What is the better starter - gear or conventional? Distinction, principle of operation and device

Date:

2018-03-28 04:24:17

Views:

582

Rating:

1Like 0Dislike

Share:

Table of contents:

Technological progress does not stand still and is constantly evolving. Every year new technology that allows engineers to improve or create completely new details. This applies to engineering. In Russia annually sells hundreds of thousands of modern machines. Each of them contains the latest technology. We will talk about such a small site as the starter, and figure out which starter is better: gear or regular.what is the better starter gear or the usual

General information

The First starter used on the car, had a number of disadvantages. Over time, the design was gradually improved and significantly changed. The starter is a 4-band motor that needed to rotate the crankshaft when starting the motor. It takes the energy from the battery, increases the starting current. Due to this and running any internal combustion engine. The principle of operation of starter for many years has not changed.

However, constantly improved its design. Reduced mass of parts, increased service life through the use of better quality and new materials, etc. All this led to the fact that the starter is quite transformed and there was even a new type of gear. This is what we now discuss.

Classic starter motor: principle of operation and device

A Key feature of this device is that there is no such intermediate node as the reducer. This allows directly from the starter motor to transmit the rotation to the crankshaft. Therefore, the device is simpler to manufacture and much easier to repair. Another feature of this starter that enters the switch the electric current allows you to instantly enter the engaged gear and the flywheel. This contributes to the fact that the car starts, as the drivers with poltychka.where is the starter

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

Currently, trying to replace those starters on reducing. However, most of the cars were set earlier is a classic starter. The principle of operation and the device has made this site extremely tough. These units almost never fail due to electrical effects, but more often go to repair because of the low temperatures.

Design and something else

During operation of the internal combustion engine produces a sufficiently large amount of energy. It is enough for lights, music, wipers, etc. In General, during the movement of the main load is on the generator. In a static position the motor does not produce anything, so it must somehow make. To do this, and use different types of starters along with battery.starter working principle and deviceThe motor, that is, a housing formed in a cylindrical shape. There are cores, and exciting windings. Of course, there is the anchor - one of the most important and costly parts. It pressed springs reservoir, as well as cores. Has sevigney form. There is still a retractor starter relay. The price of this part is relatively small, though, and circuits performs a very important function. First, it takes the power from the ignition switch to the motor. Secondly, pushes the one-way clutch.

Often fails it is the retractor starter relay. The price benefit is available and starts from 500 rubles and ends several thousands. In addition to this design is the Bendix drive pinion and brush.

Phases of work starter

The node works in the following way:

  • Connection of the pinion with the flywheel;
  • Run the starter;
  • Disconnecting the gear and flywheel.

Of Course, that the starter operates only when the engine is started and then turned off. If not, then one of the mechanisms is faulty.

retractor relay starter price

After the driver inserts the ignition key and turns it in its working position, from the battery supplied current to the solenoid. Due to this, the Bendix gear of the starter engages the gear, at the same time, thanks to the electrical power supply to the electric motor closes the circuit and starts the car. After the engine speed exceeds the speed of our starter, he is disabled. Is only enabled when you next start the engine. And now, let's look at the different gear starter from the usual. There are a few interesting details.

Gear starter

The General principle is no different. Electrical energy is also converted to mechanical. The only difference is the presence of a reducer. In addition to this starter, there are permanent magnets in the coil, allowing to increase the reliability of the motor as a whole. Of course, there is its own characteristics. In particular, many people wonder how much a starter of this type. In most cases, the more expensive classic, but not much. An average of 10-15%. But its life is much higher, and it should definitely be considered.how much is the starterThe Duration of operation of the starter depends on the quality of manufacture of the gearbox. The better steel was used for casting gears, theless chance that the teeth slights after the hundredth run. In General, the design is popular today, and gear starters more and more.

The advantages and disadvantages of classic version

Here we actually gradually come to the answer to the question about which starter is best: the gear or conventional. For this we consider the strengths of the classic version. They are as follows:

  • Lowest cost;
  • High maintainability;
  • Find parts almost anywhere.

But there are also disadvantages, which are expressed as follows:

  • Requires a high base current;
  • Quick-wear parts;
  • Poor running at low temperature;
  • Large weight and dimensions.

In General this is a fairly robust design with proper maintenance. But the development is not in place, and this has led to more advanced gear starters. Consider their strengths and weaknesses.

Bendix gear-starter

Starter motor with gear: what is good and what he cons

We've already figured out how to work this device and what is its fundamental difference. It is not difficult to guess which starter is better, gear or conventional. The fact that the first option has the following strengths:

  • Small size and weight;
  • Long life regardless of temperature environment;
  • Low energy consumption (40% less than the classic version).

As for the cons, then they are available here and are as follows:

  • The complexity of repair works;
  • The lack of spare parts in the stores;
  • The high cost of the product;
  • Low quality gear.

Often the main cause of failure of the starter to the gearbox is that installed components are of low quality. This leads to breakdowns and various malfunctions. In General, this unit has more prospects in the future than the usual starter. And this is not due to the fact that one good and the other bad, and the scientific and technical progress.

To Summarize

If you have decided to replace this node, you will first need to decide where the starter is located. It's usually the driver's side under the engine or to the side of it. For removing you need to free up space. Depending on location you may need to dismantle protection for the engine or air filter box. Then disconnect the wires and Unscrew the bolts. To determine where the starter is located, it is easy. It has a cylindrical shape, and from it there are a few wires, fixed by nut. Everything is done simply and quickly.

how is the gear the starter from the usual

Here we answered the question of which starter is best: the gear or conventional. Classic starters are good in its own right, but is gradually being phased out. But they also have their strengths, like a gear - its weak. For example, in the province will be difficult to find spare parts for starter gear, and the usual - no problem. The same can be said about the repair - not all faced with the gears on the starter and not everyone will do it. How much is the starter gear? Depending on the brand of auto, normal will cost about 5-7 thousand rubles.


Article in other languages:

AR: https://tostpost.com/ar/cars/1474-what-is-the-better-starter---gear-or-conventional-distinction-principl.html

BE: https://tostpost.com/be/a-tamab-l/2519-yak-startar-lepsh---reduktarny-c-zvychayny-adroznenn-pryncyp-pracy-pry.html

DE: https://tostpost.com/de/autos/2517-welcher-starter-ist-besser---getriebe-oder-normal-unterschiede-arbeits.html

ES: https://tostpost.com/es/coches/2522-qu-mejor-motor-de-arranque---reductor-o-el-normal-diferencias-el-princ.html

HI: https://tostpost.com/hi/cars/1474-what-is-the-better-starter---gear-or-conventional-distinction-principl.html

JA: https://tostpost.com/ja/cars/1473-what-is-the-better-starter---gear-or-conventional-distinction-principl.html

KK: https://tostpost.com/kk/avtomobil-der/2520-anday-zha-sy-starter---reduktornyy-nemese-detteg-erekshel-g-zh-mys-ste.html

PL: https://tostpost.com/pl/samochody/2523-jaki-rozrusznik-lepiej-ukierunkowane-czy-zwyk-y-r-nice-zasady-dzia-ani.html

PT: https://tostpost.com/pt/carros/2520-que-tipo-de-acionador-de-partida-da-melhor---reduktornyy-ou-normal-as-.html

TR: https://tostpost.com/tr/arabalar/2525-hangi-mar-daha-iyi---sonsuz-vidal-veya-d-z-farkl-l-klar-al-ma-prensibi.html

UK: https://tostpost.com/uk/avtomob-l/2522-yakiy-starter-krasche---reduktorniy-abo-zvichayniy-v-dm-nnost-princip-.html

ZH: https://tostpost.com/zh/cars/1575-what-is-the-better-starter---gear-or-conventional-distinction-principl.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Bus

Bus "Bogdan": engine specifications, fuel consumption, repair

If you have ever been in major cities in Central and Western Ukraine, then you definitely could see the buses under the brand "Bogdan" or even drive on them. It is entirely Ukrainian car, and makes them unique in this country hold...

What cars collected in Russia: list

What cars collected in Russia: list

today in Russia produced over two million vehicles of different makes and models ranging from hatchbacks and ending dedcation trucks and different trucks. And a small part is based on the brands of foreign brands, which bought Rus...

Audi A6 C5: tuning with your hands

Audi A6 C5: tuning with your hands

Used cars business class is very attractive, as they allow to obtain the cost of a new budget models to high (by modern standards) level of performance. Thus, like other machines, they can be improved by tuning. One of such models...

Winch on UAZ with his own hands

Winch on UAZ with his own hands

outdoor activities has become more accessible than twenty years ago. Many thrill seekers equipped with Soviet UAZ and Niva and trying to overcome places where normal cars can not go. But even experienced drivers can get into a sit...

Backhoe loader JCB 3CX Super: specifications, user manual

Backhoe loader JCB 3CX Super: specifications, user manual

the British company JCB is known throughout the world thanks to its tracked and wheeled construction equipment of high quality. A special place in the assortment of the company is the backhoe loaders. One of the most famous models...

BMW: deciphering abbreviations, engine number and VIN, the model designation

BMW: deciphering abbreviations, engine number and VIN, the model designation

the BMW Cars are among the most popular cars in the world due to high quality and excellent technical characteristics. Today's topic is the letters and numbers – we will consider the decoding of all the symbols of this car b...