Instructions: reviews. Instructions: user manual, installation

Date:

2018-03-23 07:23:22

Views:

551

Rating:

1Like 0Dislike

Share:

Table of contents:

On average, the heating season in Russia lasts about 4-5 months, and in some regions continues until 10. All this greatly complicates the lives of truck drivers who are constantly on the move over long distances. Every new startup and engine warming becomes a real problem. Early to maintain heat in the cab, many truck drivers simply left the engines wound up for the night. Now, however, with the current fuel prices, it seems expensive. Fortunately, nowadays there is a special “avtonomki” - heaters, which operate separately from the internal combustion engine. As you already understood, today we will focus on the system “instructions”. Owner reviews and the device of this “avtonomki” - further in our article.

Characteristics

“instructions” is a stand-alone heater, which can operate with the engine off. It is connected directly to the cooling system, and therefore can function as a glow plug heater. Thus, “instructions” keeps heat in the cockpit for a sufficiently long period and at the same time does not allow the engine to cool. feedback WebastoIn the parlance of this heater is called “hair dryer” (due to the characteristic appearance).

Device

Each “independence” is a whole heating system, which consists of many structural parts. Among them should be identified such as:

  1. The Blower of the heating air.
  2. The control.
  3. Burner with evaporative pad.
  4. Chamber.
  5. Timer with ability to set specific temperature of heating.
  6. Parts of the seal.
  7. The heat Exchanger.
  8. Parts of a fence of fuel and air for combustion.
  9. Output Device exhaust.
  10. Pin bulbs.
  11. Stop heating.
  12. Switch.
  13. Temperature Gauge.
  14. Engine supercharger.
  15. Fuel pump.

Working Principle

As we said earlier, connects “hair dryer” directly to the standard engine cooling system. It is based on, and heater and motor. But how exactly does the heater “instructions”?

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

After switching on, the heater takes fuel from the tank which passes through a separate fuel pump on its own highway and into a chamber where the combustion is without an open flame. Next, from the effect of heating the temperature of the heater pins. The system then turns on the coolant pump that mimics the default (regular). While the heated antifreeze through the radiator and all the channels, the details of the engine gradually warms up. As soon as the coolant is heated to a temperature of 40 degrees Celsius, electronics connects the fan to the stove. After that, the interior begins to flow warm air.Webasto diesel reviews

At the end of the cycle (when the temperature in the cabin reaches a predetermined level) the system turns itself off. Also the driver can set the “maintain” (modern “avtonomka” this function is performed automatically). In this case, the heater is “instructions” to maintain the temperature of the coolant in the range of 65 to 80 degrees Celsius. Thus, when the work “avtonomki” we get warmed up engine and warm interior.

Where to use this system?

Basically “hair dryer” mounted transport companies and owners of large vehicles involved in the transport of goods over long distances. On cars same cars with all these tasks copes standard stove. Its power is enough to heat the cabin long enough (without taking into account domestic cars). Although the company produces a Webasto heaters for such vehicles. System of “instructions” to install aspire drivers buses with the aim of creating of more comfortable conditions in the cabin.

How much will change the fuel consumption?

The auxiliary heater is “instructions” is highly economical in terms of consumption of diesel fuel. If used regularly, the fuel consumption will increase by only 3-4 liters. That is, if in the summer the truck consumes 35 liters “hundreds” in the winter this figure will increase to 39. It is clear that the consumption of “avtonomki” does not depend on the machine speed and load. 1 hour of operation auxiliary heater "Webasto" consumes 0.5 liters of fuel. Per day to maintain normal temperature in the cabin, you need to enable "Hairdryer" for 6-8 hours. The rest of the time, which is more than 16 hours, the temperature in the cab holding steady within 20 degrees Celsius.

Advantages

During the installation of the auxiliary heater "Webasto" do you solve several problems at once. First, you have the opportunity easy engine starting regardless of ambient temperature. Secondly, thanks to the work of “hair dryer” in the car is always holding steady at a comfortable temperature. As the reviews say, “instructions” you can turn in the distance, with the help of special remote key. This is a big plus. Thirdly, the presence of “instructions” to reduce costs associated with fuel consumption, warm up the cab and engine.Webasto heater

It Should be noted that all of the above benefits are possible only in case if the heater is “instructions” was installed correctly, with all the necessary requirements and technologies. And this is possible only in specialized workshops. To establish “instructions” with their hands, but nobody will give a guarantee that the system will work correctly.

How to find a good firm-installer?

In order to select bona fide masters, you need to pay attention to the reputation of the workshop. Now you can find a lot of information about these firms and browse testimonials clients. But here we must mention a small point. Sometimes firms-installers simply buy reviews, assembling a group of people who write only positive information about a particular office. Conversely, the reputation of one company can spoil the other. In the same way its competitors are writing negative reviews about this company. Well, to determine whether or not this review was written by the client or it was a “paid”, is very difficult. Therefore, when choosing the installer, be sure to pay attention to the following points.

  • Any firm engaged in the installation of heater must have a certificate for the installation of goods of a specific brand (in this case the products of “instructions”). To install a particular system the company has the right only in case if the permission has not expired and is not fake. Please note that this certificate is issued to firms strictly for 1 year (then it will be canceled or extended depending on the decisions of managers of firms). If this documentation does not expire, know that it is fake. To contact such a company should not be.
  • Each company installer of heater has a numbered warranty certificate of the Russian sample. This is the main document confirming the authenticity of the company and its ability to properly install the system “instructions” on the diesel. The experts say that checking a particular firm for honesty on the official website webasto.ru. There is a full list of services recommended for the installation of self-contained heaters of this brand.
  • When selecting a company pay attention to the cost of the system “instructions”, which they sell. It should be approximately the same in all regions of the Russian Federation, as regulated by the official representative of Webasto Rus. The difference may be is that the cost of the works produced at the plant, which is determined by the company by the installer.

Which model?

After selecting a good workshop should determine the model of the installed heater. Make it easy. If the volume of the engine of your car is less than 2 litres, for normal heating of the cabin is enough to install a cheap heater “the Webasto ThermoTop E”. The capacity of this unit is 4 kW. As the reviews say, “the Webasto ThermoTop E” copes with its functions and can stably keep a comfortable temperature inside the passenger car.Webasto install

If the volume of your engine more than 2 litres, you need to use the heater «Webasto ThermoTop the EVO5”. Its capacity is 5-5,2 kW.

How is the installation?

Installation of the auxiliary heater is made in several steps. Initially, the device connects to the standard engine cooling system, along which there are special hoses. Further, the heater is connected to the onboard network, and fuel lines. To ensure that the heater did the fuel tank is mounted on special booster pump. The intake fuel goes in the tank. Thus, the scheme of installation is very simple – first "Webasto" connects to ODS, then to the fuel line.

It Should be noted that failure to comply with technology installation, the system may not work correctly.

“instructions”: application manual

Despite the similar construction and the device, each auxiliary heater has different instructions and a separate control method. So, how to use “instructions”? In the instruction of this heater has all the necessary information and recommendations for use. The main demand of the manufacturer-avoid mechanical shock elements of the system. Also should not be exposed to “instructions” exposure to corrosive materials and electrical discharges.

In the instructions the manufacturer says that the system is very demanding temperatures and humidity. But as the reviews say, “instructions” can be used in any weather. As far as overheating, the system switches off when the temperature reaches the specified driver.

What really needs attention is the compliance with the designated operating system. Use “hair dryer” only need in open spaces. If the machine is in a closed warehouse or garage, similar to the situation with motor running, there is a risk of suffocation. As we said earlier, this system has its own separate internal combustion engine, and because the work emit exhaust gases.Webasto instruction manual

At the station “instructions”, as well asthe ignition on the car, you need to turn off. Moreover, if the system began to emit a characteristic noise, odor or even smoke, remove the fuse and lock it. Here, the manufacturer recommends that you take the device to the diagnostic service. A lot of the requirements expressed in the user with regards to used fuel and coolant. Also, the manufacturer recommends prevention device in the non-working season. It is as follows. Once a month the system is activated when the engine is cold at minimum capacity of the fan and operates in this state, about 8-10 minutes. According to the manufacturer, this measure is required. Regular preventive maintenance will help to avoid damage when the system is “instructions”.

Application instructions contains detailed information on the rules of operation of the heater. It is not recommended to leave the system running for more than 1 hour. After this time you should take a short break (a minimum of 30-50 minutes), after which you can re-enable the heater.

To avoid frequent battery drain after turning off the “instructions”, it is recommended to leave the motor in working condition for another 3-5 minutes.

It Is necessary to distinguish operating modes of the system. The instructions state that the heater works in 2 modes: winter and summer. In the first case, the system heats the antifreeze and operates as a pre heater. In the second “instructions” only ventilates the interior, while the cooling system is not further heated.

Methods of control

There are several ways to control the heater:

  • Built-in timer.
  • Mobile phone.
  • Remote control (in this case the management of “instructions” happens remotely).

Let us look at the characteristics of each of them. So, the timer. This method of control is the cheapest and easy to use. This device will cost you about 3 thousand rubles. auxiliary heater WebastoThe timer is Mounted in the car and works in a strictly specified mode, which picks the driver. Here is set the temperature to where you need to heat the cabin. The heating time also is set by the driver. The entire system operates from 10 to 60 minutes. As the reviews say, “instructions” for this period is able to warm even the most frozen engine.

With the help of mobile phone you can also activate this system. However, for this you need to have a special GPS unit ThermoCall. It costs 14 thousand roubles. Additionally, the cab is the antenna that catches the signal from your phone. To activate the “instructions” you can anywhere in the world. It is enough to send SMS to a number assigned to your system “instructions”. However, judging by the reviews, this method of control is meaningless and very expensive, because basically the driver activates the system from inside the cabin. And it is quite possible to do with the mini timer.

The remote control can be purchased for 10 thousand rubles. The distance from which the system can be operated, up to 1 kilometer. At the same time on the remote, you can set the time of operation of the system. This option is great for those who leaves the car near his home. While you eat, the system for a few minutes will automatically warm up the interior and engine. You just have to sit in the car and start the ignition key.

The cost of the system in Russia

The Price mainly depends on the power of the heater. For example, a low-power heater installed on passenger cars, can be purchased for $ 400 (about the same cost and installation of “instructions”). Drivers say that the installation is better done independently, retaining the warranty and regular maintenance of the system.installation instructions reviews

“instructions” for trucks is from 1000 to 1800 dollars. Often companies offer heaters since the installation, meaning you do not need to order them and wait for delivery. The price for “hair dryer” with installation ranges from 900 to 2000 dollars. So much now is ready to install "Webasto" diesel. Reviews say that, despite the high cost, this system brings great benefit to the car. Especially good is the fact that on heating of spent 5-6 litres per hour, and only about 0.5-0.6 liter of fuel.

So we figured out how to use the “instructions”, what is this system and how it works.


Article in other languages:

AR: https://tostpost.com/ar/cars/12926-instructions-reviews-instructions-user-manual-installation.html

BE: https://tostpost.com/be/a-tamab-l/23149-vebasto-vodguk-vebasto-nstrukcyya-stano-ka.html

DE: https://tostpost.com/de/autos/23153-vebasto-g-stebewertungen-vebasto-die-anweisung-die-installation.html

ES: https://tostpost.com/es/coches/23171-vebasto-los-clientes-vebasto-la-instrucci-n-la-instalaci-n-de.html

HI: https://tostpost.com/hi/cars/12945-instructions-reviews-instructions-user-manual-installation.html

JA: https://tostpost.com/ja/cars/12950-instructions-reviews-instructions-user-manual-installation.html

KK: https://tostpost.com/kk/avtomobil-der/23141-vebasto-p-k-rler-vebasto-n-s-auly-ornatu.html

PL: https://tostpost.com/pl/samochody/23097-vebasto-opinie-vebasto-instrukcja-instalacji.html

PT: https://tostpost.com/pt/carros/23096-vebasto-viajante-vebasto-uma-instru-o-de-instala-o.html

TR: https://tostpost.com/tr/arabalar/23148-vebasto-g-r-ler-vebasto-el-ile-y-kleme.html

UK: https://tostpost.com/uk/avtomob-l/23127-vebasto-v-dguki-vebasto-nstrukc-ya-ustanovka.html

ZH: https://tostpost.com/zh/cars/13697-instructions-reviews-instructions-manual-installation.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Off-road car

Off-road car "the Ataman" GAZ-2308: overview, specifications and reviews

the Russian car industry can not boast a large number of SUVs, but a few interesting models. One such model was the car "the Ataman" GAZ-2308. The car is a four-wheel drive pickup truck, based on the platform “elder brother&...

Model of UAZ 3165: characteristics and features

Model of UAZ 3165: characteristics and features

UAZ-3165 "Simba" is a light-duty van of the new generation intended for transportation of people and cargo on poor roads. He is able to move quickly not only on unpaved roads, but where the path is not observed. To produ...

Hyundai Tiburon, reviews and features

Hyundai Tiburon, reviews and features

Hyundai Tiburon – three-door hatchback, which was manufactured by a Japanese company Hyundai from 1996 to 2009. During this period, was released on 3 generations of machines, different size, design and configuration.Hyundai ...

Service auto sales CarPrice.ru: customer reviews

Service auto sales CarPrice.ru: customer reviews

Business car there are many years, successfully flourishing in many countries. In Russia also there are companies that are engaged in buying and selling vehicles, thus earning for used cars.In today's article we will talk about on...

Cabin air filter

Cabin air filter "Renault Logan": the replacement, installation and price

the Cabin filter – this is one of those details, without which it can not do any modern car. This element prevents contamination of the air in the cabin, but since the concentration of dust on our roads is very large, it is ...

Why do I need to paint calipers and how to make it?

Why do I need to paint calipers and how to make it?

painting the caliper is a set of paint works to improve the appearance of the part and its further protection from corrosion. Usually the material for these works used special paint resistant to aggressive environments and large t...