Manufacturer of fishing tackle with your hands

Manufacturer of fishing tackles – it's not only useful but also fascinating hobby. In addition, fishing on self-made gear will bring a lot more fun than those that were store-bought. Manufacturer of fishing tackle with your hands excites the desire to make something useful to fool clever fish, in addition thus you can save considerably.

Manufacturer of tackle for carp

Karp is quite tricky fish, so you must carefully prepare to return home with a decent catch. The most popular tackle for carp is a balalaika or postavish. To make such a tackle for carp with their hands quite simple. Thus it can be applied at different depths and for different forces. For the manufacture of gear will need a piece of Styrofoam, fishing line 0.4 mm thick, nylon thread, sinker weighing about 150 g with a small hole, hook, carabiner, knife, duct tape, and a piece of plastic with a length of 4 cm

The Production of gear takes 15 to 30 minutes. As float is the foam, which has a locking mechanism. To float you must bind the fishing line at the end of which is fixed a lead balloon. The weight of the load depends on the strength of the flow, so it is best to bring several pieces of different size. The hook should be mounted on a fairly long leash. To tackle such as bait it is best to use boiled peas.

Manufacturer of tackle for carp

For catching carp, it is important to carefully select gear. For this kind of fishing used equipment of different manufacturers and models. However, in some cases it makes sense to make the tackle on the carp with their hands. In this case, it is possible to consider all peculiarities of fishing in the pond of a certain type. Most often used float tackle. However, for some types of reservoirs can be used and bottom. In the manufacture of tackle is very important that all its elements were quite strong, but at the same time elastic.

Recommended

Professional figure skates: review, views, and reviews

Ice skating is popular with many. But if you do it professionally, you will need the proper equipment. First and foremost, professional figure skates, which have to meet certain requirements. Before I talk about the most popular brands of this mercha...

Spinner for pike with his hands. The most successful turntables on the pike. The best turntables for pike

The Most effective bait when fishing for pike is considered a spinner. Type it is vertical, oscillating, and rotating. While all of these lures has one goal: the imitation of a fish.All about turntablesthis type is characterized by an absolute unique...

Telescopic fishing rod for fly-casting

Modern rods are composite structures of glass or carbon tubes-knees, having the shape of a cone or cylinder.When choosing a rod professionals pay attention first and foremost on their basic parameters: weight, material, length with stiffness. However...

Weight carp can reach 4 kg, so it is very important to use a quality reel and strong fishing line. It is possible to make such a tackle on the carp with their hands, as a plug rod. For this rod it is necessary to use a coil of impressive dimensions. You can use hooks of different sizes, but they must be strong enough to withstand the big fish.

Manufacturer of gear «rubber»

Feature tackle “rubber band” is that the cargo is attached to a special shock absorber rather than directly to the line. Consequently, the elastic band can stretch, so you can remove the hooks from the water, throwing the sinker. Made the tackle “rubber” with his own hands just. This requires a fishing line, hooks, sinker, and of course gum. In addition, you would need more elements, for example, bell and carabiner with swivel. To calculate the required length of the bands, note that it is stretched four times. The length of leads is about half a meter. While it is best if the shortest leash will be closer to the elastic band. The line have to be sufficiently durable, with a diameter of about 0.4 mm. For fastening the fishing line to the elastic band, it is recommended to use a carbine. For distance casting you should use a sinker weighing about 1 kg.

This tackle allows you to catch both peaceful and predatory fish. Moreover, it is quite simple, so to use a rubber band can even novice fisherman.

Fishing Tackle “Killer carp”

Popular tackle “Killer carp” — is a combination of load feeders. You can make the tackle for fishing with your own hands that will not yield the quality and functionality of the factory.

This gear to do just enough. This will take 3–5 feeders, which will work as cargo, thick line or cord, hooks and fishing line. The feeders must be attached to a braided cord or a thick enough line. In this case they should be placed at a distance of 20 cm from each other. The last trough should be the heaviest. If they are all the same weight, at the end of the rope necessary to hang the sinker. Thus, the snap-in will not be tangled when casting.

The Hooks are attached on a leash which length shall not exceed 6 cm hook Size is selected depending on the species of fish. Manufacturer of fishing tackle with your hands takes about half an hour and does not require special tools and expensive materials.

The benefits of homemade gear

1. Savings. Manufacturer of gear with your own hands is much cheaper than buying branded equipment. You can use available materials, which have each fisherman.
2. Functionality. You can make gear, ideally suited for a particular type of fishing in the pond, which has a certain depth and force of the current.
3. Pleasant leisure. Manufacturer of fishing tackle with their hands – it is also a fun pastime that can bring more fun than fishing.