certain requirements. Before I talk about the most popular brands of this mercha...

Spinner for pike with his hands. The most successful turntables on the pike. The best turntables for pike

The Most effective bait when fishing for pike is considered a spinner. Type it is vertical, oscillating, and rotating. While all of these lures has one goal: the imitation of a fish.All about turntablesthis type is characterized by an absolute unique...

Telescopic fishing rod for fly-casting

Modern rods are composite structures of glass or carbon tubes-knees, having the shape of a cone or cylinder.When choosing a rod professionals pay attention first and foremost on their basic parameters: weight, material, length with stiffness. However...

The type of platform depends largely on the method of dismantling. Contact arrangements are more complex structure. So to remove them is somewhat more complicated compared to standard products.

There is also a combined version of the pedals. The latter contain on one side of the platform regular platform, and on the other – contact.

Tools

In the course of work can be useful the following tools:

1. Manual key-allows access to the screws and disassemble the connection.
2. Bike set – acts as a universal solution when performing various repair procedures.
3. Open-end wrench – suitable for dismantling the pedals on almost all models of bikes.
4. A Special key for the system – allows you to remove non-standard nuts.
5. Puller – essential if you want to work with contact pedals. Allows you to lock the axis when using manual key.

How to remove the pedals from the bike?

First we need to arm Cycling the key, long enough to create a suitable lever. Placed the tool in position parallel to the connecting rod. The key turns in the desired direction (right pedal – anti-clockwise for the left – for the hour).

The Use of special Cycling the key will allow you to quickly remove the connection by pushing the lever with all my body. If the pedal refuses to work loose, in that case it is necessary to heat the junction of the platform and connecting rod, using a torch. You need to keep in mind that heating is performed while cooling the metal with water. Otherwise, there is a probability of final details of the damage.

How to return the pedal in place?

To install the pedals, it is necessary to clean contamination from the threads on the pin joints of connecting rods and platforms. Further, it is sufficient to take the right pedal and tighten it according to clockwise direction. The tightening is to be done first by hand and later using the key. At the end of the pedal must be firmly tightened.

A Similar operation is performed with the left platform and the connecting rod. Only the rotation should be made in the opposite direction. Finally worth the extra time to tighten and securely lock the pedals with the manual key, which will eliminate arbitrary unscrewing while riding.

In summary

As you can see, dismantle and refitting of the pedals of the bike are quite simple. However, the process should be approached head-on, taking care of all the necessary tools and not forgetting about possible problems that may arise during the procedure.

Not to confuse myself once again with the problems of removing and dismantling the structure of the pedals, sufficient to constantly maintain a functional unit in good condition, producing its regular lubrication and cleaning from impurities.