Stabilizer bar "Renault Logan": description, installation, replacement

Date:

2018-04-02 07:08:18

Views:

1118

Rating:

1Like 0Dislike

Share:

Table of contents:

Many Russian motorists prefer the French auto industry in the face of many models, including the Renault Logan. Responsible drivers try to properly care for their vehicles in a timely manner conducting maintenance. Not the last place here is the suspension of the car and the stabilizer bar ("Renault Logan" (SPU), in particular, consider the article).

the Stabilizer Renault Logan

To diagnose the undercarriage is not as difficult as it might seem at first glance. Special and expensive equipment is not required, just the minimum skills and knowledge.

But what is this the SPA? As practice shows, not all drivers even know what that detail is. Have to fill these knowledge gaps.

Pleasant problem for car owners

Use of the private car has a significant advantage. Modern life accelerates the pace and to have time everywhere and anywhere becomes problematic. For this reason, many people acquire cars which are becoming more and more. In this regard, transport has ceased to be a luxury item, currently, for many people this is the first necessity.

However, everything nice has its downside. To keep your car in working condition, you must have a decent budget to buy the same stabilizer, "Renault Logan", for example, and strong nerves.

But the catch is still not in the financial plan, there are technical issues. Any vehicle, especially modern models are complicated and still not very experienced driver yet to understand what was happening. But over time, being interested in many details, you can gain invaluable experience. This will eliminate a fault yourself, without the help of specialists.

What is the SOUP?

In fact, the stabilizer bar is a connecting part that connects the opposite wheels. And because it is experiencing a substantial load, it must be sufficiently elastic. For this reason, currently, such details are of torsion type.

installing the stabilizer bar on the Renault Logan

The design of the stabilizer bar on the "Renault Logan 2" made in the form of rods of circular cross section U-shaped. Often this element is made of spring steel, which by virtue of their physical properties is best suited. Depending on the brand of car the stabilizer may take any other desired shape.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

The body part is fixed by means of rubber bushings and clamps. Thanks to this the rod can be rotated, which is connected with the peculiarities of his work. To put SPU in front or maybe the back of the car.

Need?

Now we need to concern the question, what is the need of the socialist party. The thing is that when the car enters a bend, the body lurching in the opposite direction. And the magnitude of the angle is in direct proportion to the centrifugal force and the device of the suspension.

Don't be the back or front of the stabilizer bar ("Renault Logan" has it too), would have increased the number of accidents. Statistics show that most accidents on the roads due to overturn vehicles. In other words, the drivers come in a fairly sharp turn at speed, and leave it lying on its side. Familiar with this situation? However, now it happens not so often because all the SPU.

Stabilizer bar for Renault Logan 2

Consider the case with independent suspension of the car. When he executes a turn, the wheels on one side loaded more than the other, which also, Vice versa, are unloaded and strive to break away from the road. Here it affects all of the benefits of SPU. It evenly distributes the load between the opposite wheels. That is, the torsion bar unwinds, one part is raised and the other lowered. This reduces the roll angle and the vehicle maintains a level position.

Note, rod of stabilizer bar "Renault Logan" to resist the loads only in the transverse direction. Vertical (check both wheels in pit) and angular fluctuations of a he does not.

Drawbacks stabilizer

With all significant benefits SPA, it has several drawbacks:

  • Presence of this element in the design of the chassis of the vehicle negates the properties of an independent suspension.
  • Setting the stabilizer on the SUV will adversely affect its permeability. There is a risk of hanging the wheel on the left.
  • If the rear of the car will be set overly rigid connection with the wheels, it is also bad for understeer.

To Eliminate these shortcomings can only be this is due to the complexity of the design. For example, some SUVs stabilizers if necessary disabled.

the Stabilizer Renault Logan article

There is Also a radical method-adaptive suspension, which is without any stabilizer. "Renault Logan" this isnot threatened. Unfortunately, this is true only for models of business class.

Caveat

Not every car Renault Logan is present the stabilizer front or back. For continuous beams, what is the rear suspension, the bar is installed without racks. The vertical oscillations is negligible and transverse loads saves horizontal rod, which is fixed on the axis.

Sometimes the front of the vehicle may not be a stabilizer. In many ways, the presence of this element is optional. And according to the manufacturer, this does not affect driving safety.

However, many drivers do not want to exploit the "Renault Logan" without the stabilizer bar and install it yourself. Only here it is worth considering that if the car is still under warranty, in the course of any intervention in the design of the vehicle it is automatically canceled.

According to most experts, the presence of SPU in the suspension of the vehicle it is advisable for frequent trips out of town. In the case when the transport is operated mainly in urban areas, the big difference is whether there is torsion or not, you can not feel.

Diagnostics SPA

The Stabilizer is difficult to diagnose, and therefore very difficult to determine, it is necessary to replace the entire element, or just its bushings or other parts. If there is any malfunction, published by the knock can be confused with the sound of the ball joint of the lever, dilapidated. Some other signs can indicate problems in relation to the steering rack.

Front stabilizer bar Renault Logan

Before thinking about installing a stabilizer bar on the "Renault Logan", is carefully to inspect the suspension to determine the presence of backlash. You will need a tire iron, which needs to be overcome the counter. If you were able to do it – SPU to be replaced.

However, this method of diagnosis is not always fruitful. Then remains to remove the stabilizer and take your time to view each joint. If it is worn, it is easy to move my arm.

The failure of the bushings SPU – not uncommon and unpleasant. Often, these elements are ground or even burst. This is reflected in the shaking of the car when driving over any bumps. In addition, the body is constantly roll, which is not good.

You should Not ignore the obvious signs of faults, SPU or its parts, as this can result in not only unreasonably high costs. Perhaps, over time, will have to repair the entire suspension.

Preparing

If the condition of torsion has been identified does not make sense to contact the nearest HUNDRED. All the work can be done independently, it is necessary only to prepare everything you need. The article of the stabilizer bar "Renault Logan" – 6001547137. Among the tools you will need:

  • Wrench type 10 and 13;
  • Key T40 (Torx);
  • Head of 18;
  • Jack;
  • Stand.

After everything is prepared, you can go directly to the procedure.

The SPA

Work can be done alone, but much better to enlist the support of friends or acquaintances. Then everything will go smoothly and will not get bored.

Renault Logan without stabilizer

The Whole procedure can be divided into several stages:

  1. First you need to lift the front of the vehicle, and the bottom of the subframe to install the stands for insurance. Without this it is impossible to do if you need to remove the entire rod and not just her rack.
  2. To Remove protection all threaded connections process a special tool WD-40 (liquid wrench).
  3. Next you need to Unscrew the nut from the bolt which held the front of the SPU, and the fasteners out through the shims, and a hammer.
  4. You can then proceed to loosen the bolt that secures the rack itself.
  5. Before removing the strut, you need to throw the brake hose from the bracket to avoid damage.
  6. You can Then remove the bushings that hold the rack. They also need to be replaced.
  7. At this stage of the replacement stabilizer on the "Renault Logan" you go to the immediate dismantling of the socialist party. Here you need to hold the nut with the Torx key. After unscrewing the bushing is removed.
  8. The next step is to Unscrew the fasteners that hold the STC at the subframe (two of them).
  9. You can Now remove the nuts, retaining brackets. Then pry off the cushion with a screwdriver and take them away. They too should be replaced.

Assembly is done in reverse order. All sleeves and bushings is recommended to be changed anyway, even if they are not damaged.

Summary

As you can see from the above instructions for replacing the stabilizer, all the work is really simple. Simply follow the sequence of actions. This once again suggests that the Renault Logan is a simple device, at least his suspension.

Replacement stabilizer bar for Renault Logan

But if there is no time to mess with the stabilizer bar on the "Renault Logan" due to a large workload, it is possible to entrust this work to specialists the garage. They will do the job quickly and professionally.The cost of the work is usually 500 rubles. Here every man for himself decides for himself, to pay for expert service or be enriched by the experience. In any case, the owners of the machines will not regret it.


Article in other languages:

AR: https://tostpost.com/ar/cars/7754-stabilizer-bar-renault-logan-description-installation-replacement.html

BE: https://tostpost.com/be/a-tamab-l/13850-stab-l-zatar-papyarochnay-ustoyl-vasc-reno-logan-haraktarystyka-stano-.html

DE: https://tostpost.com/de/autos/13855-querstabilisator-renault-logan-eigenschaft-montage-ersatz.html

ES: https://tostpost.com/es/coches/13863-barra-estabilizadora-renault-logan-caracter-stica-de-la-instalaci-n-su.html

HI: https://tostpost.com/hi/cars/7759-stabilizer-bar-renault-logan-description-installation-replacement.html

JA: https://tostpost.com/ja/cars/7756-stabilizer-bar-renault-logan-description-installation-replacement.html

KK: https://tostpost.com/kk/avtomobil-der/13854-t-ra-tandyr-ysh-k-ldene-t-ra-tyly-yn-reno-logan-sipattamasy-ornatu-auy.html

PL: https://tostpost.com/pl/samochody/13846-stabilizator-renault-logan-charakterystyka-monta-wymiana.html

PT: https://tostpost.com/pt/carros/13842-a-barra-estabilizadora-renault-logan-caracter-stica-a-instala-o-a-subs.html

TR: https://tostpost.com/tr/arabalar/13856-sabitleyici-denge-ubu-u-renault-logan-zelli-i-montaj-yedek.html

UK: https://tostpost.com/uk/avtomob-l/13852-stab-l-zator-poperechno-st-ykost-reno-logan-harakteristika-ustanovka-z.html

ZH: https://tostpost.com/zh/cars/8459-logan.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"Nissan Note": specifications

"Nissan Note" in the land of the Rising Sun made commercially since 2004. Production kompakten favorite city in the UK established in 2006. What conquered the British, this small car, why they chose it? Get behind the wheel &ndash...

IZH 2125. Technical characteristics of IZH 2125. Reviews, prices, photos

IZH 2125. Technical characteristics of IZH 2125. Reviews, prices, photos

the appearance of the car at the light was a consequence of the General trend in Europe to manufacture family cars. The first family car in European countries came off the Assembly line in 1965. Model Renault 16 shocked the Europe...

Scooter Suzuki - Japanese quality and reliability

Scooter Suzuki - Japanese quality and reliability

In the light of motorcycles Suzuki Motor Corporation is the undisputed leader. The reputation, the years, perfect quality, safety and reliability – the calling card of their products. It is also worth noting that all vehicle...

The car

The car "Lifan Murman" - owner reviews, specifications and features

the New sedan of business class Lifan Chinese company recently appeared on the Russian market. Car Murman was developed specifically for Russia.a Large and roomy “Murman" length 4.9 meters has caused a lot of controvers...

Oka is a Russian subcompact passenger car. Description, specifications, characteristics

Oka is a Russian subcompact passenger car. Description, specifications, characteristics

In the late 80-ies of XX century in the USSR have become popular subcompact cars. In the USSR at the time, debuted the legendary “brand”, which became truly popular and are available for each car. Started the productio...

Tyre Tigar Sigura Stud reviews

Tyre Tigar Sigura Stud reviews

From the fact whether the motorist to choose a winter tires, depends on how he can secure and safe feel on the road. Correct that it is impossible to approach to this choice carelessly, but don't get too hung up on it. To help in ...