What is the engine in the car?

Date:

2019-04-14 02:20:24

Views:

599

Rating:

1Like 0Dislike

Share:

Table of contents:

The internal combustion Engine in cars – this is the main component. If the engine had not been invented, then it would be the car industry, most likely, would stay on the wheel and evolved further to the modern scale. The engine made a revolution. Let's talk about what engine, its history, structure and principle of operation.

what engine

The First attempt to create a unit similar to the internal combustion engine began in the 18th century. Many inventors from all over the world have long tried to create a mechanism in which energy from combustion of the fuel could become mechanical.

Engine

The First of what engines and how to build it, thought the brothers Niepce from France. They invented and assembled the device, which is called “pyrolator”. Fuel in this engine was made by the coal dust, but with all the efficiency of this mechanism has not received particular recognition in science and remained only in the form of drawings. “Pyrolator” had a very imperfect design. He was distinguished by high operating temperatures and huge fuel consumption at relatively low efficiency. Also, this unit consumes a lot of oil. But even then, this engine was installed on the first, even not perfect, three-wheeled cars.

Second attempt

In 1864, Siegfried Marcus, who has worked on various inventions, showed the world the first single cylinder carbureted engine. the engine driver what is itHe was driven from the energy of combustion of refined petroleum products. This engine was able to develop a significant time speed-10 mph.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

Twin-Cylinder motor of Brighton

In 1873, the engineer, George Brayton, on the basis of already existing products has created a twin-cylinder engine. At the beginning of the engine operated on kerosene, and then translated it into gasoline. Among the disadvantages of this unit was allocated too large a size.

Otto Engine

In 1876 was a major step in the history of the internal combustion engine. Nicolas Otto was able to create technically complex unit, which efficiently convert the energy of combustion of petroleum products into mechanical energy. In 1883 French engineer DELAMAR creates the motor, where the fuel could be natural gas. However, this invention is also not found response and exists only on paper in the form of drawings.

Famous name in automotive history

In 1815 on what is DVS and how it can be used, I thought Gottlieb Daimler. He is not just an efficient engine, and started the production of the prototype of modern units with vertical cylinders and a carburetor injection.

what is the engine in the car

This is the first at the time of compact mechanism, which then contributed to the development of the automotive industry.

General definition of the internal combustion engine

That is the engine in the car, you know, probably all. But the main feature of any internal combustion that the fuel mixture is ignited directly in the working chamber and not in any external media.In the process of releasing a chemical engine and the thermal energy which is converted into mechanical. On what engine, told in a physics class and the principle of operation is based on the effect of the thermal expansion of gases formed in the combustion process of the combustible mixture under pressure into the combustion chamber.

Ice Types

There are piston engine. They are most effective. This will confirm the person who has the skills of maintenance and repair of engines, – the driver of the engine. What is it? The device of this motor are the following: combustion chamber located inside the cylinder, heat energy is converted into mechanical with the help of connecting rod and piston-crank mechanism, energy is transferred to the crankshaft. what is engine iceThere are several types of piston engines. First, we note the gasoline internal combustion engine. Here, the fuel mixture prepared in the carburetor, then injected into the combustion chamber from an electric spark. This is a good opportunity to know what the engine in the car. Injection engine delivers the mixture directly into the intake manifold with special nozzles. All processes in this engine are controlled electronically. Ignition occurs from the spark.

There are also diesel units. Those who do not know what the engine in the car, is acquainted with this type of motor more. Here, the fuel mixture is ignited without the use of candlesticks. It is ignited by compressed air, which is heated to temperatures exceeding the values of the combustion mixture. The fuel is injected by special injectors.

Rotary-piston engine – this is a very interesting unit. What is the engine in a car of this type? Now such a device is quite rare. In this mechanism, the thermal energy from the combustion is transformed into mechanical with the help of working gases which rotate the rotor in the working chamber. The mechanism has a special form, profile, and moves in the "planetary" of the trajectory directly within the working chamber. The latter has also a special configuration – “8” and its – timing, piston group andcrankshaft. Now we all know that the engine in the car is almost not used.

what is the engine in the car

There are gas turbine engines. Here energy is converted into mechanical by spinning the rotor, which makes moving the turbine shaft. In the course of the improvements and experiments, scientists and engineers from around the world determined that the most efficient, reliable, simple, and economical in terms of fuel and oils – piston engine.

Other types of engines, except the piston is a distant history. Considering the question about what the engine in the car, it should be noted that the rotary-piston engine produces now only concern Mazda. Chrysler has collected several gazoturbinnyh motors, but it was a long time ago, and none of the major automakers did not appreciate these units. In the USSR gazoturbinnye engines used on some tanks and warships. But then technology and refused.

How does the internal combustion engine

For those who don't know what engine the internal combustion engine, we will consider the structure of this mechanism. In the housing of the motor together several important nodes. This cylinder block – inside the ignited mixture of gasoline and air and then gases forcing the pistons to move. Crank group transfers that energy to the crankshaft.

oil engine what is it

The timing Mechanism serves to provide the opening or closing of the intake and exhaust valves at the right time. It is needed in order to let the mixture in the cylinder and release exhaust gases. Also the engine is equipped with fuel supply system, ignition of the mixture and removal of exhaust.

The Principle of operation of the internal combustion engine

Everyone who is facing the car, have to know what engine the internal combustion engine and how it works. When the car owner turns the key in the ignition, the starter rotates the crankshaft. The piston under the action of the crankshaft is set in motion. When it reaches its lowest position, then moves to the movement in VMT. Then, in the combustion chamber is fed a mixture of fuel and air. When the piston moves upward, the mixture is compressed. At the moment when it reaches its upper extreme position, the spark generated by the spark will ignite the fuel mixture. There is an explosion, and gases with great force pushing the piston back down. In this moment opens the exhaust valve. Through him, the hot exhaust gases out of the cylinder into the atmosphere. When the piston will again lower dead point, it will go back to the top. During this time, the crank will make one revolution. what is the engine in the carWhen the piston will start a new movement opens the inlet valve and let the cylinder next portion of the combustible mixture. The latter will occupy the whole volume of exhaust gases. Further, the described process begins anew. As the work piston in these primitive engines are limited to only two clock cycles, it makes smaller movements than the four-stroke engine. Also reduced loss of energy to friction. But in the process generates a lot of heat and these motors stronger heated.

You Must use oil of the internal combustion engine. What is it? It is a special oily liquid made from hydrocarbons, which reduces the friction surfaces. In a two-stroke engine the piston also performs the function of the mechanism timing, opening and closing valves. The main drawback of this system – ineffective gas exchange in comparison with four-stroke unit.

Conclusion

That's what the engine in the car. This is the mechanism that moves the heavy car. Today this is taken for granted, but at the time, DIC was considered the greatest breakthrough.


Article in other languages:

AR: https://tostpost.com/ar/cars/16453-what-is-the-engine-in-the-car.html

BE: https://tostpost.com/be/a-tamab-l/31910-shto-takoe-dvs-a-tamab-l.html

DE: https://tostpost.com/de/autos/31583-was-ist-der-verbrennungsmotor-im-auto.html

ES: https://tostpost.com/es/coches/31449-qu-es-el-ice-en-el-coche.html

HI: https://tostpost.com/hi/cars/18074-what-is-the-engine-in-the-car.html

JA: https://tostpost.com/ja/cars/16143-what-is-the-engine-in-the-car.html

KK: https://tostpost.com/kk/avtomobil-der/32233-b-l-dvs-avtomobil-de.html

PL: https://tostpost.com/pl/samochody/33292-co-to-jest-w-silniku-w-samochodzie.html

PT: https://tostpost.com/pt/carros/33031-o-que-dvs-no-carro.html

TR: https://tostpost.com/tr/arabalar/28644-nedir-dic-ara-ta.html

UK: https://tostpost.com/uk/avtomob-l/32445-scho-take-dvs-v-avtomob-l.html

ZH: https://tostpost.com/zh/cars/7764-what-is-the-engine-in-the-car.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Cutting the tire tread machine

Cutting the tire tread machine

When the tread pattern starts to disappear from the surface of the tire, the motorist asks a question about whether there will be enough wheel for the season. There is a miracle way to extend the life of worn-out tires with cut tr...

Chinese

Chinese "Japanese" Isuzu Elf

for anybody not a secret that in China, on a par with cars of their own brands, collect many brands of European, American and Japanese automobile industry. Happens all the enterprises with modern equipment, and as the Chinese...

Fuel pump low pressure diesel engine: basic features and purpose

Fuel pump low pressure diesel engine: basic features and purpose

the car Engine is often compared to the human heart. And the resemblance really is. Through the heart one can live and the vehicle through the motor to move. The heart pumps the blood in the body – provides circulation to al...

Replacement of shock absorbers of the car with his hands

Replacement of shock absorbers of the car with his hands

in order for the car was convenient and comfortable to move in, required proper operation of the suspensions. In addition to comfort, this is also necessary for safety on the roads. If suspension system is faulty, it can pull an a...

The car pulls to the left: causes. Adjustment of wheel alignment

The car pulls to the left: causes. Adjustment of wheel alignment

each driver question the quality and proper operation of the vehicle in the first place. When it comes to steering and its efficiency, there is a need to be especially careful and exercise caution. Steering – one of the most...

Brake pads: replace with your own hands

Brake pads: replace with your own hands

in order to be sure of the safety of travel, you should always monitor the condition of the brake system of your car. And one of its main components are the brake pads. Replacement of these parts on all modern vehicles, both domes...