What is diesel? The working principle, structure and technical characteristics of the diesel engine

Date:

2020-01-15 23:20:19

Views:

508

Rating:

1Like 0Dislike

Share:

Table of contents:

Diesel engines are quite common on cars. Many models have at least one option in the engine range. And this is excluding trucks, buses and construction equipment where they are used everywhere. Further considered that such diesel, design, working principle, features.

Definition

This machine is a positive displacement internal combustion engine, the operation of which is based on the spontaneous ignition of the pulverized fuel from heat or compression.

What diesel

Design Features

The Gasoline engine has the same structural elements as that of diesel. The scheme of functioning in General are also similar. The difference is that the processes of formation of the fuel-air mixture and its combustion. Besides, diesel engines are more durable parts. This is due to about twice higher compression ratio than gasoline engines (19-24 vs 9-11).

Classification

According to the construction of the combustion chamber of diesel engines are divided into options with a separate combustion chamber and direct injection.

In the first case, the combustion chamber is separated from the cylinder and connected with it by canal. Compression entering the chamber of the vortex type air twists, which improves mixture formation and auto-ignition, which starts there and continues in the main chamber. Diesel engines of this type have previously been distributed in passenger cars due to the fact that they were low noise and a large speed range from the following options.

diesel won't start

In diesel engines with direct injection the combustion chamber is in the piston, and the fuel is newportnews space. This design was originally used on the slow speed engines of large volume. They had a high level of noise and vibration and low fuel consumption. Later, with the advent of the fuel high-pressure pumps with electronic control and optimization of the combustion process, the designers have achieved stable operation at a range of up to 4500 rpm./min. in addition, increased efficiency, reduced noise and vibration. Among the measures to reduce the hardness of work – multistage predpis. Due to this, the engines of this type received in the last two decades, extensive proliferation.

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Diesel engine

The principle of operation of diesel engines are divided into four-stroke and two-stroke, and diesel engines. Their features are outlined later.

Principle of operation

To understand what is diesel and what is its functional features, it is necessary to consider the principle of operation. The above classification of reciprocating internal combustion engines based on the number of clock cycles within the operating cycle that set the magnitude of the crankshaft angle.

Consequently, the operating cycle four-stroke engines consists of 4 phases.

  • Admission. Occurs when the rotation of the crankshaft from 0 to 180°. The air passes into the cylinder through the open at 345-355° inlet valve. At the same time while turning the crankshaft by 10-15° open exhaust valve that is called the overlap.
  • Compression. the Piston is moving up in 180-360°, compresses the air in 16-25 times (compression), and the inlet valve closes at the beginning of the measure (at 190-210°).
  • Stroke extension. Occurs when 360-540°. At the beginning of the stroke until the piston is top dead center the fuel is delivered into the hot air and ignited. It is a feature of diesel engines which distinguishes them from petrol where the spark advance. Released when the products of combustion push the piston down. The time of combustion is equal to time of its submission injector and lasts no longer than the duration of the stroke. That is, when the working process, the gas pressure constantly, with the consequence that diesel engines develop more torque. Another important feature of such engines is the provision of excess air in the cylinder as the flame occupies a small part of the combustion chamber. That is, different ratio of air-fuel mixture.
  • Release. When 540-720° of rotation of the crankshaft exhaust valve open piston moves up, it displaces the exhaust gases.

Characteristics of a diesel engine

Two-stroke cycle is characterized by shorter phases and a single process of gas exchange in the cylinder (scavenging), occurring between the end of the stroke and beginning of compression. When the piston moves down the combustion products are removed through the vents or the window (in the wall of the cylinder). Later open the inlet ports for the admission of fresh air. When the piston rises, all Windows are closed and compression begins. A little before reaching the TDC is injected and ignited fuel that starts the extension.

diesel fuel Consumption

Due to the complexity of ensuring the purge of the vortex chamber of two-stroke engines are only with direct injection.

The Performance of such engines above 1.6-1.7 times than the characteristics of the diesel engine four-stroke type. Its growth is twice as more frequent implementation of strokes, but partially reduced due to their smaller size and purge. Due to the doubledthe number of working strokes the two-stroke cycle is particularly relevant in the case of inability to increase speed.

The Main problem with these engines is the scavenging of short duration that cannot be compensated for without the loss of efficiency due to shortening of the stroke. Besides it is impossible to separate the exhaust and fresh air, causing the part of the latter is removed from the exhaust gases. This problem can be solved by ensuring the timing of final Windows. In this case, the gases begin to leave before the purge and after the closing of the release cylinder is supplemented with fresh air.

In addition, when using one cylinder having difficulty with the timing of opening/closing Windows, so there are engines (RAP), in which each cylinder has two pistons moving in one plane. One of them controls the intake, the other – issue.

According to the implementation mechanism, purging is divided into the slit (window) and the valve-slit. In the first case, the Windows serve as both the inlet and outlet holes. The second option involves using them as intake vents, and the issue is the valve in the cylinder head.

Typically, two-stroke diesel engines used in heavy vehicles like ships, locomotives, tanks.

Fuel system

The Fuel equipment of diesel engines are much more complex than a petrol engine. This is due to the high requirements to accuracy of fuel delivery time, quantity and pressure. The main components of the fuel system – injection pump, injectors, filter.Test drive diesels

Widely used fuel injection systems (Common-Rail). It injects its two portions. The first of them small, which serves to increase the temperature in the combustion chamber (predites), which reduces noise and vibration. In addition, this system improves the low speed torque by 25%, reduces fuel consumption by 20% and the content of soot in the exhaust.

Fuel diesel

Turbo

Diesel engines are very widely used turbine. This is due to the higher (1.5-2) times the pressure of the exhaust gases that spin a turbine, which avoids turboyamy, providing the boost with lower revs.

Diesel scheme

Cold start

You Can find a lot of reviews that at low temperatures diesel won't start. The difficulty of starting such engines in cold conditions due to the fact that it requires more energy. To facilitate the process, they are equipped with pre-heater. This device provides a glow plug placed in the combustion chamber, which ignition heated air in them and work for another 15-25 seconds after starting to ensure the stable operation from cold engine. Due to this, the diesel engines start at temperatures from -30 to -25 °C.

Service Features

To ensure durability during operation it is necessary to know what is diesel and how to maintain it. The relatively low prevalence of the considered engines compared to petrol is partly due to a more complex service.

First of all it concerns the fuel system of high complexity. Because of this, diesel engines are extremely sensitive to content in the fuel of water and mechanical particles, and its repair is more expensive, as the whole engine compared to petrol of the same level.

In the case of turbines high demands on the quality of the engine oil. Her life is usually around 150 thousand km and the cost is high.

In any case, on diesel engines to change the oil more often than petrol (2 times by European standards).

As mentioned, these motors have issues cold starting, when low temperatures will not start diesel. In some cases this is caused by use of improper fuel (depending on the season on such engines use a variety of varieties, as summer fuel at low temperatures solidifies).

Performance

Besides, many people do not like such qualities of diesel engines as the smaller capacity and the operating speed range, higher noise and vibration.

The Gasoline engine is usually superior in performance, including liter power similar to diesel. A motor of this type has a higher and flat torque graph. Increased compression ratio for more torque, forcing you to apply more durable materials. Since they are heavier, power decreases. Besides, it affects the weight of the engine, and hence of the car.

A Small operating speed range due to the longer combustion of the fuel, resulting in high revs it does not have time to burn out.

Elevated levels of noise and vibration causes a sharp pressure increase in the cylinder upon ignition.

The Main advantages of diesel engines are considered more high tegometall, efficiency and environmental friendliness.

Tegometall, that is, high torque at low rpm due to the fuel combustion as injection. This provides great responsiveness and facilitates efficient use of power.

Efficiency is due to both low flow and the fact that the fuel for diesel is cheaper. Toalso possible to use a low-grade heavy oils due to the absence of strict requirements to evaporation. And heavier than the fuel, the higher the efficiency of the motor. Lastly, diesels work on poor mixtures in comparison with petrol engines and high compression. The latter provides smaller heat loss from the exhaust gases, that is, greater efficiency. All these measures reduce fuel consumption. Diesel, because of this, it spends 30-40% less.

The Environmental friendliness of diesel engines due to the fact that their exhaust gases below the content of carbon monoxide. This is achieved by using advanced cleaning systems, so now the gasoline engine meets the same environmental standards, and diesel. A motor of this type earlier is much inferior to petrol in this respect.

Usage

As is clear from what is diesel and what are its characteristics, these motors are best suited for those cases when you need high thrust at low rpm. So they equip almost all the buses, trucks and construction equipment. With regard to private vehicles, including such parameters are most important for SUVs. Due to the high efficiency of these motors equip and urban models. In addition, they are easier to manage in such conditions. Test drive diesels testify.


Article in other languages:

AR: https://tostpost.com/ar/cars/20690-what-is-diesel-the-working-principle-structure-and-technical-character.html

BE: https://tostpost.com/be/a-tamab-l/38305-shto-takoe-dyzel-pryncyp-pracy-prylada-tehn-chnyya-haraktarystyk-dyzel.html

DE: https://tostpost.com/de/autos/37894-was-ist-diesel-das-prinzip-der-arbeit-das-ger-t-und-die-technischen-da.html

ES: https://tostpost.com/es/coches/37667-qu-es-diesel-el-principio-de-trabajo-la-unidad-y-datos-t-cnicos-del-mo.html

HI: https://tostpost.com/hi/cars/22333-what-is-diesel-the-working-principle-structure-and-technical-character.html

JA: https://tostpost.com/ja/cars/20313-what-is-diesel-the-working-principle-structure-and-technical-character.html

KK: https://tostpost.com/kk/avtomobil-der/38705-b-l-dizel-zh-mys-steu-princip-ryl-ysy-zh-ne-tehnikaly-sipattamasy-dize.html

PL: https://tostpost.com/pl/samochody/40289-co-to-jest-diesel-zasada-pracy-urz-dzenia-i-dane-techniczne-silnika-wy.html

PT: https://tostpost.com/pt/carros/39931-o-que-a-gasolina-princ-pio-de-funcionamento-e-caracter-sticas-t-cnicas.html

TR: https://tostpost.com/tr/arabalar/35167-nedir-dizel-al-ma-prensibi-cihaz-ve-teknik-zellikler-dizel-motor.html

UK: https://tostpost.com/uk/avtomob-l/39099-scho-take-dizel-princip-roboti-budovu-ta-tehn-chn-harakteristiki-dizel.html

ZH: https://tostpost.com/zh/cars/19699-what-is-diesel-the-working-principle-structure-and-technical-character.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

A filter separator for diesel fuel: design

A filter separator for diesel fuel: design

In the diesel fuel, which is sold at gas stations of our country, contains a lot of heavy and harmful engine contaminants. Also in the DT is bound to have the wax particles and water. If the car will be a long ride on such a fuel,...

Thermostat Vernet: customer feedback and service

Thermostat Vernet: customer feedback and service

the Thermostat is integral to the cooling system of the engine. He holds the coolant until the engine warms up and opens when reaching a specific operating temperature (usually equal to 95 degrees). The detail is in corrosive envi...

Stels Enduro 400: features, specifications, reviews

Stels Enduro 400: features, specifications, reviews

400-boiler Chinese Enduro is a special place on motorine. Made in China products does not seem to be phony, do not hurt the eyes of a monstrous design, not crumble to dust during operation. Motorcycles, of course, inferior in tech...

Tuning Volkswagen Golf 3 their hands

Tuning Volkswagen Golf 3 their hands

German cars occupy a leading position in the global market. However, the Volkswagen Golf 3 tuning for some motorists relevant, because there is no limit to perfection. To perform the modernization of the machine is quite accessibl...

Car mats Eva-drive: overview, description, features and reviews

Car mats Eva-drive: overview, description, features and reviews

Cleanliness in the car – this is one of the most important indicators of presentability and grooming machines. Carpet best protect quality rubber mats. It would seem that part of the vehicle is negligible, but, according to ...